Hi,
many distributions have something like a 'switch' command such that an
ordinary user can switch the version of his/her default gcc compiler.
Is there something similar in GenToo?
Many thanks for a hint,
Helmut.
Am 24.02.2011 01:48, schrieb Alex Schuster:
Looks like normal behaviour to me. @system should be a small set, but
when some packages in @system have kde USE flags, they will pull in KDE
stuff.
One can make an easy test to see how that works:
USE=-kde emerge -e @system -vp
Total: 181 packages
In linux.gentoo.user, you wrote:
Hi,
many distributions have something like a 'switch' command such that an
ordinary user can switch the version of his/her default gcc compiler.
Is there something similar in GenToo?
Many thanks for a hint,
$ gcc-config -h
--
Regards,
Gregory.
In linux.gentoo.user, you wrote:
Hi,
many distributions have something like a 'switch' command such that an
ordinary user can switch the version of his/her default gcc compiler.
Is there something similar in GenToo?
Many thanks for a hint,
Forgive previous post. Didn't read it properly.
Sebastian Beßler wrote:
One can make an easy test to see how that works:
USE=-kde emerge -e @system -vp
Total: 181 packages
emerge -e @system -v
Total: 436 packages,
The kde-useflag pulls in a waste of packages
In my system-set are 50 packages:
emerge @system -vp
Total: 50 packages
Walter Dnes wrote:
On Wed, Feb 23, 2011 at 09:57:00AM -0600, Dale wrote
I tried a pretend emerge of khelpcenter. I had to unmask dbus and
allow a bunch of use flags before it would run. Here's what I ended up
with...
USE=accessibility kde dbus qt3support ssl handbook exceptions emerge -pv
Am 24.02.2011 13:32, schrieb Dale:
My world file is fine. I went through it a while back and it is fairly
small. It's the system set that is larger than normal.
Your system set has 50 entries, that seems to be absolutly normal.
The high count of entries in emerge -e @system comes from
Sebastian Beßler wrote:
Am 24.02.2011 13:32, schrieb Dale:
My world file is fine. I went through it a while back and it is fairly
small. It's the system set that is larger than normal.
Your system set has 50 entries, that seems to be absolutly normal.
The high count of entries in emerge -e
On 02/23/2011 03:42 AM, Joost Roeleveld wrote:
On Tuesday 22 February 2011 14:51:31 Mick wrote:
On 22 February 2011 14:19, dhk...@optonline.net wrote:
- Original Message -
From: Mick
There was a change in the default ssh encryption algorithm. You may
want to check if that is
Am 24.02.2011 14:03, schrieb Dale:
If I do this:
USE=-* emerge -pv system
I get this:
Total: 50 packages (50 reinstalls)
What a difference USE flags makes huh?
You forgot to add the e, without it you reinstall only the 50 packages
in @system, because the dependencies are all there at
In linux.gentoo.user, you wrote:
Sebastian Beßler wrote:
Am 24.02.2011 13:32, schrieb Dale:
My world file is fine. I went through it a while back and it is fairly
small. It's the system set that is larger than normal.
Your system set has 50 entries, that seems to be absolutly normal.
The
On 24 February 2011 13:17, dhk dhk...@optonline.net wrote:
On 02/23/2011 03:42 AM, Joost Roeleveld wrote:
On Tuesday 22 February 2011 14:51:31 Mick wrote:
On 22 February 2011 14:19, dhk...@optonline.net wrote:
- Original Message -
From: Mick
There was a change in the default ssh
Sebastian Beßler wrote:
Am 24.02.2011 14:03, schrieb Dale:
If I do this:
USE=-* emerge -pv system
I get this:
Total: 50 packages (50 reinstalls)
What a difference USE flags makes huh?
You forgot to add the e, without it you reinstall only the 50 packages
in @system, because the
Elaine C. Sharpe wrote:
I use fluxbox and sometimes wmaker. Probably a lot of people are put
off by the default configs, but both offer extremely powerful and
versatile customization tools. Add your fave terminal emulator (I
recommend terminator for it's killer feature set) and conky for system
On Thu, 24 Feb 2011 07:03:06 -0600, Dale wrote:
I just wonder if the devs have noticed how much this has grown when
packages with X flags are included in the system set?. Would Gnome do
the same? What about other GUI's?
What does it matter? They are only dependencies of @system, but they
Neil Bothwick wrote:
On Thu, 24 Feb 2011 07:03:06 -0600, Dale wrote:
I just wonder if the devs have noticed how much this has grown when
packages with X flags are included in the system set?. Would Gnome do
the same? What about other GUI's?
What does it matter? They are only
On 02/23/2011 02:51 PM, Mick wrote:
On Wednesday 23 February 2011 22:45:18 Mick wrote:
On Wednesday 23 February 2011 18:54:12 walt wrote:
On 02/23/2011 08:28 AM, Mick wrote:
Hi All,
I noticed that since I installed xorg-server-1.9.4 my screen will not
go into standby anymore ...
According
On Thu, 24 Feb 2011 09:21:54 -0600, Dale wrote:
I was always under the impression that @system was supposed to be a
limited set of packages to build, including dependencies. For me, if I
have a issue, I usually start with emerge -e system to see if it
helps. Since there is some KDE stuff
Mick wrote:
On Wednesday 23 February 2011 19:21:34 Dale wrote:
When I upgraded to KDE4, I had to start using xset to handle turning my
monitor off. I put it in the startup section and it seems to work OK.
This is strange - I added Option DPMS on under the Monitor section in
Hello,
Well running a routine --depclean somehow
I lost the only copy of gcc on the system
CFLAGS=-march=k8 -msse3 -O2 -pipe
CHOST=x86_64-pc-linux-gnu
CXXFLAGS=${CFLAGS}
I have a a similar system set like this:
CFLAGS=-march=k8 -O2 -pipe
CHOST=x86_64-pc-linux-gnu
CXXFLAGS=${CFLAGS}
Since
James wirel...@tampabay.rr.com writes:
Harry Putnam reader at newsguy.com writes:
But still, when I'm trying to measure how much data is moving
emerge bwmon,
It measures across the ethernet ports, so adjust your test,
according to what you want to measure, crossing the ethernet
port
Am 24.02.2011 16:21, schrieb Dale:
I was always under the impression that @system was supposed to be a
limited set of packages to build, including dependencies. For me, if I
have a issue, I usually start with emerge -e system to see if it helps.
Since there is some KDE stuff in there, that
Neil Bothwick wrote:
On Thu, 24 Feb 2011 09:21:54 -0600, Dale wrote:
I was always under the impression that @system was supposed to be a
limited set of packages to build, including dependencies. For me, if I
have a issue, I usually start with emerge -e system to see if it
helps. Since
On Thu, Feb 24, 2011 at 7:21 AM, Dale rdalek1...@gmail.com wrote:
Neil Bothwick wrote:
On Thu, 24 Feb 2011 07:03:06 -0600, Dale wrote:
I just wonder if the devs have noticed how much this has grown when
packages with X flags are included in the system set?. Would Gnome do
the same? What
James wrote:
Hello,
Well running a routine --depclean somehow
I lost the only copy of gcc on the system
CFLAGS=-march=k8 -msse3 -O2 -pipe
CHOST=x86_64-pc-linux-gnu
CXXFLAGS=${CFLAGS}
I have a a similar system set like this:
CFLAGS=-march=k8 -O2 -pipe
CHOST=x86_64-pc-linux-gnu
On Thu, Feb 24, 2011 at 9:41 AM, Mark Knecht markkne...@gmail.com wrote:
SNIP
I posted something a couple of years ago about using -java in
make.conf because I found with +java I got almost twice as many
packages in @system. (Except it wasn't @system at the time) I started
putting java
On 02/24/2011 08:53 AM, Mick wrote:
On 24 February 2011 13:17, dhk dhk...@optonline.net wrote:
On 02/23/2011 03:42 AM, Joost Roeleveld wrote:
On Tuesday 22 February 2011 14:51:31 Mick wrote:
On 22 February 2011 14:19, dhk...@optonline.net wrote:
- Original Message -
From: Mick
Am 24.02.2011 17:54, schrieb James:
Hello,
Well running a routine --depclean somehow
I lost the only copy of gcc on the system
[...]
Since there is no gcc-bin to emerge (ha ha)
I guess I'll have to copy over the binary of
orsys-devel/gcc-4.4.4-r2 from another system.
GUIDANCE
Hi,
does anyone have seq24 successfully running on an AMD64 system?
Is there any othe loop sequencer out there, which I could try?
Thank you very much in advance!
Best regards,
mcc
Dale rdalek1967 at gmail.com writes:
I lost the only copy of gcc on the system
I would be glad to email you the binary from mine if it would help.
Dale,
I have several system to copy from (thanks anyway).
Is that all I have to do, just copy over the binary?
then rebuild gcc via the
Florian Philipp lists at binarywings.net writes:
This should get you going:
http://www.gossamer-threads.com/lists/gentoo/user/168951?do=post_view_threaded#168951
ok, after reading I tried this:
emerge --usepkg gcc
which did not work.
Can you be more specific on the syntax?
It looks
On Thu, 24 Feb 2011 11:34:09 -0600, Dale wrote:
Actually, it is, because you told it to be. To me, KDE is not a system
package, because I run different USE flags to you. Gentoo gave you the
gun but you pointed it at your foot :)
I didn't tell portage to include KDE, qt, and a boatload of
Florian Philipp lists at binarywings.net writes:
Since there is no gcc-bin to emerge (ha ha)
I guess I'll have to copy over the binary of
orsys-devel/gcc-4.4.4-r2 from another system.
GUIDANCE on that is most welcome.
[...]
OK, if this the first step, then I'm confused.
/usr/bin has
On Thu, 24 Feb 2011 16:54:36 + (UTC), James wrote:
Since there is no gcc-bin to emerge (ha ha)
I guess I'll have to copy over the binary of
orsys-devel/gcc-4.4.4-r2 from another system.
GUIDANCE on that is most welcome.
quickpkg gcc on the other system, copy the gcc-*.tbz2 package from
james wrote:
Dalerdalek1967at gmail.com writes:
I lost the only copy of gcc on the system
I would be glad to email you the binary from mine if it would help.
Dale,
I have several system to copy from (thanks anyway).
Is that all I have to do, just copy over the
Neil Bothwick neil at digimed.co.uk writes:
GUIDANCE on that is most welcome.
quickpkg gcc on the other system,
copy the gcc-*.tbz2 package from
$PKGDIR on that to the broken system,
OK I ran 'quickpkg gcc' got this:
ls /usr/portage/packages/sys-devel
gcc-4.1.2.tbz2
On 02/24/2011 03:01 PM, Matthew Marlowe wrote:
On Thursday, February 24, 2011 10:09:22 am dhk wrote:
I still haven't gotten this to work. Am I the only one using this? The
ssh -i .ssh/id_dsa.pub host didn't work. I get a message Read from
socket failed: Connection reset by peer with or
On Thursday 24 February 2011 16:23:31 Dale wrote:
Mick wrote:
On Wednesday 23 February 2011 19:21:34 Dale wrote:
When I upgraded to KDE4, I had to start using xset to handle turning my
monitor off. I put it in the startup section and it seems to work OK.
This is strange - I added
Mick wrote:
On Thursday 24 February 2011 16:23:31 Dale wrote:
I think there is a thread where I asked the same thing. When I first
upgraded to KDE4, my monitor would not turn off unless I turned it off
myself. I set up a script that runs when I login to cut off the
monitor. I have
On Thu, Feb 24, 2011 at 6:15 AM, Helmut Jarausch
jarau...@igpm.rwth-aachen.de wrote:
Hi,
many distributions have something like a 'switch' command such that an
ordinary user can switch the version of his/her default gcc compiler.
Is there something similar in GenToo?
Many thanks for a
On Thu, 24 Feb 2011 21:29:50 + (UTC), James wrote:
quickpkg gcc on the other system,
copy the gcc-*.tbz2 package from
$PKGDIR on that to the broken system,
OK I ran 'quickpkg gcc' got this:
ls /usr/portage/packages/sys-devel
gcc-4.1.2.tbz2 gcc-4.1.2.tbz2.28680 gcc-4.3.4.tbz2
On Thursday 24 February 2011 18:09:22 dhk wrote:
On 02/24/2011 08:53 AM, Mick wrote:
Have you tried using ssh user@host to login with?
At first all I did was an update: emerge -uDN world . They when it
didn't work I removed all public and private keys and restarted sshd.
That didn't
On Thursday 24 February 2011 21:51:56 dhk wrote:
Thanks, but I've tried that. ssh'ing to the hostname and loopback
address work. However, when I go out to the WAN it doesn't. So I can't
ssh user@123.123.123.123 even though I have port 22 open on the switch
for my ip.
Just to state the
James wireless at tampabay.rr.com writes:
copy the gcc-*.tbz2 package from
$PKGDIR on that to the broken system,
then emerge -1k gcc.
emergeing gcc now (thanks Neil!)
One last question:
so I've learned the hard way
of the value of quickpkg.
Besides gcc, what is a good list
of critical
James wrote:
Jameswirelessat tampabay.rr.com writes:
copy the gcc-*.tbz2 package from
$PKGDIR on that to the broken system,
then emerge -1k gcc.
emergeing gcc now (thanks Neil!)
One last question:
so I've learned the hard way
of the value of quickpkg.
Besides
On Thu, Feb 24, 2011 at 11:34:09AM -0600, Dale wrote
I didn't tell portage to include KDE, qt, and a boatload of other stuff
to be part of @system. Did I enable the kde USE flag, yea. That should
be part of the world stuff not the system stuff. If I disable kde, qt
and all the others
On 02/24/2011 06:30 PM, Mick wrote:
On Thursday 24 February 2011 21:51:56 dhk wrote:
Thanks, but I've tried that. ssh'ing to the hostname and loopback
address work. However, when I go out to the WAN it doesn't. So I can't
ssh user@123.123.123.123 even though I have port 22 open on the
Dale rdalek1967 at gmail.com writes:
Besides gcc, what is a good list
of critical software to use guickpkg
as to keep backup binaries?
FEATURES=buildpkg sandbox fixpackages parallel-fetch --keep-going
I saw this (FEATURES=buildpkg) googling around.
1. What is a good list of software
Sometimes I think I'm the only gnome fan in this wild jungle of kde users,
pardon my paranoia.
Anyway, I went through the same problem with totem on my ~x86 and ~amd64
machines a few months ago, and now I've just hit it again on my last amd64
(gentoo-stable) machine because gnome-2.32.x just
James wrote:
Dalerdalek1967at gmail.com writes:
Besides gcc, what is a good list
of critical software to use guickpkg
as to keep backup binaries?
FEATURES=buildpkg sandbox fixpackages parallel-fetch --keep-going
I saw this (FEATURES=buildpkg) googling around.
1.
On 25/2/2011, at 1:08am, dhk wrote:
I don't have the nc comand. What package is it in?
net-analyzer/netcat
51 matches
Mail list logo
