The system keeps looping over inserted/ejected messages if the CAM is
inserted:
Nov 3 16:06:04 fraggle kernel: ACPI: PCI interrupt for device
:00:08.0 disabled
Nov 3 16:13:56 fraggle kernel: Linux video capture interface: v2.00
Nov 3 16:13:56 fraggle kernel: saa7146: register
David Härdeman wrote:
On Fri, November 9, 2007 03:33, Felix Domke wrote:
Banana Banana wrote:
On Nov 9, 2007 12:22 AM, Simon Hargreaves [EMAIL PROTECTED] wrote:
I'm using
2.6.12-gentoo-r6 #1 SMP kernel.
Try a more recent kernel?
No, this is not the
After checking out today's source code, I am getting the following
message when I reboot my computer (it does not happen when i manually
reload the modules):
Linux video capture interface: v2.00
dvb_ttpci: no version for ttpci_eeprom_parse_mac found: kernel tainted.
saa7146: register extension
nbsp;nbsp;Dear all,nbsp;
nbsp; Anybody know Ankaro's UCS51820 ? 8 channels Unicable Multischalter
Uciable with the chipset ST7LNB1.I can auto detect the all 8 channels,but not
stable,some times it only 6 or 7,lost the high 1980 and 2096.And I use the
tuner which is 0288+0194.Who know the
On Nov 9, 2007 11:16 AM, Stone [EMAIL PROTECTED] wrote:
After checking out today's source code, I am getting the following
message when I reboot my computer (it does not happen when i manually
reload the modules):
Fixed by make distclean.
Regards.
Hello Guys,
Here is my 2 cents worth . Glad to see that there are others
interested in this card too .
OM Ugarcina wrote:
OM Ugarcina wrote:
Alexander E. Patrakov wrote:
OM Ugarcina wrote:
Linux video capture interface: v2.00
PCI: Enabling device
Michael Krufky mkrufky at linuxtv.org writes:
You might want to take a look at the tda18271 driver recently merged
into the master branch, located under dvb/frontends ...
Perhaps this driver might be enough to bring up the tda18211-- I don't
have the spec for the 18211, so I cannot say
Patrick Bulteel linuxtv at bulteel.org writes:
Hi,
I have a dvb-s card with a CAM and my subscription card.
I get the message in
syslog that shows the CAM is detected and initialized.
However... I'm not sure
how to get the encrypted video. Since it's a DVB-S card
I thought szap would
MikeW wrote:
Michael Krufky mkrufky at linuxtv.org writes:
You might want to take a look at the tda18271 driver recently merged
into the master branch, located under dvb/frontends ...
Perhaps this driver might be enough to bring up the tda18211-- I don't
have the spec for the 18211, so I
Michael Krufky mkrufky at linuxtv.org writes:
It's not wrong -- it's just missing.
I said it before -- the driver is not tested with DVB-T --
I need a test case for it first. Feel free to send in a
patch, since you DO have that test case.
Cheers,
Mike Krufky
Sadly I have not yet
MikeW wrote:
Michael Krufky mkrufky at linuxtv.org writes:
It's not wrong -- it's just missing.
I said it before -- the driver is not tested with DVB-T --
I need a test case for it first. Feel free to send in a
patch, since you DO have that test case.
Cheers,
Mike Krufky
Sadly I
What dvb tuning command line utilities are there for linux at the
moment? The options I have a zap, but this does not tune to a service ID
it requires specified video and audio pids, or dvbtune which although
will tune into a service id it doesn't set the dvr0 device up for TS
recording as
Simon Hargreaves wrote:
David Härdeman wrote:
On Fri, November 9, 2007 03:33, Felix Domke wrote:
Banana Banana wrote:
On Nov 9, 2007 12:22 AM, Simon Hargreaves [EMAIL PROTECTED] wrote:
I'm using
2.6.12-gentoo-r6 #1 SMP kernel.
Il Friday 09 November 2007 17:37:24 Simon Hargreaves ha scritto:
The update to the latest kernel version has broken my recording
programme completely and now returns device busy. I'm using dvbtune
to set up the dvr0 device for TS recording but it's now locking the
device so no other program
Il Friday 09 November 2007 17:28:35 Simon Hargreaves ha scritto:
What dvb tuning command line utilities are there for linux at the
moment? The options I have a zap, but this does not tune to a
service ID it requires specified video and audio pids, or dvbtune
which although will tune into a
Simon Hargreaves wrote:
What dvb tuning command line utilities are there for linux at the
moment? The options I have a zap, but this does not tune to a service ID
it requires specified video and audio pids, or dvbtune which although
will tune into a service id it doesn't set the dvr0 device
Glad to inform, that I start working on Acorp DS110 PCI DVB-S driver.
The card contains DM1105 chip to receive DVB Transport Stream with PCI
interface.
--
Igor M. Liplianin
___
linux-dvb mailing list
linux-dvb@linuxtv.org
Manu Abraham wrote:
Simon Hargreaves wrote:
What dvb tuning command line utilities are there for linux at the
moment? The options I have a zap, but this does not tune to a service ID
it requires specified video and audio pids, or dvbtune which although
will tune into a service id it
Simon Hargreaves wrote:
Manu Abraham wrote:
Simon Hargreaves wrote:
What dvb tuning command line utilities are there for linux at the
moment? The options I have a zap, but this does not tune to a service
ID it requires specified video and audio pids, or dvbtune which
although will tune
Thomas Kaiser wrote:
thomas schorpp wrote:
Thomas Kaiser wrote:
Oliver Endriss wrote:
Thomas Kaiser wrote:
Hi
I read this thread
http://www.linuxtv.org/pipermail/linux-dvb/2007-February/015663.html
but I can not figure out if this card is now supported by linux-dvb?
Should be supported
Hi,
2007/11/6, Olivier GARET [EMAIL PROTECTED]:
Hi,
DVB-T has just arrived in our town.
I made a frequency file, that you can find in attachment.
It works perfectly.
Hoping this is the right place to post...
Best Regards
Olivier
Added your information into the existing fr-Nancy (the
Hi,
2007/11/6, Arris [ML] [EMAIL PROTECTED]:
2 new transponder
I merged your file with the existing at-Offical, thanks :)
Christoph
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
I demand that thomas schorpp may or may not have written...
Thomas Kaiser wrote:
thomas schorpp wrote:
[snip]
xine works fine with dvb-c on my Ubuntu Desktop box :-) I just had to
copy the channels.conf file into the .xine folder in my home folder.
tell me with which magic?
this is all i
Simon Hargreaves a écrit :
What dvb tuning command line utilities are there for linux at the
moment? The options I have a zap, but this does not tune to a service ID
it requires specified video and audio pids, or dvbtune which although
will tune into a service id it doesn't set the dvr0
Hi all,
With regards to the case of multiple logical TS's we need to select
the logical stream from the multiplex. Here we have a stream identifier
comprising of 8 bits representing the streams. In this circumstance
the user needs to select the stream that he desires.
For the user to select
Hi,
On Fri, Nov 09, 2007 at 01:04:38AM +0100, [EMAIL PROTECTED] wrote:
[...]
i'm having problem with las multiproto (multiproto-bad6ebd6bf8c).
kaffeine (installed from synaptic on an ubuntu system) isn't able to display
any image. When watching a channel with kaffeine
[...]
Hi,
On Sat, Nov 10, 2007 at 01:04:30AM +0400, Manu Abraham wrote:
[...]
I do propose a format such as adding
IS:0xff
where IS implies Input Stream and 0xff defines the stream id.
to the end of the current config to denote Multiple streams and the
relevant Stream identifier, and
Greeting, Thierry! Fri, Nov 09, 2007 at 09:54:44PM +0100, thierry.merle wrote:
What are you using for EPG grabbing? Or for subtitles grabbing. I found
something called 'dvbsubs', but maybe there is something else?
--
Anton P. Linevich
___
Artem Makhutov wrote:
Hi,
On Sat, Nov 10, 2007 at 01:04:30AM +0400, Manu Abraham wrote:
[...]
I do propose a format such as adding
IS:0xff
where IS implies Input Stream and 0xff defines the stream id.
to the end of the current config to denote Multiple streams and the
relevant
Hi there,
After reading on the MythTV wiki that the VP7045A version of the Alpha is
supported since kernel 2.6.17, I purchased one yesterday.
lsusb reveals the device is seen, and in warm state and the dvb-usb module and
other stuff are loaded correctly. I cannot tune any
channels, and further
I want to thank everybody helped me. Can someone point me how to patch kaffeine
or Myth?
What is, the patch, supposed to do?
thanks again
-- Initial Header ---
From : Artem Makhutov [EMAIL PROTECTED]
To : [EMAIL PROTECTED] [EMAIL PROTECTED]
Cc : dvb linux
31 matches
Mail list logo
