in the to lines, even
though I wanted it to give me the person's address so I could cheaply take
it off the mailing list.
If someone really decides to make the change, please set the rewriter to put
both the originator and the mailing list on the reply to line.
Thanks for the discussion...
--
Todd
problems, let me/us know. I was thinking of using
this on a project I have in the near future. Thanks.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
Todd Denniston wrote:
David Soukal wrote:
Hello guys,
I'm sorry to bother you with something that's must have been answered
many times, but I can't find a quick answer in the documentation.
SNIP
The chapters compile fine, however, the master won't compile because of
multiple
.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
: More document styles
http://www.mail-archive.com/lyx-users@lists.lyx.org/msg01356.html
Search results for 'MLA style '
http://www.mail-archive.com/cgi-bin/htsearch?config=lyx-users_lists_lyx_orgrestrict=exclude=words=%22MLA+style+%22
Hope this is helpful.
--
Todd Denniston
Crane Division, Naval
Alexandru Cabuz wrote:
Hello,
I am using Lyx 1.3.6 on a fresh Debian testing install.
My favorite screen fonts are Helvetica, and I have them because I can see them
in /usr/X11R6/lib/X11/fonts/100dpi and in /usr/X11R6/lib/X11/fonts/75dpi.
These directories appear in /etc/fonts/fonts.conf
[EMAIL PROTECTED] wrote:
Hi
This is a warning^H^H^H^H^H^H^H blurb that I just finally upgraded the
wiki to the new wiki engine. I've eventually realised that I'm unable to
guarantee a perfectly smooth transition, so instead I'll just plunge in
and deal with any problems as they occur and get
Todd Denniston wrote:
Christian,
while looking at the changes coming up fro 1.4
http://wiki.lyx.org/LyX/NewInLyX14
I found that all of the links to pictures from that page, that I tried
http://wiki.lyx.org/uploads/LyX/NewInLyX14/default-toolbars.png%20%20%20uploads:/LyX/NewInLyX14/small-default
[EMAIL PROTECTED] wrote:
On Thu, 15 Dec 2005, Georg Baum wrote:
[EMAIL PROTECTED] wrote:
On Wed, 14 Dec 2005, Angus Leeming wrote:
http://validator.w3.org/checklink/
Hmm... I have to disable 'robots.txt', and it seems awfully slow. Thanks
anyway, I'll keep it in mind while looking at
Marc D. wrote:
The problem is that although I can see the included images
in the LyX screen, I cannot see the images when I select
View -- PDF (pdflatex). I can't even get Preview to show
anything if I pick the other two options (dvidpdm and 'ps to pdf').
With pdflatex, the PDF comes up, the
Jeremy C. Reed wrote:
On Tue, 24 Jan 2006, Roy Schestowitz wrote:
There was recently a thread about justification and hyphenation, but
particularly about tendency of margins to be dishonoured at times [1].
There were various solutions proposed. Insertion of a linebreak is, as you
already
://fedoraproject.org/wiki/Extras/UsingExtras
Cheers
JP
You wouldn't happen to know how to 'pin' a yum/FC package at a particular rev
would you?
I dislike when my tools take major jumps in their interfaces, while I am in
the middle of a project, like now.
--
Todd Denniston
Crane Division
), but have any of you entered these as enhancements you
want in bugzilla so they don't get lost?
http://bugzilla.lyx.org/enter_bug.cgi
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
Todd Denniston wrote:
Sanders, Maarten (M.J.L.) wrote:
Hi,
We use a lot of branches in modular end user manuals for our
equipment. Does anyone have an approach on dealing with not
branches? E.g., the piece of text applies to every piece of
equipment, except for no. 32. As you can imagine
of the windows system.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
will
probably see an 50% split.
3) Add a button with the purpose of toggle or switch to blank tabular, and
perhaps an config option to make blank default for the particular user. But
stick with the current as default. :)
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC
.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
newfile3.lyx
Description: application/lyx
' off the file name, I just don't
know the LaTeX to do it quickly.
Note also that it looks like you can use the above LaTeX code with any of the
RCS keywords. I also think that if you preferred some other VC system and it
provides keywords you could modify the above to work with it.
--
Todd
would help. Another option would be to use an external diff command and
customize it to ignore the line behind \begin_inset Note...)
Guenter
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
Jean-Marc Lasgouttes wrote, On 12/03/2007 11:03 AM:
Todd Denniston [EMAIL PROTECTED] writes:
Or how about an option that to me would make more sense:
A collapse|expand ALL button/setting/menu, that on collapse-able
elements had a similar effect to the View-Threads-Expand All
Threads|Collapse
electrónico también, en caso de los
que pueden hacer responder a su pregunta No saben leer español.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
we had an answer to that one:
http://wiki.lyx.org/FAQ/Pronunciation
SORT OF!!! :)
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
them in LaTeX documentation.
BTW this is my first reply to an email from inside a digest... it looks ok
from here, i.e., title ok and only the content I wanted to reply to, but
please cut me some slack if Thunderbird quietly makes a mess. :}
--
Todd Denniston
Crane Division, Naval Surface
' and test for that setting to
run either the current default tabular create function or the new no line
tabular create function.
The above is only my opinion, and I am only a, sometimes _mostly_ sane,
developer of _other_ software. :)
--
Todd Denniston
Crane Division, Naval Surface Warfare
barely
functional enough.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
John McCabe-Dansted wrote:
On 11/21/06, Todd Denniston [EMAIL PROTECTED] wrote:
LyX will use use at least RCS CVS as version control back-ends, CVS
can be
used from other systems connecting to a master repository system.
How do you use CVS as a back-end to the LyX-GUI?
Assuming you
this is helpful.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
that
our document policies want in ~5 places.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
the section linebreak behind paragraph-style, which lays the section label
text out like a section.
\makeatletter
[EMAIL PROTECTED]@}%
[EMAIL PROTECTED] -1ex [EMAIL PROTECTED] -.2ex}%
{1.5ex [EMAIL PROTECTED] .2ex}%
{\normalfont\normalsize\bfseries}}
\makeatother
--
Todd
.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
more.
Note 4.4.1 needs some help as some of the devs took out some table
functionality about adding and deleting rows and columns.
Hope this helps.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
a good solution?
http://wiki.lyx.org/FAQ/PDF#toc5
also as far as i can recall, the problem would exist in both ps2pdf and
pdflatex, because it is a problem with the font.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology
somewhat enjoyable to
read when you are not looking for something specific, i.e., as literature.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
already.
Or did I misread your desire here?
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
to do hand formating.
$0.02
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
it (assuming only one
pkgconfig directory).
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
set the pull down to To or cc instead of just To, you
should be happier.
Good luck.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
, and B) someone
updates http://wiki.lyx.org/Devel/ShowStoppers150 to indicate no show stoppers
are left?
You want to just do B? :P :)
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
{./Directory2/index.html}{name}
otherwise known as a relative link?
works for me in a minimal test on Linux, using either the info above in ERT or
putting the URL in using LyX's insert-URL.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power
}{Bibliography}
would do it for you? It worked for me in a quick test.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
links in pdf docs.
/gripe
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
test2.lyx
Description: application/lyx
voices, consider a
non insane margin size?
I (and my inner voices :) tend to use 1 inch on all[1] borders for article
class.
[1] Top, Bottom, Inner and Outer. I never had reason to mess with Head sep,
Head height or Foot skip.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center
file.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
http://www.crane.navy.mil/custfeedback
this is fundamentally the same approach Todd used.
Almost, except I was using [La]TeX variables so that you do not have to modify
the template file, just the variable defining file.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology
will continue for
some time, and this warning may be repeated at intervals if the message
remains undelivered. Eventually the mail delivery software will give up,
and when that happens, the message will be returned to you.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane
0x08143cb3 in lyx::LyX::exec (this=0xbf8d2840, ar...@0xbf8d2870,
argv=0xbf8d28f4) at LyX.cpp:343
#30 0x08070039 in main (argc=1, argv=Cannot access memory at address 0x4
) at main.cpp:46
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power
.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
newfile1.lyx
Description: application/lyx
,
and insert columns=fullflexible and upquote=true. The former gets rid of
kerning and the latter gets you the backtick character. (The vertical quote
seems to take care of itself.)
/Paul
Thanks, I'll give those a try as soon as I get back to _that_ document.
--
Todd Denniston
Crane Division
feel a
slight slowdown even on a
dual Xeon(R) CPU @ 2.83GHz, with 2GB of ram, on slower/smaller machines (dual
Xeon(TM) CPU @ 1.50GHz
.5GB) I have to keep it closed except when needed.
For rearranging the document though, the new (since 1.4) outline mode is
tremendously helpful.
--
Todd
.
It took a couple of hours to get fairly comfortable with it for me, but I had
not used a circuit
editor before, only DIA and a couple of CAD programs.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
-reporting instructions
in Help-Introduction
and send us a bug report, if necessary. Thanks !
Bye.
Aborted
-End message
So is this affecting current lyx 1.6.x on other distros?
bugzilla's hate me right now, not their fault though, so I am sending to the
list. :]
--
Todd Denniston
Crane
Pavel Sanda wrote, On 01/-10/-28163 02:59 PM:
Todd Denniston wrote:
So is this affecting current lyx 1.6.x on other distros?
not on gentoo. what qt version do you have installed?
pavel
Just so I am sure,
when you open/fire up lyx for steps 5-10, the outline pane is already open
JUST one buffer instead of the whole program. Of course I ended up getting
whole program shutdown. :)
I can generally live with that workaround, especially as it seems to affect not
very many folks.
Thanks again.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane
to Table
(auto), and the Table
toolbar will stay stuck on LyX User Interface until you undo the check mark,
thus less random scrolling.
I do this when I have a document in which I am doing a lot of table editing.
Hope this helps some.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center
. :)
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
Shahar Or wrote, On 03/24/2009 01:36 PM:
On ×’', 2009-03-24 at 09:21 -0400, Todd Denniston wrote:
Complex answer:
remove the version control file, i.e.:
rm RCS/mylyxfile.lyx,v
I don't have an RCS directory where my file is. Should I?
Making the assumption that you really do mean version
been compiling lyx-1.6.3 for EL5, it just has not been
passed out of testing yet.
(which reminds me, now that it is in the updates-testing directory, I can get
it downloaded and test it a bit myself now. :)
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing
Todd Denniston wrote, On 07/22/2009 08:41 PM:
Stasinski A. wrote, On 12/23/-28158 02:59 PM:
Hi,
I've built LyX 1.6.3 under Red Hat Enterprise 5.3, with Qt 4.5 (a
slightly older version than the most recent one, which I couldn't get
to work). Each time I try to open a directory to open
. Skipping...
texhash: Done.
Note, I'll also take hints on how to actually use the font on just some
selected text in an otherwise palatino document, after we can get LyX/LaTeX to
recognize the new font.
Thanks.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane
this
recurring discussion ;-)
+1
+1 [subject line munging sucks (spaces from subjects :)] And my mail client works fine for sorting
out messages based on 'To:', 'CC:' envelop headers (List-* and Mailing-List)
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane
://wiki.list.org/display/DOC/Mailman+2.1+Members+Manual
for some more details.
Using this knowledge in another email client is an exorcise left to the reader and other list
members. :)
Lyx on Linux, with out header munging. :0
Boy we have stepped off topic. :)
--
Todd Denniston
Crane Division, Naval
indicator of documents is more meaningful than a never updated hand version
marker. :}
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
) as its underlying system, so all
the RCS key words work as listed.
It is CVS that I use, and when I tested Kayvan's advice against my repository,
I found it working beautifully.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology
to postscript and use a program like mpage
to print it at 4 pages per page.
Good luck
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
/tips/tricks very useful over the years with out having, until now, ask
the questions myself.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat
to TeX PSTricks macros earlier today, and dia has a set of flowcharting
images. when I open the export I just did for a db flowchart image I see a
bunch of \curveto and \lineto so I would guess it could do what you want.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane
/texfaq2html?label=seccntfmt
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
Paul A. Rubin wrote:
Todd Denniston wrote:
Hello,
SNIP
what I need is (I am required to use it, I do not like it though as it adds
confusion by making top levels look like subsections):
1.0first top level section
1.1first subsection
1.1.1first subsubsection
2.0
something, or just missing something?
Do I have to go through the whole document changing the family to San
Serif?
[1] xforms version Layout - Document - Document tab.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
Uwe Stöhr wrote:
Todd Denniston wrote:
I assume in the Document Layout[1] the Fonts: selection of helvet is short
for helvetica. Is this correct?
Yes it is.
I also thought that helvetica was be definition a San Serif font... but when
I change the Fonts: selection to helvet (apply
in use at:
http://www.mail-archive.com/lyx-users@lists.lyx.org/msg06050.html
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
/
however the manual is in tex info format I think...not really sure what the
diff is between that and TeX.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
is not quite a pretty as the
tables normally are, but it does work.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
update.
At least that works for me.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
with your
logo.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
://www.ctan.org/tex-archive/help/Catalogue/alpha.html
Thanks for the help.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
back to a known (albeit broken) state.
I would also check to see if the editor/bib system you are using also can
version control your bib file too, or do it by hand calling RCS's `ci -l`
command.
good luck.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing
click Column/Row, Toggle the check
box marked Right in the Borders frame, this removes the extra border on
the right.
If you are done click the Close on Edit table settings.
Just modify which check box you want to clear if you are adding Column/Rows
in places other than the right edge.
--
Todd
.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
adding 1 to it.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
citation in your bib printed even if you do not
specifically reference it in your document?
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
Martin Henry H. Stevens wrote:
Thanks! See clarification below.
On Jul 1, 2005, at 3:13 PM, Todd Denniston wrote:
Martin Henry H. Stevens wrote:
SNIP
2. I cannot separate my references cited (using BibTeX) from the
document, so I have to open it in Acrobat and delete, the body
Todd Denniston wrote:
Martin Henry H. Stevens wrote:
SNIP
I think I need the .bib file, a separate file that contains the
(formatted) references cited in the document, and which has it's own
page numbering
Is that better?
SNIP
Ack... on re-reading your question, I see a different
to be numbered 1, and in the ERT put:
\setcounter{page}{1}
but it didn't subtract 15 from the document page number Well, I
tried!
Thoughts?
Hank
On Jul 1, 2005, at 4:00 PM, Todd Denniston wrote:
Todd Denniston wrote:
Martin Henry H. Stevens wrote:
SNIP
I think I need the .bib file
% and the other is 50% of the
column width. With the XForms GUI I right click the minipage to get to the
setting.
[1] I see \begin{minipage}[c]{0.45\columnwidth} in my LaTeX but do not in
yours.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology
Todd Denniston wrote:
ARG, reread your own message and find a very bad thinko.
SNIP
Guessing from the difference [1] in the LaTeX export from one of my
documents and the above LaTeX, you did not set the minipages to be STRICTLY
- less than 50% of the column width.
+ total less than 100
because its ~9k.
BTW, if someone feels these attached files would be useful to put these
files on the WIKI, you have my permission.
The problem returns if I close the file (without closing lyx) then reopen it.
Roger
On Thu, 30 Jun 2005 11:26 pm, Todd Denniston wrote:
SNIP
So you can see what
with qt by passing options to configure.
./configure --with-frontend=qt
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
the commands I used above from the following two pages:
http://theoval.cmp.uea.ac.uk/~nlct/latex/novices/node69.html
http://www.tex.ac.uk/cgi-bin/texfaq2html?label=addtoreset
Hope it helps.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power
Roger McMurtrie wrote:
On Thu, 7 Jul 2005 12:22 am, Todd Denniston wrote:
Roger McMurtrie wrote:
I don't have a \fontscheme in lyx, nor can I see it in the LaTeX log file
(View-LaTeX Logfile).
It would actually be in the .lyx file and you would need to use
less||vi||cat||grep
want to backup your ~/.lyx/
directory first.
Good luck.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
sequence is from the XForms interface QT might be some
what different.
in an ERT, just before the BibTeX Generated Refrences, insert
\renewcommand{\refname}{Works Cited}
(works for me)
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology
with a parbox...
Robert
Also check out Juergen Spitzmueller's email (as it is easier to see what is
going on if you use LyX's builtin), but if you want it centered verticaly
you need to put the \vspace*{\fill} both above AND BELOW the thing(s) you
want to center.
--
Todd Denniston
Crane Division
image, so set both and when one is hit and the
Maintain aspect ratio check is done it stops expanding. But this is only a
suspicion / guess.
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
-Century-1-fill-in-the-blanks.pdf
16th-Century-1-fill-in-the-blanks.pdfType: Portable Document Format
(application/pdf)
Encoding: base64
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power
, but when I try to underbar it, it just
compresses back up to no space... most confusing.
but if I put in protected blanks (the same number of them as was letters in
the word) the underbar works correctly and looks ok. see the second
paragraph in the attachment.
Painful but works.
good luck.
--
Todd
that a key-combo
would only encourage forced page breaks.
perhaps the need for a forced page break is better
solved in a different
way?
__
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
--
Todd Denniston
Crane Division, Naval
in the to lines, even
though I wanted it to give me the person's address so I could cheaply take
it off the mailing list.
If someone really decides to make the change, please set the rewriter to put
both the originator and the mailing list on the reply to line.
Thanks for the discussion...
--
Todd
1 - 100 of 297 matches
Mail list logo
