Den 27-01-2019 kl. 19:45 skrev trondd:
On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote:
I'm trying to replace my dieing soekris box with an apu2 dmesg below.
However, I can't seem to get em0 to connect to my isp. It will work
when connecting to the soekris box though. So I don't think
Den 08-09-2018 kl. 14:47 skrev Pierre Emeriaud:
Le sam. 8 sept. 2018 à 13:40, Jay Hart a écrit :
-ifconfig -A from the router--
re1: flags=8843 mtu 1500
lladdr 00:22:4d:d1:48:d5
inet 192.168.1.1 netmask 0xff00 broadcast 192.168.1.255
Some CPEs have
OpenBSD lists wrote:
Most of the spam I've received from marketing companies tends to come
from send-only servers (looking at the user-agent of the sending server
its some kind of Python library intended for just sending pre-formatted
messages to a list of recipients).
What I've done is
Jonathan Gray wrote:
On Fri, Nov 27, 2015 at 12:56:36AM +0100, Mikkel C. Simonsen wrote:
Today I installed an Intel 82546EB dual-port NIC in a Fujitsu Siemens
Futro S400, that I plan to use as a router/firewall.
Only one of the interfaces shows up in dmesg, and it's not working after
boot
Today I installed an Intel 82546EB dual-port NIC in a Fujitsu Siemens
Futro S400, that I plan to use as a router/firewall.
Only one of the interfaces shows up in dmesg, and it's not working after
boot. Is this a known problem, and is there a fix? Full dmesg attached.
Mikkel C. Simonsen
Max Power wrote:
which is the exact name for it? (In computer way naturally...)
Havelåge - the Danish way.
Best regards,
Mikkel C. Simonsen
data through some of the GPIO pins. Is this possible
to achieve somehow on OBSD supported hardware?
Best regards,
Mikkel C. Simonsen
qualify as small.
If small rather than very small will work, a thin client with a PCI slot
would work. They usually have 800MHz+ CPUs, DIMM sockets for memory and
they are cheap on eBay.
Best regards,
Mikkel C. Simonsen
,
Mikkel C. Simonsen
repays95...@mypacks.net wrote:
I've installed OpenBSD 5.5/amd64 on an HP workstation. I'd like to
add additional SATA drives and add USB 3.0 (for backup to umass)
Why not get a card with an eSATA port for backup?
Best regards,
Mikkel C. Simonsen
that support that, or
connect a CD-drive to the IDE connector. In all cases I have installed
on the internal flash module. Larger modules are available at low cost.
Best regards,
Mikkel C. Simonsen
: connect: connection timed out
It's not an OpenBSD/Lynx specific problem. I just tried connecting with
SeaMonkey (on /2), and I get a time-out also.
Best regards,
Mikkel C. Simonsen
from FreeBSD 8.x and SunOS 5.10 too,
so maybe it's more like only OpenBSD can't connect?
If you read my previous reply, you'll see that /2 is blocked also :)
Best regards,
Mikkel C. Simonsen
.
Best regards,
Mikkel C. Simonsen
, use a standard RS-232
interface.
Best regards,
Mikkel C. Simonsen
. Everybody looses.
But then I live in a country that, unlike the USA, actually has freedom
of speach...
Best regards,
Mikkel C. Simonsen
in the PCI slot.
Best regards,
Mikkel C. Simonsen
will work great. No need for a separate phone line anymore.
Best regards,
Mikkel C. Simonsen
floppy drive and one disk
- why make it more complicated?
Best regards,
Mikkel C. Simonsen
, you can install the wireless card in the box.
The Raspberry Pi is a nice toy, but it's still just a toy - in my opinion.
Best regards,
Mikkel C. Simonsen
box... in fact many still autolearn as ham.
I use bogofilter, and it tags almost all spam from this mailing list as
spam. There is an occasional false positive also though...
Best regards,
Mikkel C. Simonsen
Eric Oyen wrote:
is it me or does there seem to be a lot more spam on the lists of late?
Bogofilter removes almost all the spam for me. But when somebody replies
to it, the spam does get through ;)
Best regards,
Mikkel C. Simonsen
Joe S wrote:
I'm looking to build a new mini-itx firewall based on OpenBSD and
would like to get some advice on CPU selection.
I use 800MHz Via C3s or 266MHz Geodes for 15/15 links. Both work great.
Best regards,
Mikkel C. Simonsen
, that's what the Bundestrojaner is for :)
Best regards,
Mikkel C. Simonsen
Mostaf Faridi wrote:
I need help
Then call your ISP and ask them to help you. Nobody else can. If they
can't help you, get a better ISP.
Best regards,
Mikkel C. Simonsen
OpenBSD MailingList wrote:
and receive a lot of spam mail through the lists.
I only receive a couple a day - no problem at all.
Just wondering how other subscribers solving this mather ?
I use the messages that pass through for training bogofilter :)
Best regards,
Mikkel C. Simonsen
available on eBay), come with something like 256MB
RAM, 512MB flash and a PCI slot for a second NIC. They work well for
firewalls, they are silent and consume small amounts of power (a bit
more than Soekris/Alix though).
Best regards,
Mikkel C. Simonsen
subscribe
request I have sent (to the address listed on benzedrine.cx), gets
rejected as spam...
Best regards,
Mikkel C. Simonsen
sirif=fxp0
tdcif=fxp1
table web const {1.2.3.171, 1.2.3.164}
table post const {1.2.3.165, 1.2.3.168}
table sirocco const {1.2.3.172}
table sir const {1.2.3.160/28}
table
28 matches
Mail list logo
