Hi,
the keys name and phone are not included in the reference line using the
minimal example from the correspondence manual below. The reference line just
contains the date. Also changing the alternative from a to b has no effect.
What am I missing?
I upgraded to the latest beta and the
Hi,
the keys name and phone are not included in the reference line using the
minimal example from the correspondence manual below. The reference line
just contains the date. Also changing the alternative from a to b has no
effect. What am I missing?
You have to pass the settings to
[...] I'm struggling to get the enclosures into an itemized list. This
used to work with the old letter module but now fails:
\startletter[enclosure={A\\B\\C}, ...] -- encl: AcrlfBcrlfC
In http://www.ntg.nl/pipermail/ntg-context/2012/064721.html Wolfgang
proposed
[...] I'm struggling to get the enclosures into an itemized list. This
used to work with the old letter module but now fails:
\startletter[enclosure={A\\B\\C}, ...] -- encl: AcrlfBcrlfC
In http://www.ntg.nl/pipermail/ntg-context/2012/064721.html Wolfgang
proposed
is there anyone else who knows where the current correspondence docu
resides? I tried again to locate it but to no avail.
There is some guidance about what's new in these messages:
http://www.ntg.nl/pipermail/ntg-context/2012/064695.html
Wolfgang:
I have an old letter that typesets fine with beta 2011.11.29 23:11 but that
fails with anything newer than that.
I get lots of Undefined control sequence and \textwidth seems to expand to
something without a unit: Illegal unit of measure (pt inserted).
Anyway, I guess there
Wolfgang:
I have an old letter that typesets fine with beta 2011.11.29 23:11 but that
fails with anything newer than that.
I get lots of Undefined control sequence and \textwidth seems to expand to
something without a unit: Illegal unit of measure (pt inserted).
Anyway, I guess there are big
Can someone help? By some incantation that I cannot now seem to
reproduce, I was able to obtain and install:
mtx-context | current version: 2011.11.14 16:17
In an attempt to update this version, I ran first-setup.sh found at
http://minimals.contextgarden.net/setup/first-setup.sh and
According to statistics of distribution downloads (just counting
unique IPs, so not absolutely accurate), windows users amount to
17-20% downloads. Wiki gets 46% of windows users.
Have you ever googled for something context related? You end up mostly with
false positives because context can
Hi,
how do I get an additional space after the comma separating the years in this
cite?
(Hagen, 2010b,2011) -- (Hagen, 2010b, 2011)
Minimal example:
\setupbibtex[database=sample]
\setuppublications[alternative=apa, refcommand=authoryears]
\starttext
\cite[hh2010a, hh2011]
\stoptext
Also add
Hi,
is it possible to '\unskip' the last comma or period? This would be handy for
defining the publication layout using \setuppublicationlayout. I have bibtex
entries ending with period and adding another one looks odd.
Thanks,
Florian
Hi,
citing multiple authors with \cite[author1, author2, ...] is no problem but
referencing multiple figures/sections does not work:
\in{Figures}[fig:one, fig:two]
Is there a way to circumvent repeating successive \in[...]?
What about automatic page ranges for \at? This could be interesting...
On Apr 18, 2011, at 21:14 , Hans Hagen wrote:
On 18-4-2011 7:16, Wolfgang Schuster wrote:
\def\floatcaptionattribute
{\iflocation \ifnofloatnumber \else \ifnofloatcaption \else
\ifinsidesplitfloat \else
attr \destinationattribute \currentfloatattribute
\fi \fi \fi \fi}
ok,
core-con.mkiv
\def\dodate[#1][#2]%
{\begingroup
\iffirstargument
\getparameters[\??da][d=\normalday,m=\normalmonth,y=\normalyear,#1]%
\normalday \@@dad\relax
\normalmonth\@@dam\relax
\normalyear \@@day\relax
\fi
- \docurrentdate{#2}%
+ \docurrentdate[#2]%
Hi,
this used to work in beta 2011.04.03 22:32 but now it doesn't anymore:
\starttext
\date\par
\date[][year,--,mm,--,dd]\par
\date[][year,{--},mm,--,dd]
\stoptext
Florian
___
If your question is of interest to
2) How do I get a small and bold header? This does not work:
\bTABLE
\setupTABLE[style=\tfx]
\setupTABLE[row][1][style=\bfx] % redundant w/ line 5
\bTABLEhead
\bTR[style=\bfx] \bTH Header \eTH \eTR
\eTABLEhead
\bTABLEbody
\bTR \bTD hello \eTD \eTR
\bTR \bTD world \eTD \eTR
\eTABLEbody
1) I tried the following minimal example from
http://archive.contextgarden.net/message/20110109.151431.f774696a.en.html
\placetable[split]{Test}
{\bTABLE[split=yes]
\dorecurse{60}{
\bTR \bTD hello \eTD \eTR
}
\eTABLE}
with the current context versions which works fine.
I have to
Hi,
1) how can I auto-stretch a natural table to a defined width? The default seems
to be the line width, which I don't want. Setting width=... will change the per
column width, which I don't like either. I'd like to set the per table width.
\bTABLE[option=stretch,width=80mm]
\bTABLEhead
\bTR
3) Consider this example:
\bTABLE[option=stretch]
\setupTABLE[frame=off,offset=0pt]
\bTABLEhead
\bTR[bottomframe=on] \bTD Col1 \eTD \bTD Col2 \eTD \bTD Col3 \eTD \bTD Col4
\eTD \eTR
\eTABLEhead
\bTABLEbody
\dorecurse{5}{\bTR \bTD 1 \eTD \bTD 2 \eTD \bTD 3 \eTD \bTD this is a long
In case I don't know the text width, is there a way to get a dummy width
equal to \settowidth (latex)?
Search the list archive. Hans has posted a solution sometime back.
Thanks, I found it:
http://archive.contextgarden.net/message/20070314.120612.adab0a8b.en.html
Would make a useful core
Hi,
1) I tried the following minimal example from
http://archive.contextgarden.net/message/20110109.151431.f774696a.en.html
\placetable[split]{Test}
{\bTABLE[split=yes]
\dorecurse{60}{
\bTR \bTD hello \eTD \eTR
}
\eTABLE}
with the current context versions which works fine. However, if I insert
Maybe related:
Printing on a network printer (from a Mac through Skim) prints the first page
correctly, at the top of the second page it prints:
ERROR: invalidfont
OFFENDING COMMAND:definefont
STACK:
/Font
-dictionary~
/YYMGGN+LinBiolinumO
Hi,
this used to work before:
\setupcombinedlist[content][alternative=c]
\setupfootertexts[{should be en-dash: -- \hfill \pagenumber}]
\setupfooter[style=\ssbi] % -- comment out
\starttext
%text % -- comment in
\completecontent
\stoptext
Strange is, that the en-dash is there when either the
On Mar 26, 2011, at 12:42 , Hans Hagen wrote:
On 26-3-2011 2:16, Li Yanrui (李延瑞) wrote:
2011/3/26 Hans Hagenpra...@wxs.nl:
Hi,
I uploaded a new beta.
The protrusion does not work.
I have tested it with the example in
http://wiki.contextgarden.net/Protrusion#MkIV
fixed in next
The protrusion does not work.
Confirmed.
Also I do get a huge number of overfull lines which was not the case with beta
2011.02.25 22:03. This is strange because there is plenty of room (about 75
characters per line). Unfortunately I was unsuccessful to reproduce this with a
minimal example.
I'm using ConTeXt MKIV 2011.03.11 11:45 (I will try to upgrade first).
When I try to print the document from Mac (Skim.app) to two different
printers, I get pure junk on both of them (bold and italic fonts come
out semi-ok, but regular doesn't).
I have the same setup here and palatino
Do you have multiple versions of the TeXGyre Pagella installed? Maybe one of
them is corrupt.
I don't have it installed. It is in my TeX tree. But if mine is
corrupt, everyone's font is corrupt (or my disk is corrupt).
I have multiple versions from context alone:
Do you have Mac OS X 10.6.7?
Not yet. And for obvious reasons I'm not willing to update right now ;)
The small attached example is enough to break the printer (both
PostScript and PCL) when printing from Skim. May I ask you to try to
print this file with 10.6.7?
No problem here.
BTW:
\def\getdate
{\dosingleempty\dogetdate}
\def\dogetdate[#1]%
{\ctalua{context(modification_date(\jobname.tex, #1))}}
How would you automatically find out the filename which the macro is called
from? For instance if the file with the macro is included in a master document.
Florian
How would you automatically find out the filename which the macro is called
from? For instance if the file with the macro is included in a master
document.
\inputfilename
So, if you want the name of the file in which this macro is defined in, then
something like this should work:
Thanks, nice! I suppose the filename is also directly reachable from inside
\startluacode ... \stopluacode. How?
\start-stop luacode expands its contents. So, the following should work
(untested)
\startluacode
thisfilename = \thisfilename.tex
\stopluacode
No, that is not what I
Hi,
I'd like to ask an early question again in a different way: I need to count
every word in a document but lang-wrd.lua counts only words with 4+ letters.
So I tried to set words.threshold = 4 in context/base/lang-wrd.lua to smaller
values but this does not change anything.
I don't know
So I tried to set words.threshold = 4 in context/base/lang-wrd.lua to
smaller values but this does not change anything.
You have to regenerate the formats too, after you changed the value.
I thought I did but obviously something went wrong. Now it works...
Otherwise you could use directly
Have you tried \placepublications[criterium=all] or
\placepublications[criterium=text]?
Hi Thomas,
you gave me exactly the same hint last week. We should add criterium=cite and
criterium=text to the Wiki (Bibliography MKIV page:
http://wiki.contextgarden.net/Bibliography_mkiv).
In the
Maybe we should start a discussion in a new thread to find out:
1) why users are confused with mkiv/mkii?
2) why they my be reluctant to install the minimals?
3) how to restructure the garden to make things clearer for newcomers?
4) how do users look for information and how to optimise the garden
Hi,
how can I suppress the extra line in the header of the example on contextgarden
(http://wiki.contextgarden.net/Tabulate#Headers)? Removing header=repeat from
\setuptabulate helps but I'd like to keep header repetition.
Thanks,
Florian
how can I suppress the extra line in the header of the example
on contextgarden
(http://wiki.contextgarden.net/Tabulate#Headers)? Removing
header=repeat from \setuptabulate helps but I'd like to keep
header repetition.
Hi Florian,
wrapping it into a “\placetable”-float seems to get rid
how can I suppress the extra line in the header of the example
on contextgarden
(http://wiki.contextgarden.net/Tabulate#Headers)? Removing
header=repeat from \setuptabulate helps but I'd like to keep
header repetition.
Hi Florian,
wrapping it into a “\placetable”-float seems to get rid
sure, if you cook up the definition for the virtualization (if the encoding
is default tex it's no big deal, otherwise some extra tables are needed) ...
the symbols aren’t the problem, what’s difficult is greek because the greek
letters are taken from minion pro (the text font) and not
Hi,
I have an image file with two dots: file.xy.pdf
I can embed this file with
\externalfigure[file.xy.pdf][][width=\textwidth]
When leaving out the extension, the image is not found, e.g.:
\externalfigure[file.xy][][width=\textwidth]
For the time being, I renamed the files but it would
Hi,
I created a custom bibliography style file (bibl-mybst.tex) and like to use it
with
\setuppublications[alternative=mystyle]
For obvious reasons I want to move the file from texmf-context/tex/context/bib
to some directory in texmf-local. Unfortunately, the file is not found in the
Hi,
I created a custom bibliography style file (bibl-mybst.tex) and like to use
it with
\setuppublications[alternative=mystyle]
There is a mismatch in names: bibl-mybst.tex vs alternative=mystyle. Either
the file should be called bibl-mystyle.tex or use alternative=mybst.
Thanks
This is strange: When I setup a list with
\setuppublications[alternative=apa]
I get a blank reference list.
When I use this (non existent file) line instead
\setuppublications[alternative=not-existing]
context complains about not finding bibl-not-existing but I get a reference
Try \placepublications[criterium=text]
Much obliged!
Florian
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl /
Hi,
\usemodule[s-lan-03]
\setupspellchecking[state=start,method=2]
\setupspellchecking[list=words]
\ctxlua{languages.words.tracers.showwords()}
prints a word list of words with 4+ letters. Is there a way to also include 1-,
2-, and 3-letter words?
Thanks,
Florian
I am trying to make an e-book with ConTeXt. The word e-book is used in this
e-book. ;-} Sometimes e- comes on the end of the line and book at the
beginning of the next. Is there a way to circumvent this?
I could ofcourse change all occurences with \hbox{e-book} (and the same for
e-mail,
\setbreakpoints[compound]
But isn't this supposed to do exactly the opposite of what Cecil wants
(http://wiki.contextgarden.net/Composed_words)? Also she probably wants to
keep hyphenation on hyphens for composed words in general and only disable
this for the compound e-book.
You can
Hi,
what is the preferred way to set the maximum item depth for itemization with
symbols? I can decrease the default value of 6 with \setcounter. However,
increasing to values higher than 6 results in an error: Missing number,
treated as zero.
Thanks,
Florian
a next beta will have
\definesymbol [bullet][\textormathchar{2022}] % • \bullet
\definesymbol [dash] [\textormathchar{2013}] % –
\definesymbol [star] [\textormathchar{22C6}] % ✴ \star
\definesymbol [triangle] [\textormathchar{22B3}] % ⊳ \triangleright
Hi,
what is the preferred way to set the maximum item depth for itemization with
symbols?
With MkII it was possible to increase the itemlevel with the “levels” key but
MkIV has a fixed depth which can’t be changed.
Strange, I tried \defineitemgroup[myitm][levels=11] in MKII but still I
Is the git repository git://gitorious.org/context/context.git
in sync with the minimals?
It is but it is incomplete compared to the minimals and therefore may not be
what you are looking for.
Long answer: The repository is in sync with
http://pragma-ade.nl/context/current/cont-tmf.zip (see
Is there any way to use MnSymbol in context?
It is, but somebody needs to write support for it. Both for MKII and MKIV.
The problem is, that luatex refuses to load any of the MnSymbol*.otf font files
available from CTAN with an error message. I don't know what is broken with the
fonts.
--
Florian Wobbe
Alfred Wegener Institute for Polar and Marine Research
Division of Geosciences, Section of Geophysics
Postfach 120161
27515 Bremerhaven
On Feb 20, 2011, at 20:38 , Khaled Hosny wrote:
On Sun, Feb 20, 2011 at 08:30:53PM +0100, Florian Wobbe wrote:
Is there any way to use
Hi Hans,
in symb-mis.mkiv you define most symbols with \mathematics. I don't know why
you take these symbols from the math font. Just in case the symbol does not
exist in the regular font, I would guess.
Problem is only, that you will loose most symbols when switching the math font
to
Hi, since beta 2011.02.14 23:30 the correspondence module complains that
context is too old.
Florian
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist :
fyi: you can say autocase=yes so that e.g. page becomes Page when it ends up
at the beginning of a line.
Hans, thanks for the new functionality. How would I use autocase? This does not
seem to work:
\definereferenceformat [aPage] [label=page, autocase=yes]
See \aPage[one]. \aPage[one] is
I uploaded a beta. New:
[...]
\at{(}{)}[two]
Hi Hans,
is there a way to get rid of the extra space after the opening bracket?
Florian
___
If your question is of interest to others as well, please add an entry to
Hi,
when running (MkIV) the example below I get darkred instead of blue.
What can I do to change these?
Add “contrastcolor=blue”.
http://wiki.contextgarden.net/Interaction#Link_coloring
Wolfgang
But has the bug with random coloring of links ever been resolved? (I
usually get randomly
Hi,
I get
mtxrun:12090: bad argument #1 to 'gsub' (string expected, got nil)
with texexec (mtxrun --usekpse) in current beta.
Best,
Florian
___
If your question is of interest to others as well, please add an
Hi,
\date still used to work in beta 2011.01.26 11:02 now I get only v!. What is
wrong?
\starttext
\date, \date[][year,--,mm,--,dd]
\stoptext
Thanks,
Florian
___
If your question is of interest to others as well,
\date still used to work in beta 2011.01.26 11:02 now I get only v!. What
is wrong?
\starttext
\date, \date[][year,--,mm,--,dd]
\stoptext
fixed .. side effect of cleaning up some code
Thank you! I just noticed, that all numbers in front of the pdf bookmark
entries have gone as well.
Hi,
I have a strange problem with footnotes, when interaction is turned on. When a
footnote is followed by a \section{}, the color of the first footnote number
will change from contrastcolor to color. Also the number is not a clickable
link anymore. Of cause the footnote is not on a different
Hi,
please consider the following minimal example:
\def\before{\dodoubleempty\dobefore}%
\def\dobefore[#1][#2]{before}
\starttext
\before[] after (should be: \before[]\ after without explicit \type{\ })\par
\before[]after\par
\before[][] after\par % this works
\before[][]after\par
% \one, \one[…] and \one[…][…] (no spaces between “[][]” allowed)
\def\one
{\strictdoifnextoptionalelse\doone\noone}
\def\noone{[]}
\def\doone[#1]%
{\strictdoifnextoptionalelse{\dodoone[#1]}{\nodoone[#1]}}
\def\dodoone[#1][#2]%
{[#1:#2]}
\def\nodoone[#1]%
{[#1]}
One more
\unexpanded\def\one % should make it work in footnotes
Great, that did the trick. Thanks!
Florian
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist :
Hi,
I'm trying to insert the macro \pagerange into the code from
texmf-context/tex/context/base/bibl-tra.mkiv but I'm quite lost. The macro
should make proper page ranges from the bibtex file entries (Pages = {...}).
That means remove any whitespace before and after the hyphen and double a
Hi,
please consider the following minimal example:
\def\before{\dodoubleempty\dobefore}%
\def\dobefore[#1][#2]{before}
\starttext
\before[] after (should be: \before[]\ after without explicit \type{\ })\par
\before[]after\par
\before[][] after\par % this works
\before[][]after\par
\stoptext
Hello,
I get lots of overfull \hbox with compounds because context does not hyphenate
at the hyphen:
\showframe
\starttext
averyverylongword averyverylongword averyverylongword averyverylongword
three-component\par % overfull
averyverylongword averyverylongword averyverylongword
I get lots of overfull \hbox with compounds because context does not
hyphenate at the hyphen:
\showframe
\starttext
averyverylongword averyverylongword averyverylongword averyverylongword
three-component\par % overfull
averyverylongword averyverylongword averyverylongword
How can I generate a searchable PDF with mkiv, using a non standard font
like MinionPro?
\definefontfeature [default] [default] [mode=node,script=latn,onum=yes]
\usemodule[simplefonts]
\setmainfont[minionpro]
\starttext
fi ff ffi ffl 1234567890
\stoptext
Using pdftotext, I get this:
However, it turns out that pdftotext converts to
fi ff ffi ffl 1234567890,
splitting fi ligature while leaving ff, ffi and ffl intact, which is
strange.
I did not try with Adobe Reader but the pdf is searchable with Apple
Preview and the pasted copy is still intact:
fi ff ffi ffl
Hmm, does not seem to work here. I have following setup:
\environment env_draft % -- setting \setupinterlinespace[big] here
\startproduct
%\setupinterlinespace[big] % works except for references when uncommented
\startproduct filenename
\environment env_draft
\setupinterlinespace %
thanks for pointing me into the right direction. This did not work at first
ether but it was my fault. I had \setupinterlinespace[big] before
\setupbodyfont. This will reset the interlinespace. However,
\setupinterlinespace[line=1.7em] before \setupbodyfont works.
Still,
how can I move the thinrule further up in this example? I'd like to use
\thinrule but still want the position like this:
\setupheader[text][after=\hrule]
Hi Florian,
Maybe this can help you.
\setuplayout[header=1cm,headerdistance=1cm]
Thanks, that works. I wonder if you can configure this with \setupthinrules.
\setupthinrules[before=\vskip-0.8em] does no work.
Hm, if you use:
\setupthinrules[n=1, before=\vskip-0.8em]
\setupheader[text][after=\thinrules]
it can work.
However ConTeXt advises to use \blank instead
b) Is there a possibility to use relative sizes like
\setupinterlinespace[2*big] (which does not work)?
You can write \setupinterlinespace[3].
Thanks!
Why can't I put \setupinterlinespace[3] or \setupinterlinespace[big] in the
preamble? They only take effect inside \start... \stop...
b) Is there a possibility to use relative sizes like
\setupinterlinespace[2*big] (which does not work)?
You can write \setupinterlinespace[3].
Thanks!
Why can't I put \setupinterlinespace[3] or \setupinterlinespace[big] in the
preamble? They only take effect inside \start... \stop...
Hi Florian,
can I interest you in some columnsets?
··8·
\definecolumnset[three][n=3]
\starttext
\startcolumnset[three]
\setupinterlinespace[small]
\input knuth
\column
\setupinterlinespace[medium]
\input knuth
\column
Dear Wolfgang,
3 years ago, you wrote:
[...]
\setupinteraction[state=start]
\placebookmarks[chapter]
\setupinteractionscreen[option=bookmark]
\starttext
\chapter{some chapter}
\bookmark{a title}
some text
\stoptext
The above example correctly generates bookmarks in the PDF.
I can't,
On Dec 20, 2010, at 22:32 , Hans Hagen wrote:
On 20-12-2010 5:56, Mojca Miklavec wrote:
On Sun, Dec 19, 2010 at 20:37, Florian Wobbe wrote:
Hi,
The example from http://wiki.contextgarden.net/m-database gives me an error.
! LuaTeX error ...t-beta/texmf-context/tex/context/base/m
On Dec 20, 2010, at 17:56 , Mojca Miklavec wrote:
On Sun, Dec 19, 2010 at 20:37, Florian Wobbe wrote:
Hi,
The example from http://wiki.contextgarden.net/m-database gives me an error.
! LuaTeX error ...t-beta/texmf-context/tex/context/base/m-database.lua:74:
bad argument #2 to 'lpegmatch
Hi, how can I increase the minimal spacing between sentences? \setfrenchspacing
seems to work only in a justified line:
\starttext
\setfrenchspacing{15000}
This is a short sentence. It is not followed by a big space.
Here are some justified lines which have big spaces:
\input tufte
\stoptext
Hi,
The example from http://wiki.contextgarden.net/m-database gives me an error.
! LuaTeX error ...t-beta/texmf-context/tex/context/base/m-database.lua:74: bad
argument #2 to 'lpegmatch' (string expected, got nil)
stack traceback:
[C]: in function 'lpegmatch'
On Dec 14, 2010, at 14:06 , Verhaag, G.C.H.M. wrote:
mtxrun --script fonts --list --all --pattern=*snow*
which yielded the following output:
plymouthrocksnowdusted plymouthrocksnowdusted PlymouthSnowDusted.ttf
plymouthrocksnowdustednormal plymouthrocksnowdusted
Hi,
I just stumbled over a new version (000.931) of Asana Math here:
http://openfontlibrary.org/content/asyropoulos/334/Asana-Math.otf
Both CTAN and http://minimals.contextgarden.net/current/fonts/extra/Asana-Math/
still have v000.928.
Florian
On Dec 11, 2010, at 23:40 , Peter Münster wrote:
Hello,
Is there a font in the minimals with bold small caps? I've tried lm and some
tex-gyre fonts, but no success so far...
Test file:
\setupbodyfont[???]
\starttext
{\sc\bf Test} or {\bf\sc Test} should give bold small caps...
To get back to my problem:
The default Ctx bodyfont (CMR) is all right for me, I don't need to change it
(but it's possible, if it should simplify something).
If you don't need CMR, than simply don't use. It does not have greek
boldmath/upright anyway.
If I understand well, the default
On Dec 7, 2010, at 15:26 , Mojca Miklavec wrote:
I have a tiny feature request.
I would like to have a separate bibliography for, say, list of
figures. Basically all I ask for is the ability to have a separate
named bibliography as opposed to a single list.
Hi,
I would also like to
Dear typescript experts,
in an earlier Email I reported, that the font switches did not work in math
mode. E.g.,
$\bf a=\alpha$
$\bi a=\alpha$
did not display bold math. It turned out that this happens when I invoke
\definefontalternative.
Normaly \bf is defined like this:
*\show\bf
On Dec 5, 2010, at 14:58 , Procházka Lukáš wrote:
Hello,
thanks for the explanation -
On Sat, 04 Dec 2010 09:55:25 +0100, Hans Hagen pra...@wxs.nl wrote:
On 3-12-2010 5:00, Procházka Lukáš Ing. - Pontex s. r. o. wrote:
to get slanted chars, I have to call \it or \sl or \bi
On Dec 5, 2010, at 20:27 , Procházka Lukáš wrote:
Hello -
On Sun, 05 Dec 2010 18:34:34 +0100, Florian Wobbe florian.wo...@awi.de
wrote:
\definetypeface [\typescriptone] [mm] [math] [cambria] [default]
- I don't know what the meaning of individual parameters is:
\definetypeface
Hi,
this does not work in recent beta anymore:
\usemodule[fnt-10]
\starttext
\ShowCompleteFont{name:asanamath}{11pt}{1}
\stoptext
When I uncomment \endinput in fnt-10.tex I get:
! LuaTeX error ...text/tex/texmf-context/tex/context/base/cldf-com.lua:58:
attempt to call global 'format' (a nil
On Dec 1, 2010, at 22:25 , Mojca Miklavec wrote:
On Wed, Dec 1, 2010 at 22:06, Leo Razoumov wrote:
With such a fast changing codebase would it be possible to set up a
SCM repository to track ConTeXt beta development. GIT/HG/SVN would do
it. With revision control one can at least roll back
On Nov 29, 2010, at 00:29 , ... wrote:
Good evening!
First of all, I'm new to this list and also a context/luatex newbe. I have
some experience with LaTeX.
I want to use a font (Neutraface2) in my documents and I'm struggeling with
the typescript. I'm not able to get bold SmallCaps
On Nov 29, 2010, at 12:40 , Ch. B. wrote:
Am Montag, 29. November 2010, um 09:17:10 schrieb Florian Wobbe:
On Nov 29, 2010, at 00:29 , ... wrote:
Good evening!
First of all, I'm new to this list and also a context/luatex newbe. I
have some experience with LaTeX.
I want to use a font
On Nov 22, 2010, at 16:01 , Mojca Miklavec wrote:
[...]
2) Negative axis labels are set with hyphen instead of proper minus sign,
which should be longer (see example above).
I'm not sure if this should really be fixed automatically or not. In
order to fix this one would have to patch
On Nov 22, 2010, at 22:03 , Mojca Miklavec wrote:
On Mon, Nov 22, 2010 at 20:15, Florian Wobbe wrote:
Especially for line drawings it would be beneficial not to place every
single point. Instead consecutive points should be skipped if they are close
to each other (with regard to plot
On Nov 12, 2010, at 19:38 , Reviczky, Adam wrote:
Hi,
I've made a MetaPost version for creating Gantt charts.
Florian: The label alignments are fixed in this module. Further, it should be
trivial to place the names into the ganttbars, for both versions.
Thanks! Yes you are right,
On Nov 17, 2010, at 11:47 , Mojca Miklavec wrote:
[...]
Here is a brief list of changes to the gnuplot CVS version:
* support for ConTeXt and plain TeX
Hurray! Thanks a lot.
* removed dependencies for LaTeX packages other than TikZ
* needs TikZ Version = 2.0
* better support for
On Nov 17, 2010, at 12:31 , Steffen Wolfrum wrote:
Am 17.11.2010 um 10:34 schrieb Taco Hoekwater:
On 11/16/2010 12:59 PM, Steffen Wolfrum wrote:
Hi,
the current MkIV (ConTeXt ver: 2010.11.12) seems to have problems
with start/stopitemize and start/stopcolumns:
mostly it hangs
1 - 100 of 127 matches
Mail list logo