e note (thus
> > preserving the pagination of the physically printed book). But there's
> > no sense in going further if the consensus is that I'm barking up the
> > wrong tree! Here is the sample:
> >
> > \setupexternalfigures[location={local,global,default
x27;s
no sense in going further if the consensus is that I'm barking up the
wrong tree! Here is the sample:
\setupexternalfigures[location={local,global,default}]
\setupinteraction
[state=start]
\setupinteractionscreen
[option=bookmark]
\setupbackend[format=pdf/ua-2]% needs to c
that I'm barking up the wrong tree! Here is the sample:
\setupexternalfigures[location={local,global,default}]
\setupinteraction
[state=start]
\setupinteractionscreen
[option=bookmark]
\setupbackend[format=pdf/ua-2]% needs to come before:
\setuptagging[state=start]%otherwi
e trouble.
>
>
>
> The other thing is: If you don’t want to place the part title manually,
> you can actually show the part title with \setuphead[part][placehead=yes]
>
>
>
> %%%
>
>
>
> \setupinteraction
>
> [st
this up), but in this default example I would like them also to
>> shift up one decimal place: 1.1., not 1.1.1, and so on. I'm guessing
>> there's an option in \part that I should be invoking, but I don't
>> immediately see what that is (there doesn't seem
=start]
\setupinteractionscreen
[option=bookmark]
\placebookmarks[part,chapter,section]
\setuphead[part][number=no]
\starttext
\part[title=Introduction,bookmark=Introduction,number=off] % number=off does
not work
INTRODUCTION
\part[title=PART II,bookmark=Part II,number=no
e doesn't seem to be a
> \startpart...\stoppart to allow the relatively straightforward
> customization that we get with chapters and sections). Here is the example:
>
>
>
> \setupinteraction
>
> [state=start]
>
>
>
> \setupinteractionscreen
>
> [option=
ere is the example:
\setupinteraction
[state=start]
\setupinteractionscreen
[option=bookmark]
\placebookmarks[part,chapter,section]
\starttext
\part[title=Introduction,bookmark=Introduction,number=off]
\noheaderandfooterlines
INTRODUCTION
\page
\noheaderandfoote
an option in \part that I should be
invoking, but I don't immediately see what that is (there doesn't seem to be a
\startpart...\stoppart to allow the relatively straightforward customization
that we get with chapters and sections). Here is the example:
\setupinteraction
[state
ation that we get with chapters and sections). Here is the example:
\setupinteraction
[state=start]
\setupinteractionscreen
[option=bookmark]
\placebookmarks[part,chapter,section]
\starttext
\part[title=Introduction,bookmark=Introduction,number=off]
\noheaderandfoo
On 3/4/2025 6:49 PM, Pablo Rodriguez via ntg-context wrote:
Dear list,
I create booklets with the following source:
\setuppapersize[A5, landscape][A4]
\setuparranging[2UP]
\setuplayout[page]
\setuppagenumbering[alternative=doublesided]
\setupinteractionscreen[option
Dear list,
I create booklets with the following source:
\setuppapersize[A5, landscape][A4]
\setuparranging[2UP]
\setuplayout[page]
\setuppagenumbering[alternative=doublesided]
\setupinteractionscreen[option={landscape,paper}]
\starttext
\def\Doc{xml-mkiv.pdf
ext
> a\footnote{b}
> \stoptext
>
> If page is set to anything different than no in \setupinteractionscreen,
> focus=standard will not work (it will be used as focus=fit).
>
> Could anyone confirm the issue or explain me what I’m doing wrong?
>
> Many than
Dear list,
sorry for insisting, but this is important for my documents.
I have the following sample:
\setupinteraction[state=start, page=name, focus=standard]
\starttext
a\footnote{b}
\stoptext
If page is set to anything different than no in \setupinteractionscreen,
focus=standard will
Hans Hagen schrieb am 02.09.2023 um 11:53:
On 9/2/2023 11:45 AM, Wolfgang Schuster wrote:
Pablo Rodriguez schrieb am 02.09.2023 um 10:25:
Dear list,
I have the following sample (using current latest from 2023.08.27
13:48):
\setupinteractionscreen[option=max]
\definefontfamily[maf][rm
On 9/2/2023 11:45 AM, Wolfgang Schuster wrote:
Pablo Rodriguez schrieb am 02.09.2023 um 10:25:
Dear list,
I have the following sample (using current latest from 2023.08.27 13:48):
\setupinteractionscreen[option=max]
\definefontfamily[maf][rm][DejaVu Sans]
[sl={style:tf, features
Pablo Rodriguez schrieb am 02.09.2023 um 10:25:
Dear list,
I have the following sample (using current latest from 2023.08.27 13:48):
\setupinteractionscreen[option=max]
\definefontfamily[maf][rm][DejaVu Sans]
[sl={style:tf, features:{default,slanted}}]
\setupbodyfont[maf, 8pt
Dear list,
I have the following sample (using current latest from 2023.08.27 13:48):
\setupinteractionscreen[option=max]
\definefontfamily[maf][rm][DejaVu Sans]
[sl={style:tf, features:{default,slanted}}]
\setupbodyfont[maf, 8pt]
\setupfittingpage[offset=1ex]
\starttext
> correct this manually (for instance in French « connaître » was typed
> as « conn\^{\i}tre »).
Hi Otared
I think what doesn’t work is the dotless i as combining character for i
+ diacritical mark.
It seems that standard i may combine fine:
\setupinteractionscreen[option=max]
\starttext
On 3/2/23 00:20, Hans Hagen wrote:
> On 2/28/2023 6:23 PM, Pablo Rodriguez via ntg-context wrote:
>> [...]
> I only see one size. Anyway, attached a fix for the different rounding.
Sorry, Hans, I copied the wrong sample (value for "width" in
"\setupinteractionscreen&qu
On 2/28/2023 6:23 PM, Pablo Rodriguez via ntg-context wrote:
Dear list,
I have the following source:
\nopdfcompression
\setupinteractionscreen
[width=max]
\setuplayout
[standard]
[backspace=.7\textwidth,
cutspace=\cutspace,
width=middle]
\starttext
Dear list,
I have the following source:
\nopdfcompression
\setupinteractionscreen
[width=max]
\setuplayout
[standard]
[backspace=.7\textwidth,
cutspace=\cutspace,
width=middle]
\starttext
\startmakeup[page]
\null
\stopmakeup
\startmakeup[standard]
\null
ethod=traditional]%
\sethyphenationfeatures[underscore]%
\setuplanguage
[explicitrighthyphenchar=-1]
\setupinteractionscreen[option=singlesided]
\starttext
\doloopoverlist
{es,en,uk,de,nl,pt,fr,it,deo,da,sv,af,no,nb,pl,cs,sk,hr,sl,fi,et,hu}
{\mainlanguage[\recursestring]
\startTEXpage
onfeatures
[underscore]
[righthyphenchar="FE000]
\setuphyphenation[method=traditional]%
\sethyphenationfeatures[underscore]%
\setuplanguage
[explicitrighthyphenchar=-1]
\setupinteractionscreen[option=singlesided]
\starttext
\doloopoverlist
{es,en,uk,de,nl,
.ntg.nl/pipermail/ntg-context/2022/106829.html by Hans
himself).
The following code relates to an issue I had with ConTeXt myself:
\setuppapersize[A5][A4, landscape]
\doifmodeelse{broken-printer}
{\setuparranging[2UP,doublesided]
\setupinteractionscreen[option={portrait, pape
fine \shabufferfile to avoid \savebuffer (only
> required to get the hash).
The SHA calculation isn't working properly because of a weird newline
issue. Try this:
\setupinteraction[state=start]
\setupinteractionscreen[option={attachment}]
\startbuffer[test]
just a te
Dear list,
playing with buffer contents, I have the following file:
\setupinteraction[state=start]
\setupinteractionscreen[option={attachment}]
\startbuffer[test]
just a test
and another one
\stopbuffer
\starttext
\ctxlua{require("util-sha")}
\def\s
paper size gets
reduced if I use cropoffset as well as \setupinteractionscreen.
(It is known that the PDF box settings only work with the latter.)
In the MWE below, paper size gets reduced by cropoffset:
\setuppapersize[A4]
\setuplayout[
cropoffset=10mm,
]
\setupinteractionscreen[
width
Hi, at least in the current and previous LMTX beta, the paper size gets
reduced if I use cropoffset as well as \setupinteractionscreen.
(It is known that the PDF box settings only work with the latter.)
In the MWE below, paper size gets reduced by cropoffset:
\setuppapersize[A4]
\setuplayout
get repeated (not what I expected).
Here is a M(not)WD:
###begin
\setupinteraction[state=start]
\placebookmarks[chapter, section][chapter, section]
\setupinteractionscreen[option=bookmark]
\starttext
\startfrontmatter
\title{Contents}
\placelist[chapter]
\stopfrontmatter
\stopbuffer
\startmode[*first]
\savebuffer[newbuff][A3page.tex, prefix=no]
\executesystemcommand{context --purgeall A3page.tex}
\stopmode
\showframe
\setuplayout[page]
\setuppapersize[A5][A4, landscape]
\setuparranging [2UP]
\setupinteractionscreen[option={landscape, paper
]
\executesystemcommand{context --purgeall A3page.tex}
\stopmode
\showframe
\setuplayout[page]
\setuppapersize[A5][A4, landscape]
\setuparranging [2UP]
\setupinteractionscreen[option={landscape, paper}]
\starttext
\doiffile{A3page.pdf}
{\def\Doc{A3page.pdf}
\getfiguredimensions[\Doc
is is
misleading in Acrobat Reader & Pro, where the TrimBox is shown in green (if
this option is activated)!
Bleed is to be defined in \setuplayout:
\showframe
\setuppapersize[A4][A4,oversized]
\setuplayout[
location=middle,
bleedoffset=-5mm,
marking=on,
]
%\setupinteractionscreen[width=m
the TrimBox is shown in green (if
this option is activated)!
Bleed is to be defined in \setuplayout:
\showframe
\setuppapersize[A4][A4,oversized]
\setuplayout[
location=middle,
bleedoffset=-5mm,
marking=on,
]
%\setupinteractionscreen[width=max,height=max]
\starttext
X
\stoptext
Status
On 8/4/21 8:52 PM, Wolfgang Schuster via ntg-context wrote:
> Pablo Rodriguez via ntg-context schrieb am 04.08.2021 um 15:53:
>> [...]
>> I’m afraid that "copies" isn’t generating the proper /NumCopies entry in
>> the /ViewerPreferences dictionary.
>>
>> Could anyone be so kind to confirm this?
>
>
Pablo Rodriguez via ntg-context schrieb am 04.08.2021 um 15:53:
Dear list,
I have the following sample:
\setupinteractionscreen[copies=5]
\starttext
\dorecurse{5}{\input zapf\par}
\stoptext
The resulting file from current latest (2021.07.30 00:57) contains the
following
Dear list,
I have the following sample:
\setupinteractionscreen[copies=5]
\starttext
\dorecurse{5}{\input zapf\par}
\stoptext
The resulting file from current latest (2021.07.30 00:57) contains the
following /ViewerPreferences dictionary:
/ViewerPreferences <<
/Duplex /S
PDF/A
<https://wiki.contextgarden.net/PDF/A>:
---
\setupinteraction[title=MyTitle,state=start]
\setupinteractionscreen[option={title}]
\setupbackend[
format={pdf/a-1a:2005},
profile={default_cmyk.icc,default_rgb.icc,default_gray.icc},
intent=ISO coated v2 300\letterpercent\spac
F/A>:
---
\setupinteraction[title=MyTitle,state=start]
\setupinteractionscreen[option={title}]
\setupbackend[
format={pdf/a-1a:2005},
profile={default_cmyk.icc,default_rgb.icc,default_gray.icc},
intent=ISO coated v2 300\letterpercent\space (ECI)]
%% Tagged PDF
%% method=auto ==> defaul
tps://www.w3.org/TR/WCAG20-TECHS/PDF18.html>.
Does this work at your end?
\setupinteraction
[title=MyTitle,state=start]
\setupinteractionscreen
[option={title}]
\starttext
test
\stoptext
2. "Tagged Annotations" fails, suggesting that the document’s links are
not pr
On 7/6/21 7:44 PM, Ajith R wrote:
> Hi Pablo,
>
> Just to be sure that you have the correct ligature, will you please
> share a picture or pdf of the rendered text?
Hi Ajith,
sure, the output from the following source:
\setupinteraction[state=start]
\setupinteractionscree
[mainface]
> [rm]
> [TeX Gyre Pagella]
>
> \setupbodyfont
> [mainface]
>
> \starttext
> \agr\input aristotle-grc
>
> \de\input aesop-de
> \stoptext
>
> Sorry, but unless you provide a minimal sample, it isn’t easy to guess
>
agella]
\setupbodyfont
[mainface]
\starttext
\agr\input aristotle-grc
\de\input aesop-de
\stoptext
Sorry, but unless you provide a minimal sample, it isn’t easy to guess
what you might have in mind.
I’m afraid that I’m not sure whether the following sample contains your
“arbitrary styles”
Dear list,
I have the following sample:
\setuppapersize[A4, landscape]
\setupinteractionscreen[option={landscape, paper}]
\starttext
\dorecurse{2}
{\startmakeup[page][pagestate=start, align=middle]
\dontleavehmode
\scale[width=.8\textwidth]{middle}
\stopmakeup}
\stoptext
On 2/9/21 7:30 PM, Hans Hagen wrote:
> On 2/9/2021 7:15 PM, Pablo Rodriguez wrote:
>> [...]
>> Sorry, Hans, the original sample was different, but I removed the offset
>> option in order to make it smaller:
>>
>>\setupinteractionscreen[option=max]
>>
want is
\startpagemakeup
\stoppagemakeup
Sorry, Hans, the original sample was different, but I removed the offset
option in order to make it smaller:
\setupinteractionscreen[option=max]
\starttext
\startTEXpage[offset=1em]
\ConTeXt
\stopTEXpage
\stoptext
I hope it is cleare
what you want is
>
> \startpagemakeup
>
> \stoppagemakeup
Sorry, Hans, the original sample was different, but I removed the offset
option in order to make it smaller:
\setupinteractionscreen[option=max]
\starttext
\startTEXpage[offset=1em]
\ConTeXt
\stopTEXpage
\stoptext
I hop
Dear list,
I have the following sample:
\setupinteractionscreen[option=max]
\starttext
\startTEXpage
\null
\stopTEXpage
\stoptext
LMTX doesn’t include full page. MkIV compiles it fine.
If I remove the TEXpage, LMTX includes the full page mode.
I’m using latest version from
Dear list,
I have already reported this before
(https://mailman.ntg.nl/pipermail/ntg-context/2020/099636.html).
I have the following sample:
\setupinteractionscreen
[width=fit]
\starttext
\null
\stoptext
Mediabox is fine:
[ 0 0 595.2756 841.8898 ]
But cropbox and trimbox
uture, here is an MWE
adapted from one of the test cases that places one bookmark via a chapter
heading and one manually that is not linked to any document section.
\enabletrackers[references.bookmarks,backend.resources] % For debug only
\setupinteraction
[state=start]
\setupinteractionscreen
t I was able to add the following to my document setup:
\definehead [Bookmark] [title]
[ placehead=empty,
before={},
after={},
]
\setupinteraction[state=start]
\setupinteractionscreen[option=bookmark]
\placebookmarks[chapter,heading,Bookmark][chapter][force=yes]
And then in th
I think (Wolfgang may correct
me [or explain this better]).
Expansion in list and bookmarks seems to be different:
\setupinteraction[state=start]
\setupinteractionscreen[option=bookmarks]
\placebookmarks[section][section]
\setuphead[title][page=no]
\starttext
%~ \
Dear list,
I have the following sample:
\setupinteractionscreen
[width=fit]
\starttext
\null
\stoptext
The first command adds cropbox and trimbox different from the media box.
See PDF code:
5 0 obj
[ 0 0 595.2756 841.8898 ]
endobj
6 0 obj
<<
/CropBox
=red]
> \setupexternalfigures[interaction=all, method=pdf]
> \setupinteractionscreen[option={portrait, paper}]
> \starttext
> %~ \insertpages[http://gaceta.rsme.es/abrir.php?id=1495][width=0pt]
> \insertpages[GacRSocMatEsp.pdf][width=0pt]
> \stoptext
>
> I have some issues with i
bledirectives[references.border=red]
> \setupexternalfigures[interaction=all, method=pdf]
> \setupinteractionscreen[option={portrait, paper}]
> \starttext
> %~ \insertpages[http://gaceta.rsme.es/abrir.php?id=1495][width=0pt]
> \insertpages[GacRSocMatEsp.pdf][width=0pt]
> \stoptext
>
>
Dear list,
I have the following sample:
\setuplayout[page]
\setupinteraction
[state=start, color=, contrastcolor=, focus=standard]
\enabledirectives[references.border=red]
\setupexternalfigures[interaction=all, method=pdf]
\setupinteractionscreen[option={portrait, paper
artnotmode[*first]
\setuppapersize[A5, landscape][A4]
\setuparranging[2TOPSIDE]
\setuplayout[page]
\setupinteractionscreen[option={portrait,paper}]
\starttext
\insertpages[\jobname-singular.pdf][width=0pt]
\stopnotmode
\stoptext
I would say that last page (
\currentinteractionscreendelay\v!none
\zerocount\else\currentinteractionscreendelay\fi
\relax
\endgroup}
I wonder whether the "delay" option in \setupinteractionscreen defines
the number of seconds for the page or for the transition.
From what I read in the code above, I would sa
ebian ConTeXt
> (version 2020.03.10.20200331-1). Please let me know if I am missing
> something.
Hi Kumar,
this sample works with both Acrobat for Linux and Evince (using LMTX
latest):
\setuppapersize[A9,landscape]
\setupinteraction[state=start]
\setupinteractionscreen[option=max]
I need to create my own links somehow?
>>
>> Example:
>>
>> \setupinteraction[state=start]
>> \setupinteractionscreen[option=bookmark]
>>
>> \define[3]\SectionListEntry
>> {\par \leftaligned\bgroup
>> \hbox to 2em{#3}%
>>
Bruce Horrocks schrieb am 16.05.2020 um 00:47:
When I customise the table of contents layout I lose the automatic hyperlinks.
Is there a simple configuration option that I have missed or do I need to
create my own links somehow?
Example:
\setupinteraction[state=start]
\setupinteractionscreen
etupinteraction[state=start]
> \setupinteractionscreen[option=bookmark]
>
> \define[3]\SectionListEntry
> {\par \leftaligned\bgroup
> \hbox to 2em{#3}%
> \hskip 1em
> \vtop{\hsize\dimexpr\textwidth-3em\relax#2}
> \egroup \par}
>
> % Comment o
When I customise the table of contents layout I lose the automatic hyperlinks.
Is there a simple configuration option that I have missed or do I need to
create my own links somehow?
Example:
\setupinteraction[state=start]
\setupinteractionscreen[option=bookmark]
\define[3]\SectionListEntry
s
>
> \setuplayout
> [cropoffset=30pt,
> bleedoffset=20pt,
> trimoffset=10pt]
>
> \setupinteractionscreen
>[width=max,height=max]
>
> -
>Hans Hage
other way.
can you try this
\setuplayout
[cropoffset=30pt,
bleedoffset=20pt,
trimoffset=10pt]
\setupinteractionscreen
[width=max,height=max]
-
Hans Hagen | PRAGMA ADE
Ri
etuplayout[location=middle, marking=on]
\setupinteraction
[title={TestDoc},
author={Anon}]
\setupbackend
[format=PDF/X-1a:2003,
intent={ISO Coated v2 300\letterpercent\space (ECI)}]
\setupinteractionscreen[width=max,height=max]
\startluacode
moduledata.mystuff={}
respecify_pdf_boxes
;:', 1)
end
end
context.filterpages( { filename }, { right_range },
{ width = Opt } )
end
\stopluacode
\def\filterfrompagerange[#1]{%
\ctxlua{document.printrange_from_file("#1")}}
\setuplayout[page]
\setupinteractionscreen[option={po
]
\setupinteractionscreen[option=attachment]
\starttext
a\attachment[file=xml-mkiv.pdf, name={attached.pdf}]
\stoptext
This happens with latest beta (from 2019.12.17) in both MkIV and MkXL.
https://www.pdfa.org/wp-content/uploads/2018/10/PDF20_AN002-AF.pdf#search=usability
warns about the use
On 12/18/2019 11:32, Pablo Rodriguez wrote:
Hi Hans,
I accidentally discovered that file attachment generates two entries in
Acrobat, such as this sample:
\setuppapersize[A5]
\showframe
\setupinteraction[state=start]
\setupinteractionscreen[option=attachment
Hi Hans,
I accidentally discovered that file attachment generates two entries in
Acrobat, such as this sample:
\setuppapersize[A5]
\showframe
\setupinteraction[state=start]
\setupinteractionscreen[option=attachment]
\starttext
a\attachment[file=xml-mkiv.pdf, name
ument
(using latest beta from 2019.12.12 13:15).
\setuppapersize[A5]
\showframe
\setupinteraction[state=start]
\setupinteractionscreen[option=attachment]
\starttext
a\attachment[file=xml-mkiv.pdf]
\stoptext
BTW, if I try to compile this with MkIV beta from 2019.12.12 13
Hi Hans,
I have the following sample, using latest beta from 2019.11.14 17:07:
\setuppapersize[A5]
\showframe
\setupinteraction[state=start]
\setupinteractionscreen[option=attachment]
\starttext
a\attachment[file=xml-mkiv.pdf]
b\attachment[file=mkiv
ere you have a minimal sample:
\setupinteractionscreen[option=layer]
\defineviewerlayer[blue]
\starttext
\startviewerlayer[blue]
%~ Previous comment.
\color[blue]{\llap{This is print.}}
\stopviewerlayer
\stoptext
Uncommenting the first line maker everything ok.
Co
e
> reasonable value (1/10s).
>
>
> Regards, Peter
>
>
> Am 06.10.2019 um 21:13 schrieb Pablo Rodriguez:
>> Dear list,
>>
>> I have this minimal sample:
>>
>> \setupinteraction[state=start]
>> \setupinteractionscreen[option=max]
>>
Regards, Peter
Am 06.10.2019 um 21:13 schrieb Pablo Rodriguez:
> Dear list,
>
> I have this minimal sample:
>
> \setupinteraction[state=start]
> \setupinteractionscreen[option=max]
> \startJSpreamble {varia} used now
> var transitions = [1000,
> 2000,
space=2cm]
\definepapersize[nice][width=180mm,height=250mm]
\setuppapersize[nice][nice]
\setupinteraction[state=start]
\placebookmarks[chapter,section,subsection][chapter,section,subsection]
\setupinteractionscreen[option=bookmark]
\setupindenting[medium,yes]
\definestructureconversi
=2cm]
\definepapersize[nice][width=180mm,height=250mm]
\setuppapersize[nice][nice]
\setupinteraction[state=start]
\placebookmarks[chapter,section,subsection][chapter,section,subsection]
\setupinteractionscreen[option=bookmark]
\setupindenting[medium,yes]
\definestructureconversionset
Dear list,
I have this minimal sample:
\setupinteraction[state=start]
\setupinteractionscreen[option=max]
\startJSpreamble {varia} used now
var transitions = [1000,
2000,
3000,
4000,
5000,
6000,
7000,
8000,
9000];
var msecs = 0;
function
On 7/29/2019 9:33 PM, Pablo Rodriguez wrote:
Hi Hans,
I have the following sample:
\showframe\showgrid
\setupinteraction[state=start]
\setupinteractionscreen[option=attachment]
\setupattachment[location=inmargin]
\starttext
a\attachment[file=xml-mkiv.pdf]
b
Hi Hans,
I have the following sample:
\showframe\showgrid
\setupinteraction[state=start]
\setupinteractionscreen[option=attachment]
\setupattachment[location=inmargin]
\starttext
a\attachment[file=xml-mkiv.pdf]
b\footnote{\attachment[file=i-context.pdf]}
\stoptext
rotation, maybe there is a better
> solution for this?
I want to avoid enabling auto rotate in the screens where these
documents are viewed.
In any case, as long as I use "\setupinteractionscreen[option={none,
max}]", everything works as expected.
May thank
Pablo Rodriguez schrieb am 14.05.2019 um 21:39:
On 5/14/19 8:05 PM, Wolfgang Schuster wrote:
Pablo Rodriguez schrieb am 14.05.2019 um 18:51:
[...]
I think it might be a bug.
When you add \setupinteractionscreen to your document ConTeXt uses a
more complex method to save the page size which
On 5/14/19 8:05 PM, Wolfgang Schuster wrote:
> Pablo Rodriguez schrieb am 14.05.2019 um 18:51:
>> [...]
>> I think it might be a bug.
>
> When you add \setupinteractionscreen to your document ConTeXt uses a
> more complex method to save the page size which includes calculat
Wolfgang’s help):
\setuppapersize [A4,landscape,90] [A4]
\setupinteractionscreen[option={none, max}]
\showframe
\starttext
\showlayout
\stoptext
If I set "option=max" (instead of "option={none, max}", I get a square
paper of 210x210mm.
These are the r
,90] [A4]
\setupinteractionscreen[option={none, max}]
\showframe
\starttext
\showlayout
\stoptext
If I set "option=max" (instead of "option={none, max}", I get a square
paper of 210x210mm.
These are the right page dimensions in PDF with the sample ab
On 5/14/19 5:16 PM, Wolfgang Schuster wrote:
> Pablo Rodriguez schrieb am 14.05.2019 um 16:12:
>> Dear list,
>>
>> I have the following sample:
>>
>> \setuppapersize[A4, landscape][A4, 90]
>> %~ \setupinteractionscreen[option=max]
>> \sho
Pablo Rodriguez schrieb am 14.05.2019 um 16:12:
Dear list,
I have the following sample:
\setuppapersize[A4, landscape][A4, 90]
%~ \setupinteractionscreen[option=max]
\showframe
\starttext
\showlayout
\stoptext
For some reason, the page is displaced from the paper
On 5/14/2019 4:12 PM, Pablo Rodriguez wrote:
Dear list,
I have the following sample:
\setuppapersize[A4, landscape][A4, 90]
%~ \setupinteractionscreen[option=max]
\showframe
\starttext
\showlayout
\stoptext
For some reason, the page is displaced from the paper
Dear list,
I have the following sample:
\setuppapersize[A4, landscape][A4, 90]
%~ \setupinteractionscreen[option=max]
\showframe
\starttext
\showlayout
\stoptext
For some reason, the page is displaced from the paper bottom. And if
fullscreen is set, the real paper size
>> ConTeXt upgrade to create a \setupinteractionscreen[option=nomenubar] switch.
>> I wonder if it would be possible to add this little feature to the source
>> code. Perhaps it can be useful to others as well.
>> Greetings!
>> Paul
>> Attachment: patch + modified lpdf-mis.lu
On 4/28/2019 5:25 PM, Alan Braslau wrote:
On 28Apr19, at 04:27, Hans Hagen wrote:
\setupinteractionscreen[option=nomenubar] switch.
I wonder if it would be possible to add this little feature to the source code.
Why don’t you simply put this setup in your local environment (texmf-local
> On 28Apr19, at 04:27, Hans Hagen wrote:
>
>> \setupinteractionscreen[option=nomenubar] switch.
>> I wonder if it would be possible to add this little feature to the source
>> code.
Why don’t you simply put this setup in your local environment (texmf-local) as
On 4/27/2019 6:07 PM, Paul Schalck wrote:
Hi,
I use the "Hide menu bar" option extensively in Adobe Acrobat Reader to get a
cleaner interface. To this end, I usually hack lpdf-mis.lua after a ConTeXt upgrade to
create a \setupinteractionscreen[option=nomenubar] switch.
I wonder i
Hi,
I use the "Hide menu bar" option extensively in Adobe Acrobat Reader to get a
cleaner interface. To this end, I usually hack lpdf-mis.lua after a ConTeXt
upgrade to create a \setupinteractionscreen[option=nomenubar] switch.
I wonder if it would be possible to add this little feat
Dear list,
I have the following sample:
\setupinteraction[state=start]
\setupinteractionscreen[option=attachment]
\setuppapersize[A9, landscape]
\starttext
\footnote{attachment\attachment
[xml-mkiv.pdf]
[location=inmargin]}
\stoptext
Using latest beta
Dear list,
I have the following sample:
\setupinteraction[state=start]
\setupinteractionscreen[option=attachment]
\starttext
\attachment
[https://eur-lex.europa.eu/legal-content/ES/TXT/PDF/?uri=CELEX:12016E/TXT]
[name=TFUE.pdf]
\stoptext
Is there a way that curl may
]
\setupinteraction[state=start]
\setupinteractionscreen[option={portrait, paper}, print=pages]
\starttext
\getfiguredimensions[i-context.pdf]
\dostepwiserecurse{1}{99}{1}{\externalfigure[i-context.pdf][height=\textheight,page=\recurselevel]}
\startmarkpages[page]
\dostepwiserecurse{100}{300}{1
pinteraction[state=start]
> \setupinteractionscreen[option={portrait, paper}, print=pages]
> \starttext
> \getfiguredimensions[i-context.pdf]
> \dostepwiserecurse{1}{99}{1}{\externalfigure[i-context.pdf][height=\textheight,page=\recurselevel]}
> \startmarkpages[page]
> \dostep
[state=start]
\setupinteractionscreen[option={portrait, paper}, print=pages]
\markpage[pages][100-300]
\starttext
\insertpages[i-context.pdf][width=0pt]
\stoptext
Many thanks for your help,
Pablo
Wolfgang Schuster <mailto:schuster.wolfg...@gmail.com>
18. Juli 2018 um 19:40
Pablo Rodrigue
t[page]
\setupinteraction[state=start]
\setupinteractionscreen[option={portrait, paper}, print=pages]
\markpage[pages][100-300]
\starttext
\insertpages[i-context.pdf][width=0pt]
\stoptext
\startmarkpages[page]
...
\stopmarkpages
Wo
1 - 100 of 346 matches
Mail list logo
