On 4/26/2024 9:54 AM, Thomas A. Schmitz wrote:
On 4/26/24 9:30 AM, Thomas A. Schmitz wrote:
And here I am again! Both in mkiv and in mkxl, start/stopregister does
not work when there is already an index entry before. Example below!
All best
Thomas
\setuppapersize [A6]
\starttext
On 4/26/24 9:30 AM, Thomas A. Schmitz wrote:
And here I am again! Both in mkiv and in mkxl, start/stopregister does
not work when there is already an index entry before. Example below!
All best
Thomas
\setuppapersize [A6]
\starttext
A\index{A} B \page
A\startregister [index] {A} B
there is already an index entry before. Example below!
All best
Thomas
\setuppapersize [A6]
\starttext
A\index{A} B \page
A\startregister [index] {A} B\startregister [index] [B] {B}
\dorecurse {10} {\input tufte}
A\stopregister [index] {A} B\stopregister [index] [B]
\page
but not in mkxl.
All best
Thomas
\setuppapersize [A6]
\starttext
A\index{A} B\startregister [index] [B] {B}
\dorecurse {10} {\input tufte}
A\index{A} B\stopregister [index] [B]
\page
\placeregister[index]
\stoptext
I’m using it like
\startregister[index][bibliografie]{Bibliografie
Hi all,
has \startregister been superseded in luametatex or is it not yet
implemented? I tried to read strc-reg.lmt but couldn't figure out what
is going on. The following silly minimal test produces the expected
result with mkiv but not in mkxl.
All best
Thomas
\setuppapersize [A6
Dear Pablo,
Here is my example:
\setuppapersize[A4]
\setupbodyfont[termes, 12.50pt]
\setuplayout[backspace=2.9cm,
width=fit]
\ininnermargin{\blackrule[color=black, height=0.10ex, width=1cm]\\{3.2.2}}
\dontleavehmode \blackrule[color=black, height=0.10ex, width=13.50cm]
\showframe
Ursula Hermann schrieb am 22.03.2024 um 15:57:
Dear Pablo,
Many thanks for your example. Sorry for writing so late.
At least I found out, how it works for me . This is the best way.
\setuppapersize[A8,landscape]
\setupbodyfont[termes, 12.50pt]
\setuplayout[inrightmargin=5.1cm
Dear Pablo,
Many thanks for your example. Sorry for writing so late.
At least I found out, how it works for me . This is the best way.
\setuppapersize[A8,landscape]
\setupbodyfont[termes, 12.50pt]
\setuplayout[inrightmargin=5.1cm
backspace=2.9cm,
inleftmargin=0cm
{numberofpages}{\getdocumentargument{numberofpages}}{16}}
\setuppapersize[A9,landscape][A7,landscape]
\setuparranging[\Schema]
\setupbodyfont[ss,10pt]
\setuplayout[margin=0pt, width=fit, header=2.8ex, footer=2.8ex]
\setupalign[middle,hilo]
\setuppagenumbering [alternative=doublesided,location
ext (mandatory to
avoid stupid errors).
> \definepapersize[MyBook][width=19cm,height=29.7cm]
> \setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook
> %\setuppapersize[MyBook][A4] %Would print MyBook-size pages on A4 paper
> \setupbodyfont[modern, 12.50pt]
If these lines
Dear List,
On the first page I had this example:
\definepapersize[MyBook][width=19cm,height=29.7cm]
\setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook
%\setuppapersize[MyBook][A4] %Would print MyBook-size pages on A4 paper
\setupbodyfont[modern, 12.50pt]
\definemargindata
of
> numeric values.
>
> The value of paperSize is later passed on to \setuppapersize via
> \setuppapersize[\directlua{tex.print(paperSize)}]
>
> Emanuel
> On März 13 2024, at 3:55 pm, Otared Kavian wrote:
> Hi Emmanuel,
>
> Thank you so much for the new s
ric values.
The value of paperSize is later passed on to \setuppapersize via
\setuppapersize[\directlua{tex.print(paperSize)}]
Emanuel
On März 13 2024, at 3:55 pm, Otared Kavian wrote:
> Hi Emmanuel,
>
> Thank you so much for the new setup for writing Japanese: I tested with both
&
fined « by hand » there, instead of being retrieved from the command
\setuppapersize[B5]
issued by the user?
Actually I am using your setup for learning Japanese, and at my beginner’s
level I do separate words I am learning with spaces. While with the previous
version of your setup the
Mitunter. . I think it should be the topoffset, and the bottomoffset, but how
> many .\bodyfontsize should I try?
> Many thanks
> Uschi
> \mainlanguage[de]
> \definepapersize[MyBook][width=19cm,height=24cm]
> \setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook
> %\setupp
it should be the topoffset, and the bottomoffset, but how
many .\bodyfontsize should I try?
Many thanks
Uschi
\mainlanguage[de]
\definepapersize[MyBook][width=19cm,height=24cm]
\setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook
%\setuppapersize[MyBook][A4] %Would print MyBook-size
;
includes the mark in the initial, and it works only with a few
languages, e.g. English and French, but not e.g. German or Dutch:
"""
\mainlanguage[de]
\setuppapersize[A6]
\setupinitial[n=2,color=orange,]
\starttext
\start
\setupinitial[method=first]
\placeinitial \quotation{Keine andere
://wiki.contextgarden.net/Imposition
I'll read and test it.
Hi Jean-Pierre,
in its simplest form, a booklet may be:
\setuppapersize[A4][A3, landscape]
\setuparranging[2UP]
\starttext
\dorecurse{28}{\section{Section}\input zapf}
\stoptext
I think this seems to be what you may be aiming at.
Just in case
On 2/28/24 15:27, Jean-Pierre Delange wrote:
> Sorry for the noise : I did'nt see the ConTeXt imposition schemas here :
>
> https://wiki.contextgarden.net/Imposition
>
> I'll read and test it.
Hi Jean-Pierre,
in its simplest form, a booklet may be:
\setuppapersize[A4
a solution for this.
I’m afraid I cannot make your sample work:
\setuppapersize[A5][A4, landscape]
\setuparranging[2UP]
\setuppagenumbering[alternative={singlesided,doublesided}]
\starttext
\samplefile{lorem}
\page[quadruple]
page before the quadruple (must be 3, not 4)
\page[yes, quadru
/context/base/mkxl/context.mkxl
>> mtx-context | current version: 2024.01.24 22:39
>> --
>> Stripped down MWE:
>> \setuppapersize[A4] [A4]
>> \starttext
>> \completecontent[criterium=all]
>> % ToC
>> \page
>> \chapter{CHAP 1}
>>
-context | main context file:
/Applications/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkxl/context.mkxl
mtx-context | current version: 2024.01.24 22:39
--
Stripped down MWE:
\setuppapersize[A4] [A4]
\starttext
\completecontent[criterium=all]
% ToC
\page
\chapter{CHAP 1}
TEXT
/context/base/mkiv/context.mkiv
>> mtx-context | current version: 2024.01.24 22:39
>> mtx-context | main context file:
>> /Applications/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkxl/context.mkxl
>> mtx-context | current version: 2024.01.24 2
text.mkxl
> mtx-context | current version: 2024.01.24 22:39
> --
>
> Stripped down MWE:
>
> \setuppapersize[A4] [A4]
> \starttext
> \completecontent[criterium=all]
> % ToC
> \page
> \chapter{CHAP 1}
> TEXT
> \startbackmatter
>
/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkxl/context.mkxl
mtx-context | current version: 2024.01.24 22:39
--
Stripped down MWE:
\setuppapersize[A4] [A4]
\starttext
\completecontent[criterium=all]
% ToC
\page
\chapter{CHAP 1}
TEXT
\startbackmatter
\startchapter[title=Literature
e result I was looking for is the second figure
in this example.)
Thanks.
Jim
%%% cut here %%%%%
\setuppapersize[legal]
\starttext
fr[ef] with frameoffset=1cm: This preceding text ends up inside the frame.
\fr
On Tue, Jan 16, 2024 at 01:15 (+), Bruce Horrocks wrote:
> On 15 Jan 2024, at 16:15, Jim wrote:
>> I would like
>> something which automagically "does the right thing".
> Not pretty, but... :-)
> \setupwhitespace [big]
> \setuppapersize [letter]
>
On 15 Jan 2024, at 16:15, Jim wrote:
>
> I would like
> something which automagically "does the right thing".
Not pretty, but... :-)
\setupwhitespace [big]
\setuppapersize [letter]
\define[1]\mystopitemize{\stopitemize\doifsamestringelse{#1}{\par}{\blank}{#1}}
\startt
ut "should", but I will point out it isn't, at least on my
>> computer with a recently updated context.
>> Here is a non-minimal but short non-working example.
>> %%%
>> \setupwhitespace [big]
>> \setuppapersize [letter]
>> \starttext
>> This is a sh
>
>> \startitemize[packed,joinedup] should be the right combination.
>
> I won't argue about "should", but I will point out it isn't, at least on my
> computer with a recently updated context.
>
> Here is a non-minimal but short non-working example.
>
> %
is a non-minimal but short non-working example.
%%%
\setupwhitespace [big]
\setuppapersize [letter]
\starttext
This is a short paragraph.
This is a line before a {\bf packed, joinedup} itemization.
\startitemize[packed,joinedup]
\item First item.
\item Second item.
\stopitemize
nter of the ticket which is increasing.
>
> I use the following code to make it.
Here's a suggestion:
\definepapersize
[jeong]
[width=67mm,
height=73mm]
\setuppapersize
[jeong]
[A4]
\setuppaper
[nx=3, ny=4,
dx=4.4mm, dy=1.5mm]
\setuparranging
[XY]
\setuplayout
[pa
that there is a better and simpler way to do it which I don’t know.I hope that someone give me a nicer way to do it.Thank you for reading.Best regards,Dalyoung\setuppapersize[A4]%[A4]\setuplayout[ width=210mm, height=297mm, topspace=0pt, backspace=0pt, header=0mm, footer=0mm, margin=0mm, bottomspace=0mm
s in inner margins though).
Here is an example:
\setuppapersize[A4]
\setuplayout[backspace=40mm, width=100mm, leftmargindistance=5mm,
leftmargin=30mm, rightmargindistance=5mm, rightmargin=50mm, topspace=10mm]
\setuppagenumbering[alternative=doublesided]
\setupcaptions[location={outermargin, l
this MWE. Now I want to draw only the subpath of S between gong6 and
> > gong7 with a red line which is narrower at the two ends and thicker in the
> > middle part. How to achieve this?
> >
> > Thanks!
> > Emanuel
> >
> > \setuppapersize[A4,landscape]
I have this MWE. Now I want to draw only the subpath of S between gong6 and
> gong7 with a red line which is narrower at the two ends and thicker in the
> middle part. How to achieve this?
>
> Thanks!
> Emanuel
>
> \setuppapersize[A4,landscape]
>
> \starttext
>
Hi all,
I have this MWE. Now I want to draw only the subpath of S between gong6 and
gong7 with a red line which is narrower at the two ends and thicker in the
middle part. How to achieve this?
Thanks!
Emanuel
\setuppapersize[A4,landscape]
\starttext
\startMPcode
numeric u; u=1cm;
%equiangular
le so use \bold{this is bold} or {\bf this is
bold} but not \bf{this is bold}.
\definepapersize[MyBook][width=19cm,height=24cm]
\setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook
%\setuppapersize[MyBook][A4] %Would print MyBook-size pages on A4 paper
\setupbodyfont[Times Ne
take care over changing style so use \bold{this is bold} or {\bf this is
bold} but not \bf{this is bold}.
\definepapersize[MyBook][width=19cm,height=24cm]
\setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook
%\setuppapersize[MyBook][A4] %Would print MyBook-size pages on A4 paper
Ursula Hermann schrieb am 13.12.2023 um 15:22:
Dear list,
I have this example. I need the whole paragraph in color. But there is
something wrong.
\definepapersize[MyBook][width=19cm,height=24cm]
\setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook
%\setuppapersize[MyBook
Dear list,
I have this example. I need the whole paragraph in color. But there is
something wrong.
\definepapersize[MyBook][width=19cm,height=24cm]
\setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook
%\setuppapersize[MyBook][A4] %Would print MyBook-size pages on A4 paper
sided documents. The remainder of the settings will need
adjusting to suit your specific circumstances.
\setuppapersize[A4][A3]
\setuplayout[location=middle]
\setuppagenumbering[alternative=doublesided]
\setuplayout[backspace=30.8mm]
\starttext
\showlayout[4,pt,cm]
\stoptext
—
Bruce Horrock
Thanks Wolfgang.
Is this expected behavior? I'm very much confused with my second example:
\setuppapersize[A5][A4]
%\setuplayout[location=middle]
\setuplayout[location=middle,width=middle]
%\setuplayout[location=middle,width=middle,backspace=2.5cm]
\usemodule[ipsum]
\starttext
\showframe
Hello
Jigé via ntg-context schrieb am 10.12.2023 um 11:30:
Hi all,
I've been struggling with basic page layout.
The left margin extends outside the left edge of the page.
Example (from the wiki):
\setuppapersize[A4][A4] % this is the default and may be omitted
\setuplayout[backspace=20mm
Hi all,
I've been struggling with basic page layout.
The left margin extends outside the left edge of the page.
Example (from the wiki):
\setuppapersize[A4][A4] % this is the default and may be omitted
\setuplayout[backspace=20mm,
width=110mm,
topspace=20mm,
header=0mm,
footer
what is left][rightmargin 60mm]
this should leave 210-40-60=110mm in the middle, but doesn't.
The textwidth is narrowed but the margins refuse to obey their setting.
yours sincerely
dr. Hans van der Meer
\setuppapersize[A4][A4]
\setuplayout[leftmargin=40mm,rightmargin=60mm,textwidth=110mm]
\showframe
in the middle, but doesn't.The textwidth is narrowed but the margins refuse to obey their setting.
yours sincerelydr. Hans van der Meer\setuppapersize[A4][A4]\setuplayout[leftmargin=40mm,rightmargin=60mm,textwidth=110mm]\showframe\starttextsetuplayout: leftmargin=40mm, rightmargin=60mm, textwidth=110mm
that
made things very complex, and after fumbling around I managed to get this
far.
If you can take a look, or have some advice, it would be greatly
appreciated. I hope it is understandable.
My code:
%%
\setuppapersize[letter,landscape][letter,landscape]
\setuplayout[backspace=15mm,w
sincerelydr. Hans van der Meer
% test pagenumbering start-stop\setuppapersize[A5][A5]\starttext\setuppagenumbering[state=stop]\ConTeXt\space\contextversion\blankThis is page 1 without pagenumber.\crlf\page\setuppagenumbering[state=start]This should be a page with pagenumber 2.\crlfBut the pagenumber
Two column text that ends near the foot of a page can push the next line into
the footer rather than starting a new page.
MWE for ConTeXt ver: 2023.09.26 18:19 LMTX :-
\setuppapersize [A4]
\showframe
\starttext
Knuth in knolumns
\dorecurse{30}{\crlf}
\startcolumns
\input knuth
\stopcolumns
:
\showframe\showgrid\showstruts
\setuppapersize[A6]
\setupitemgroup
[itemize][1]
[ before={\blank[quarterline]},
after={\blank[quarterline]\null}]
\starttext
one
\startblockquote
\startitemize
\item
\showframe\showgrid\showstruts
\setuppapersize[A6]
\setupitemgroup
[itemize][1]
[ before={\blank[quarterline]},
after={\blank[quarterline]\null}]
\starttext
one
\startblockquote
\startitemize
\item a.
\stopitemize
\sto
gerard.degreve:
Hello Pablo,
Just try to do this :
\setupitemgroup
[itemize][1]
[ before={\blank[.125th]},
after={\blank[.125th]}\strut]
Regards,
Gerard
Le 25-09-23 19:26:08, Pablo Rodriguez a écrit :
Dear list,
I have the following sample:
\setuppapersize[A6]
\setupitemgroup
[itemize][1
Dear list,
I have the following sample:
\setuppapersize[A6]
\setupitemgroup
[itemize][1]
[ before={\blank[.125th]},
after={\blank[.125th]}]
\starttext
one
\startblockquote
\startitemize
\item a
\stopitemize
Am 25.09.23 um 17:52 schrieb Pablo Rodriguez:
Dear list,
I have the following sample (with current latest from 2023.09.18 21:13):
\setuppapersize[A6]
\starttext
\startsetups[forfootnote]
\setupitemgroup
[itemize][1]
[ before={\endgraf{\ttbf
Dear list,
I have the following sample (with current latest from 2023.09.18 21:13):
\setuppapersize[A6]
\starttext
\startsetups[forfootnote]
\setupitemgroup
[itemize][1]
[ before={\endgraf{\ttbf[before]}\endgraf},
after={\endgraf
I had no luck with page floats in columnsets; according to the manual
they should work.
Hraban
\setuppapersize[A5,landscape]
\useMPlibrary[dum]
\definecolumnset[Two][n=2]
\starttext
\startcolumnset[Two]
\dorecurse{5}{1\recurselevel\samplefile{lorem}\par}
\startplacefigure[location=page
Dear List,
I just finished my example, did some changes today and it works perfect
\setuppapersize[A8,landscape]
\setuplayout[leftmargin=2.5cm,
leftmargindistance=0.2cm,
backspace=2.9cm,
width=4cm]
\margintext{\blackrule[color=black, height=0.05ex,
width=1cm
Ursula Hermann schrieb am 12.09.2023 um 11:19:
Dear List,
I have done an little example with a \blackrule:
\setuppapersize[A8,landscape]
\setuplayout[leftmargin=2.5cm,
leftmargindistance=0.2cm,
backspace=2.9cm,
width=4cm]
\starttext
\margintext{\blackrule[color=black, height=0.05ex
Dear List,
I have done an little example with a \blackrule:
\setuppapersize[A8,landscape]
\setuplayout[leftmargin=2.5cm,
leftmargindistance=0.2cm,
backspace=2.9cm,
width=4cm]
\starttext
\margintext{\blackrule[color=black, height=0.05ex,
width=1cm]\\Me
Dear List,
After compiling the following example, which is from February 2021:
\setuppapersize[A8,landscape]
\setuplayout[leftmargin=2.5cm,
leftmargindistance=0.2cm,
backspace=2.9cm,
width=4cm]
\showframe
\starttext
\margintext{\hairline\\{Me
bruary 2021:
\setuppapersize[A8,landscape]
\setuplayout[leftmargin=2.5cm,
leftmargindistance=0.2cm,
backspace=2.9cm,
width=4cm]
\showframe
\starttext
\margintext{\hairline\\{Me}}\dontleavehmode\hairline
\startformula
a^n + b^n = c^n.
\stopformula
\stoptext
There is no pdf to read.
Uschi Hermann.
Sorry, dindn't write my name in the first Mail Today.
Von: Ursula Hermann
Gesendet: Montag, 04. September 2023 11:44
An: 'ntg-context@ntg.nl'
Betreff:
Dear List,
After compiling the following example, which is from February 2021:
\setuppapersize[A8
ion (page 31):
> \xmlfilter{#1}{./node[@type=="cleanup"]}
> It should select among the 's those with .
> However, this node is not selected in the call to \xmlfilter.
> Where am I wrong?
>
> MWE follows
>
>
> % failure to typeset attribute selected.
> \set
This line of code comes from the xml documentation (page 31):
\xmlfilter{#1}{./node[@type=="cleanup"]}
It should select among the 's those with .
However, this node is not selected in the call to \xmlfilter.
Where am I wrong?
MWE follows
% failure to typeset attribute selected.
\setu
]
\setuppapersize [A6]
\setupquotation[method=text]
Hi Wolfgang,
as always, thanks for the precise explanation. Is there a reason why
this behavior is not the default? I.e.: in what situations would the
default behavior be (more) desirable? Or is it just because
\setupquotation is a subset
On 8/19/23 17:51, Wolfgang Schuster wrote:
You can use the font method to have hyphenated words back.
The culprit which prevents hyphenation are the penalty settings
which are added by ConTeXt when the default method is used.
\mainlanguage [de]
\setuppapersize [A6]
\setupquotation[method
hyphenated words back.
The culprit which prevents hyphenation are the penalty settings
which are added by ConTeXt when the default method is used.
\mainlanguage [de]
\setuppapersize [A6]
\setupquotation[method=text]
\starttext
„Originalgenie“ „Originalgenie“ „Originalgenie“
\quotation
Hi,
is this a limitation or a bug? Text inside \quotation{} is not
hyphenated. It appears to be like this for a couple of versions, but I'm
not sure if it has always been the case. Silly example to test:
\mainlanguage [de]
\setuppapersize [A6]
\setupbodyfont [14pt]
\starttext
a écrit :
Alex Leray schrieb am 17.08.2023 um 14:41:
Hi,
I'd like to break lines in verbatim on certain characters like "/".
I can do it for normal texte, but not inside typing environment.
Do you need the verbatim environment or is the lines-environment
sufficient.
\setuppa
Alex Leray schrieb am 17.08.2023 um 14:41:
Hi,
I'd like to break lines in verbatim on certain characters like "/".
I can do it for normal texte, but not inside typing environment.
Do you need the verbatim environment or is the lines-environment sufficient.
\setuppa
Hi,
I'd like to break lines in verbatim on certain characters like "/".
I can do it for normal texte, but not inside typing environment.
Is there a way to achieve this?
Below is my test code.
Thanks,
Alex
* * *
\setuppapersize[A7]
\setbreakpoints[compound]
\starttext
1. This is
if this has been reported yet.
All best
Thomas
\setuppapersize[A4,landscape]
\setuplayout[height=fit,
width=middle,
header=0cm,
footer=0cm,
leftmargin=2cm,
topspace=1.2cm,
backspace=1.5cm]
\showframe
are too long. The
snippets can un over several pages so that recipe[^1] doesn't work for me.
[^1]: https://www.contextgarden.net/Verbatim_with_line_breaks>
Is there a way to do that?
Here is my code:
```
\definepapersize[page][width=105mm,height=148.5mm]
\setuppapersize[page, portrait][p
to the files so that my setup for xml was very simple.
Here are my setups for the layout of the novels showing some trackers
that were used as well:
\definepapersize[pagee][width=5.06in,height=7.81in]
\setuppapersize[pagee]
% XML setups here
\startsetups[grid][mypenalties]
\setdefaultpenalties
simple.
Here are my setups for the layout of the novels showing some trackers
that were used as well:
\definepapersize[pagee][width=5.06in,height=7.81in]
\setuppapersize[pagee]
% XML setups here
\startsetups[grid][mypenalties]
\setdefaultpenalties
\setpenalties\widowpenalties{1}{150
ostly working draft.
>
> * I find the waves not yet very convincing. Would it make sense to use a
> randomized sinus? (How?)
>
> * The boat should sit on the middle wave and be rotated by the current slope.
> I know I need the “time” of the upper curve and get the 1st derivation, but
to use a
randomized sinus? (How?)
* The boat should sit on the middle wave and be rotated by the current
slope. I know I need the “time” of the upper curve and get the 1st
derivation, but how?
"""
\setuppapersize[SW]
\startuseMPgraphic{Waves}
numeric height,stops,yoffset;
stop
Dear list,
having the following sample code:
\setuppapersize[A4, landscape]
\setuplayout[page]
\setupinteraction[state=start]
\starttext
\setupfield[sl][horizontal]
[frame=off, width=\textwidth, height=\textheight]
\definefield[x][signature][sl]
\field[x]
I also attach
[state=repeat].
Thank you!
But \setupbackgrounds[footer][text][background=Blocks,state=repeat]
doesn’t work.
Does this make sense if I don’t want layers in _all_ areas to repeat?
\setuppapersize[SW]
\startuseMPgraphic{Blocks}
fill unitsquare xysized (OverlayWidth * PageNumber / LastPageNumber
\setupbackgrounds[state=repeat].
\setuppapersize[SW]
\startuseMPgraphic{Blocks}
fill unitsquare xysized (OverlayWidth * PageNumber / LastPageNumber,
OverlayHeight) withcolor blue;
%setbounds currentpicture to OverlayBox;
\stopuseMPgraphic
\defineoverlay[Blocks][\useMPgraphic{Blocks}]
\setupbackgrounds[state
\useMPgraphics would be enough to re-calculate on every page?
* How can I set a background to the footer area, but page width?
* I tried \overlaywidth as well as OverlayWidth in the MP graphic – how
do I get the page size?
"""
\setuppapersize[SW]
\startuseMPgraphic{Blocks}
fill uni
Am 19.06.23 um 21:59 schrieb Henning Hraban Ramm via ntg-context:
In a minimal example like this:
\setuppapersize[A5]
\definecolumnset[TwoColumns][n=2]
\starttext
\startcolumnset [TwoColumns]
\dorecurse{10}{\samplefile{knuth}}
\stopcolumnset
\stoptext
… many columns start one line too
In a minimal example like this:
\setuppapersize[A5]
\definecolumnset[TwoColumns][n=2]
\starttext
\startcolumnset [TwoColumns]
\dorecurse{10}{\samplefile{knuth}}
\stopcolumnset
\stoptext
… many columns start one line too low and overwrite their last line.
An extended example (nearly
{#1}\hfil\vtop{#2}} but obviously
that doesn't break, so went for more ConTeXt style, but couldn't see a
good mechanism.
You can use the tabulate environment to create parallel paragraphs.
\setuppapersize[A5]
\definetabulate[bilingual][|pA{normal,verytolerant,stretch}|pA{normal,verytolerant
for more ConTeXt style, but couldn't see a
good mechanism.
Example file where you can see the entire paragraphs thing is put on the next
page.
==
\setuppapersize[A5]
\defineparagraphs[bilingual][n=2,tolerance=stretch,before=,after=,distance=\0.06
ist/tex/context/base/mkiv/cont-yes.mkiv'
Minimal example:
\enableregime[utf]
\setuppapersize[A4]
\definefontfeature[default][default][fakecombining=yes,compose=yes]
\starttypescript [serif] [adobetextpro]
\definefontsynonym[AdobeTextPro-Regular]
[file:AdobeTextPro-Regular] [features=defa
I found a MWE that shows the problem:
"""
\setuppapersize[C5]
\showframe
\starttext
\startplacefigure[location=page,title={Pagefloat}]
\framed[width=\textwidth,height=.75\textheight]{TEST}
\stopplacefigure
\dorecurse{4}{\section{Tufte \recurselevel}
\samplefile{tuf
around the page for
trimming. Does defining a paper size taller and wider than the 6x9
'pawel' paper size you gave in hte example is a solution?
For the example purposes:
\definepapersize[printing_sheet][width440pt,height=656pt]
Then use:
\setuppapersize[pawel][printing_sheet]
As I
around the page for
trimming. Does defining a paper size taller and wider than the 6x9
'pawel' paper size you gave in hte example is a solution?
For the example purposes:
\definepapersize[printing_sheet][width440pt,height=656pt]
Then use:
\setuppapersize[pawel][printing_sheet]
As I
and cutspace keys.
In the example below you can switch between the layout of the print and
screen version by changing modes.
\enablemode[print]
%\enablemode[screen]
\definepapersize [pawel] [width=432pt,height=648pt]
\setuppapersize [pawel]
\startmode[print]
\setuplayout
[backspace=52pt
for the download version.
You use the backspace key to set the value for the inner/left margin and
the width key for the textwidth.
\definepapersize [pawel] [width=432pt,height=648pt]
\setuppapersize [pawel]
\setuplayout
[backspace=60pt,
width=312pt]
\starttext
\showlayout
\stoptext
Wolfgang
welcome. My MWE:
\setuppapersize[S6]
\startuseMPgraphic{itemize:toc}
save p; path p;
p := ( (0,-0.5)--(0,0.5)--(0.866,0)--cycle ) scaled 1.5ExHeight;
fill p withcolor \MPcolor{Black};
\stopuseMPgraphic
\definesymbol[itemize:toc][\useMPgraphic{itemize:toc}]
\definelistalternative
[toclist
3mm,
margindistance=5mm,
leftmargin=20mm,
rightmargin=20mm,
edgedistance=2mm,
leftedge=5mm,
rightedge=5mm,
headerdistance=5mm,
header=10mm,
footerdistance=5mm,
footer=10mm,
topdistance=2mm,
top=5mm,
bottomdistance=2mm,
bottom=5mm,
grid=no,
]
On 4/3/23 09:07, Peter Münster via ntg-context wrote:
> Hi,
>
> I'm quite sure, that this worked some time ago with the standard font (LM):
I had the same impression, Peter.
But LM fonts don‘t have the OT feature smcp:
\setuppapersize[A8]
\starttext
\doloopoverlist{lm, pagell
below, the second example is on the second page and not next to the second
definition.
Thanks.
Fabrice
\
useMPlibrary[dum]
\setuppapersize[A4]
\mainlanguage
[fr]
\setuppagenumbering
[alternative=doublesided
. The Joy of ConTeXt!
Thanks again Wolfgang and Alan.
Best Wishes
Keith McKay
Here is the code showing the three solutions which others may find useful.
\setuppapersize[A4,portrait]%[A4,portrait]
\setuplayout
[backspace=2.5cm,
topspace=1cm,
height=28cm,
width=17cm,
header=0cm,
footer=0.75cm
f the layer. I have looked at the
> > > Wiki page on image size of combinations but still cant figure out
> > > how to do it. Any suggestions on how to go about this or is their a
> > > better way?
> > >
> > > Wiki Page reference:
> > > https://wiki
;
> > Wiki Page reference:
> > https://wiki.contextgarden.net/Combinations#Image_Width
> >
> > Thanks
> >
> > Keith McKay
> >
> > %%% example %%%
> >
> > \setuppapersize[A4,portrait]%[A4,portrait]
> >
> > \setuplayout
> >
figure out how to do it. Any
suggestions on how to go about this or is their a better way?
Wiki Page reference:
https://wiki.contextgarden.net/Combinations#Image_Width
Thanks
Keith McKay
%%% example %%%
\setuppapersize[A4,portrait]%[A4,portrait]
\setuplayout
[backspace=2.5cm,
topspace=1cm
1 - 100 of 2500 matches
Mail list logo
