On 9/20/2020 2:48 PM, Thomas A. Schmitz wrote:
Thank you, Hans, I had no idea this existed. It looks very fascinating.
But as far as I could see in the source, there is no possibility of
setting things up (font, size, start, etc.)?
setuplinennumbering should do that but i suppose we can make
On 9/17/20 3:23 PM, Hans Hagen wrote:
\setuplayout[width=16cm]
\starttext
\enabledirectives[tabulate.linenumbers]
\showframe
\starttabulate[|p(7cm)|A{verytolerant}i2p(\dimexpr9cm-2em\relax)|]
\NC
\startlinenumbering
\dorecurse{10}{\input ward \par}
On 9/13/2020 10:54 AM, Thomas A. Schmitz wrote:
Hi all,
I hope everybody made it back home safely after the meeting. It was
great listening in, even if I couldn't be there in person, unfortunately!
Today's question is an old one, but I'm confused. What I need: two
columns, of unequal width,
Hi all,
I hope everybody made it back home safely after the meeting. It was
great listening in, even if I couldn't be there in person, unfortunately!
Today's question is an old one, but I'm confused. What I need: two
columns, of unequal width, the left column has line numbering; two
column
Hello,
the following code doesn't produce vertical rule between columns:
\starttext
\startsimplecolumns[n=2,rule=on]
\input knuth
\stopsimplecolumns
\blank
\startcolumns[rule=on]
\input knuth
\column
\input knuth
\stopcolumns
\stoptext
My fault? Bug?
Best
cont...@vivaldi.net schrieb am 22.05.2020 um 14:54:
Hello,
the following code doesn't produce vertical rule between columns:
\starttext
\startsimplecolumns[n=2,rule=on]
\input knuth
\stopsimplecolumns
\blank
\startcolumns[rule=on]
\input knuth
\column
Hi,
just a remark:
\startlinecorrection
\stoplinecorrection
is meant for stuff like
\startlinecorrection
\framed{}
\stoplinecorrection
\startlinecorrection
\externalfigure[...]
\stoplinecorrection
\startlinecorrection
\startMPcode
...
\stopMPcode
\stoplinecorrection
in the main text
On 10/20/2019 3:51 PM, Henning Hraban Ramm wrote:
Hi again,
I’m testing columns again, and before I publish an article on the subject, I’d
like to check with you.
Find attached my testing environment, env_test.tex, and columns.tex, a
"product", as well as the result of compiling with
On Mon, Oct 21, 2019 at 8:24 AM Henning Hraban Ramm wrote:
> Hi again,
> I’m testing columns again, and before I publish an article on the subject,
> I’d like to check with you.
> Best, Hraban
>
Hi Hraban,
the attachment are >100K, I have made an exception but please try to stay
under 100K
> Am 2019-09-25 um 13:48 schrieb Procházka Lukáš Ing. :
>
> BTW, following "columnsets.pdf", \column has many options, unfortunately not
> so clear for me; so:
>
> \column-> go to next column?
> \column[] -> = \column?
> \column[yes] -> = \column?
> \column[page] -> go to first
Hello Hraban,
On Wed, 25 Sep 2019 13:07:50 +0200, Henning Hraban Ramm wrote:
If your ConTeXt installation is quite recent, you have
texmf-context/doc/context/documents/general/manuals/pagecolumns.pdf
This is quite new and I don’t know how usable.
useful, thanks.
(Hint for everyone: the
Am 2019-09-25 um 11:39 schrieb Procházka Lukáš Ing. :
>
> - Altough I found some wiki material about column sets (e.g.
> https://wiki.contextgarden.net/Command/setupcolumnsetstart or columns.pdf), I
> found nothing about "page columns" - can you give me a link?
Sorry, the wiki is very outdated
Hello,
thanks for reaction - so I'm starting with column sets (@Wolfgang: text from
column 2a may flow into 2b).
My code so far:
\definecolumnset[example][n=3,balancing=no]
\definecolumnsetspan[wide][n=2,background=contrast]
\setupexternalfigures[location=default]
Henning Hraban Ramm schrieb am 24.09.2019 um 18:47:
Am 2019-09-24 um 15:44 schrieb Procházka Lukáš Ing. :
I need to get columns like this:
| | 1b |
| 1a ||
+-+|
| 2a | 2b ||
| | ||
I tried the following:
\starttext
> Am 2019-09-24 um 15:44 schrieb Procházka Lukáš Ing. :
>
> I need to get columns like this:
>
>
> | | 1b |
> | 1a ||
> +-+|
> | 2a | 2b ||
> | | ||
>
> I tried the following:
>
>
> \starttext
> \startcolumns[n=2] % How to
Hello,
I need to get columns like this:
| | 1b |
| 1a ||
+-+|
| 2a | 2b ||
| | ||
I tried the following:
\starttext
\startcolumns[n=2] % How to tell that ratio between columns should be 2:1?
\input knuth % Be 1a
On 8/1/2018 12:37 PM, Pablo Rodriguez wrote:
On 08/01/2018 11:48 AM, Henri Menke wrote:
Cannot reproduce with TL2018 or latest beta.
Hi Henri,
I’m afraid that Floris is right. With latest beta and a simple
improvement to your file, I get wrong output:
\starttext
\startlines
Floris van Manen schrieb am 01.08.18 um 22:16:
Not sure as how to tell why it is misusing the line environment.
But the suggested \par solution does not work.
I took only a brief look at Henris example where I saw only the wrong
alignment
before \stopcolumns. What you can do to fix the
Pablo Rodriguez schrieb am 02.08.18 um 09:42:
On 08/01/2018 10:16 PM, Floris van Manen wrote:
Not sure as how to tell why it is misusing the line environment.
But the suggested \par solution does not work.
.F
On 1 Aug 2018, at 21:28, Wolfgang Schuster wrote:
Ending each line in a proper
On 08/01/2018 10:16 PM, Floris van Manen wrote:
> Not sure as how to tell why it is misusing the line environment.
> But the suggested \par solution does not work.
>
> .F
>
>> On 1 Aug 2018, at 21:28, Wolfgang Schuster wrote:
>>
>> Ending each line in a proper (e.g. by adding \par to finish the
Not sure as how to tell why it is misusing the line environment.
But the suggested \par solution does not work.
.F
> On 1 Aug 2018, at 21:28, Wolfgang Schuster
> wrote:
>
> Ending each line in a proper (e.g. by adding \par to finish the paragraph)
> without the misuse the lines environment
Ending each line in a proper (e.g. by adding \par to finish the paragraph)
without the misuse the lines environment fixes the problem as well.
\starttext
Testing 1971-04-26
\startcolumns[n=3]
\dorecurse{200}{+ 17271 \rightarrow\ 2018-08-08\par}
\stopcolumns
\stoptext
Wolfgang
Taco
that works indeed.
thank you
.F
> On 1 Aug 2018, at 13:04, Taco Hoekwater wrote:
>
> Hi,
>
> Same problem I had.
>
> As a workaround,
>
> \setuplayout[grid=yes]
>
> helps.
>
>> On 1 Aug 2018, at 12:37, Pablo Rodriguez wrote:
>>
>> On 08/01/2018 11:48 AM, Henri Menke wrote:
>>> Cannot
Hi,
Same problem I had.
As a workaround,
\setuplayout[grid=yes]
helps.
> On 1 Aug 2018, at 12:37, Pablo Rodriguez wrote:
>
> On 08/01/2018 11:48 AM, Henri Menke wrote:
>> Cannot reproduce with TL2018 or latest beta.
>
> Hi Henri,
>
> I’m afraid that Floris is right. With latest beta and
On 08/01/2018 11:48 AM, Henri Menke wrote:
> Cannot reproduce with TL2018 or latest beta.
Hi Henri,
I’m afraid that Floris is right. With latest beta and a simple
improvement to your file, I get wrong output:
\starttext
\startlines
Testing 1971-04-26
\startcolumns[n=3]
Cannot reproduce with TL2018 or latest beta. MWE below:
\starttext
\startlines
Testing 1971-04-26
\startcolumns[n=3]
\dorecurse{200}{+ 17271 \rightarrow\ 2018-08-08 }
\stopcolumns
\stoplines
\stoptext
On 01/08/18 21:34, Floris van Manen wrote:
Has anyone a solution / hint as how to
Has anyone a solution / hint as how to get the linespacing correct when using
columns ?
The first page works as expected,
but all the following pages have an unexpected mis-alignment in the first
column
The document itself is plain vanilla:
\starttext
\startlines
Testing 1971-04-26
Am 2017-02-26 um 16:10 schrieb Jose Luis Arellano :
> Thanks for the answer Henning. Can you please write an example?
>
> 2017-02-24 9:47 GMT-03:00 Henning Hraban Ramm :
> Am 2017-02-24 um 10:05 schrieb Jose Luis Arellano :
>
> >
You should refer to the manual that Hraban gave as a link.
Alan
On Sun, 26 Feb 2017 12:10:52 -0300
Jose Luis Arellano wrote:
> Thanks for the answer Henning. Can you please write an example?
>
> 2017-02-24 9:47 GMT-03:00 Henning Hraban Ramm :
>
> >
On 02/26/2017 04:10 PM, Jose Luis Arellano wrote:
> Thanks for the answer Henning. Can you please write an example?
Hi José Luis,
there is a sample on page 32 (from the document [or 34, from the PDF
viewer]): http://www.pragma-ade.com/general/manuals/columns.pdf#page=34.
Sorry, but my current
Thanks for the answer Henning. Can you please write an example?
2017-02-24 9:47 GMT-03:00 Henning Hraban Ramm :
> Am 2017-02-24 um 10:05 schrieb Jose Luis Arellano >:
>
> > Dear list,
> > Is there any way to write a document in columns with different
Am 2017-02-24 um 10:05 schrieb Jose Luis Arellano :
> Dear list,
> Is there any way to write a document in columns with different width?
You can use column sets, see
http://www.pragma-ade.com/general/manuals/columns.pdf
Greetlings, Hraban
---
http://www.fiee.net
Dear list,
Is there any way to write a document in columns with different width?
Thanks in advance.
jl
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist :
2015-03-21 14:33 GMT+01:00 Mikael P. Sundqvist mic...@gmail.com:
\startitemize[columns]
\item a
\item b
\item c
\item d
\item e
\item f
\stopitemize
\stoptext
This one works. Thank you!
Is there a way to have other column count than 2?
On Sat, Mar 21, 2015 at 2:54 PM, Norbert Melzer timmel...@gmail.com wrote:
This one works. Thank you!
Is there a way to have other column count than 2?
\startitemize[columns,three]
seems to give three columns.
/Mikael
The MWE at the end of this mail typesets something like this:
* a * e
* b * f
* c
* d
But I'd expect something like this:
* a * d
* b * e
* c * f
How can I get expected output?
```tex
\starttext
\startcolumns[n=2]
\startitemize
\item a
\item b
On Sat, Mar 21, 2015 at 1:38 PM, Norbert Melzer timmel...@gmail.com wrote:
\startcolumns[n=2]
\startitemize
\item a
\item b
\item c
\item d
\item e
\item f
\stopitemize
\stopcolumns
Try
\starttext
\startcolumns[n=2]
\startitemize
On 04.02.2014, at 14:52, Thomas Floeren t...@mac.com wrote:
Hi,
with the recent Betas, and the Current, I have a problem with columns and
clubpenalty. In the following minimal the long item (item 1) will introduce
a column break (instead of a simple line break):
\def
Hi all,
I've the same problem, w/o solution.
An alternative is a double line brake, but it's not a durable solution…
Pierre Bovet
Le 4 févr. 2014 à 14:52, Thomas Floeren t...@mac.com a écrit :
Sorry for bumping, but the bug is still there in the current Beta (2014.02.14
17:07).
Or,
Hi all,
I've the same problem, w/o solution.
An alternative is a double line brake, but it's not a durable solution…
Pierre Bovet
Le 4 févr. 2014 à 14:52, Thomas Floeren t...@mac.com a écrit :
Hi,
with the recent Betas, and the Current, I have a problem with columns and
clubpenalty. In
Hi,
with the recent Betas, and the Current, I have a problem with columns and
clubpenalty. In the following minimal the long item (item 1) will introduce
a column break (instead of a simple line break):
\def \defaultclubpenalty{\plustenthousand}
\starttext
\startitemize [columns]
\item This
I have some difficulties with columns inside a framedtext. The example below
shows that columns does not work inside framedtext, whereas simplecolumns does.
However, the latter does not show rules between the columns. Can I have both?
Is columns definitely not working here or is it temporarily
Am 03.10.2013 um 10:21 schrieb H. van der Meer h.vanderm...@uva.nl:
I have some difficulties with columns inside a framedtext. The example below
shows that columns does not work inside framedtext, whereas simplecolumns
does. However, the latter does not show rules between the columns. Can I
Thanks,
But I think mixedcolumns has to solve a problem width the width of the
frametext. Whereas boxedcolumns honors the width of the enclosing framedtext,
mixedcolumns does not. See the example.
% NOT OK WIDTH NOT RESPECTED
\startframedtext[width=.8\makeupwidth,align=verytolerant]
Am 03.10.2013 um 12:02 schrieb H. van der Meer h.vanderm...@uva.nl:
Thanks,
But I think mixedcolumns has to solve a problem width the width of the
frametext. Whereas boxedcolumns honors the width of the enclosing framedtext,
mixedcolumns does not. See the example.
Boxedcolumns are a
If I remember well, framedtext sets a localhsize for the width of its content.
I guess that is why boxedcolumns stays within the width specified. But is there
a specific reason why mixedcolumns in general does not?
Hans van der Meer
On 3 okt. 2013, at 12:07, Wolfgang Schuster
Am 03.10.2013 um 12:26 schrieb H. van der Meer h.vanderm...@uva.nl:
If I remember well, framedtext sets a localhsize for the width of its
content. I guess that is why boxedcolumns stays within the width specified.
But is there a specific reason why mixedcolumns in general does not?
The
On 10/3/2013 12:35 PM, Wolfgang Schuster wrote:
Am 03.10.2013 um 12:26 schrieb H. van der Meer h.vanderm...@uva.nl:
If I remember well, framedtext sets a localhsize for the width of its content.
I guess that is why boxedcolumns stays within the width specified. But is there
a specific
On Thu, Oct 3, 2013 at 6:55 PM, Hans Hagen pra...@wxs.nl wrote:
On 10/3/2013 12:35 PM, Wolfgang Schuster wrote:
Am 03.10.2013 um 12:26 schrieb H. van der Meer h.vanderm...@uva.nl:
If I remember well, framedtext sets a localhsize for the width of its
content. I guess that is why
Sorry, I should have been more clear about the intended output.
In the most common case, I simply wanted side by side output: witnesses
in the left column, and testator in the right column. Rarely, is it
expected to traverse a page. The paragraph method does this; \paragraph
goes to the top
On Thu, 12 Sep 2013, Pavneet Arora wrote:
As part of this legal document set that I have been working to put
together, I needed side-by-side text. Looking at the wiki, I noticed
that there are at least 3 methods: columns, paragraphs, columnsets.
I only attempted two, but they seem to have
As part of this legal document set that I have been working to put
together, I needed side-by-side text. Looking at the wiki, I noticed
that there are at least 3 methods: columns, paragraphs, columnsets.
I only attempted two, but they seem to have quite different results. I
understood that
I was writing a reply to Dalyoung, but Wolfgang beat me to it. So I'm
going to ask a question myself:
I'm a bit desperate about columns. I want nothing fancy, just a simple
two-columns layout for a few pages. Unfortunately, the two betas I have
on my computer both have trouble. 2012-06-30
Am 19.07.2012 um 16:51 schrieb Thomas A. Schmitz:
I was writing a reply to Dalyoung, but Wolfgang beat me to it. So I'm going
to ask a question myself:
I'm a bit desperate about columns. I want nothing fancy, just a simple
two-columns layout for a few pages. Unfortunately, the two betas
On 07/19/2012 05:03 PM, Wolfgang Schuster wrote:
I can’t give a answer without more information but you can try to use the new
columns mechanism with “\definemixedcolumns[columns]” at the begin of your
document.
Yes, this one works OK, thanks Wolfgang! I'll see if I can find a
minimal
On 19-7-2012 17:12, Thomas A. Schmitz wrote:
On 07/19/2012 05:03 PM, Wolfgang Schuster wrote:
I can’t give a answer without more information but you can try to use
the new columns mechanism with “\definemixedcolumns[columns]” at the
begin of your document.
Yes, this one works OK, thanks
On 19-7-2012 16:51, Thomas A. Schmitz wrote:
What does this bad register code mean? I don't even know where to
begin to look for an error - there is one \start - \stopcolumns
environment earlier in my document, which does appear to work normally.
Any pointers?
a box / dimen mixup .. fixing it
Is it normal that after \setupcolumns[balance=no] the dividing line is not
fully drawn in the case where the column at the left is shorter than the one to
the right.
And furthermore that balance=no inserts a pagebreak, whereas balance=yes does
not?
Below a minimal example.
Hans van der Meer
On Thu, Jun 30 2011, Willi Egger wrote:
Columnsets provide you the possibility to place column spanning pictures:
Thank you for the advice. I was hoping to avoid having to learn about
columnsets, but I suppose learning is good. Any hints on getting
columnsets and footnotes to play nicely?
Columnsets provide you the possibility to place column spanning pictures:
Willi
\definecolumnset[Doublecoltext][n=2,balance=no]
\setupcolumnset[Doublecoltext][2][distance=5mm]
\starttext
\startcolumnset[Doublecoltext]
\chapter[chap:testing]{Testing}
\input knuth
%\startpostponing
I am trying to upgrade an existing document from using texexec and
pdftex to context and luatex. Unfortunately, the document relies pretty
heavily on columns (using \startcolumns[n=2,tolerant=verytolerant]) and
the idea that figures that are too wide to place in a column float to
the top of the
On 4-3-2010 23:56, James Fisher wrote:
There was a thread about columns and whitespace ~ 2 weeks ago, but I wasn't
a subscriber then. I've just come across it independently myself. I'm not
sure what conclusion was come to. From a few tests, I'd characterize the
problem code in \startcolumns
There was a thread about columns and whitespace ~ 2 weeks ago, but I wasn't
a subscriber then. I've just come across it independently myself. I'm not
sure what conclusion was come to. From a few tests, I'd characterize the
problem code in \startcolumns as: if whitespace has been set to more
Am 04.03.10 23:56, schrieb James Fisher:
There was a thread about columns and whitespace ~ 2 weeks ago, but I
wasn't a subscriber then. I've just come across it independently
myself. I'm not sure what conclusion was come to. From a few tests,
I'd characterize the problem code in
Hallo Wolfgang,
Neither \setupwhitespace[halfline]nor
\setupcolumns[blank=halfline]is
working. Grid is off by default, isn't it?
Set the whitespace after \startcolumns.
This works, but shouldn't be the whitespace a global setting?
I found an other ?solution?
When BOTH
is it possible to get a half line space after paragraphs in
columns?
The default is no space. And
\setupwhitespace[small]
produces a whole line of space.
halfline should work unless the grid is forced (although in mkiv
different rules apply than in mkii)
Hans
Neither
Am 15.02.10 13:56, schrieb Wolfgang Werners-Lucchini:
Neither \setupwhitespace[halfline]nor \setupcolumns[blank=halfline]is
working. Grid is off by default, isn't it?
Set the whitespace after \startcolumns.
Wolfgang
Hallo,
I use:
ConTeXt ver: 2009.11.24 10:13 MKII fmt: 2009.11.24 int:
english/english
and I have many problems with columns and footnotes.
Is there a possibility to set footnotes in two columns too?
I tried
\setupfootnotes[location=columns]
but I can not see any difference to
Hallo,
is it possible to get a half line space after paragraphs in columns?
The default is no space. And
\setupwhitespace[small]
produces a whole line of space.
Wolfgang
___
If your question is of interest to
On 14-2-2010 20:49, Wolfgang Werners-Lucchini wrote:
Hallo,
is it possible to get a half line space after paragraphs in columns?
The default is no space. And
\setupwhitespace[small]
produces a whole line of space.
halfline should work unless the grid is forced (although in mkiv
different
You need textbackground to draw the frame around the text
That's the funny thing ... apparently I don't! See the code in my previous
mail. There I seem to get the frame from the \setlayerframed command alone.
You can still write the text in a buffer and use the buffer in the
streamlayer.
Am 02.01.2010 um 11:18 schrieb Oliver Buerschaper:
You need textbackground to draw the frame around the text
That's the funny thing ... apparently I don't! See the code in my previous
mail. There I seem to get the frame from the \setlayerframed command alone.
But the frame from
But the frame from setlayerframed has not the measures of the text,
to get the correct size you need textbackground.
Ah, I see! The reason I asked is I didn't see any frame with your code... I
presume I need to hook some MP overlay into textbackground?
width:
\startsetups streamlayer:test:settings
\overloadtextwidth{12cm}
\stopsetups
frame:
\definetextbackground[testframe]
\startstreamlayer[test]
\starttextbackground[testframe]
...
\stoptextbackground
\stopstreamlayer
That's exactly what I need! Based on your example I kept
Am 01.01.2010 um 15:07 schrieb Oliver Buerschaper:
Observations:
1. One can even do without the textbackground material for some reason.
You need textbackground to draw the frame around the text
2. \placestreamlayer apparently can only be used once (try uncommenting the
last lines). So
\usemodule[streams]
\definestreamlayer[test][method=overlay]
\setupbackgrounds[page][background=test]
\starttext
\startstreamlayer[test]
\startcolumns
\input knuth
\stopcolumns
\stopstreamlayer
\setlayer[test][x=5cm,y=10cm]{\placestreamlayer[test]}
\stoptext
Many thanks!
Am 26.12.2009 um 12:50 schrieb Oliver Buerschaper:
\usemodule[streams]
\definestreamlayer[test][method=overlay]
\setupbackgrounds[page][background=test]
\starttext
\startstreamlayer[test]
\startcolumns
\input knuth
\stopcolumns
\stopstreamlayer
Dear all,
how can I get columns within a layer? I tried
---
\setupbackgrounds
[page]
[background=text]
\definelayer
[text]
[width=\paperwidth,
height=\paperheight]
\startbuffer[test]
\startcolumns[n=2]
\input zapf
\stopcolumns
\stopbuffer
\starttext
Am 25.12.2009 um 20:25 schrieb Oliver Buerschaper:
Dear all,
how can I get columns within a layer? I tried
---
\setupbackgrounds
[page]
[background=text]
\definelayer
[text]
[width=\paperwidth,
height=\paperheight]
\startbuffer[test]
\startcolumns[n=2]
\input
Hello,
Can I create columns with unequal width with \startcolumns? (Say, first
column is 75% and second is 25%)
Regards,
Vaytcheslav
___
If your question is of interest to others as well, please add an entry to
On Sat, 12 Sep 2009, Vyatcheslav Yatskovsky wrote:
Hello,
Can I create columns with unequal width with \startcolumns? (Say, first
column is 75% and second is 25%)
AFAIK, no.
To create columns with different widths, you need to use columsets.
Aditya
Am 17.05.2009 um 23:31 schrieb Alan BRASLAU:
Hello,
I just completed a big project making heavy use of columnset,
columnsetspan
and paragraphs. Very powerful!
Two questions, first:
What is the real difference between columns and columnset?
I am a bit confused* about their coexistence. Is
On Monday 18 May 2009 08:45:16 Wolfgang Schuster wrote:
Am 17.05.2009 um 23:31 schrieb Alan BRASLAU:
Two questions, first:
What is the real difference between columns and columnset?
I am a bit confused* about their coexistence. Is this purposeful or
necessary
(or is it simply
Alan BRASLAU wrote:
Great! This is somewhat what I suspected (columns mechanism is the older one).
older but also conceptually different
Is there good reason to keep both mechanisms? That is, does the startcolumns
mechanism have advantages? Can't one mix one column and multicolumns text on
Hello,
I just completed a big project making heavy use of columnset, columnsetspan
and paragraphs. Very powerful!
Two questions, first:
What is the real difference between columns and columnset?
I am a bit confused* about their coexistence. Is this purposeful or necessary
(or is it simply
The manual describes a way to set footnotes in columns:
\setupfootnotes[n=number] (Context: the manual (Nov. 12, 2001), pp.
101-2)
That has caused errors for me in the 2008-10-23 or 2008-10-31 releases.
mjg
TEST DOCUMENT:
\setupfootnotes[n=2]
\starttext
First sentence here.\footnote{Note
On Tue, Apr 29, 2008 at 7:22 PM, Suno Ano [EMAIL PROTECTED] wrote:
| On Tue, 29 Apr 2008 13:40:59 +0200,
| Wolfgang Schuster
| who can be reached at: [EMAIL PROTECTED]
| (whose comments are cited below with Wolfgang ),
| had this to say in article [EMAIL PROTECTED]
| in newsgroups
On Tue, Apr 29, 2008 at 12:54 PM, Suno Ano [EMAIL PROTECTED] wrote:
Hi Folks!
I am in the curse of setting up the environment plus a project structure
for a book. My problem is with a few pages like for example colofon
where I used
,[ content from comp_colophon.tex ]
| \startcomponent
On Tue, Apr 29, 2008 at 1:32 PM, Wolfgang Schuster
[EMAIL PROTECTED] wrote:
On Tue, Apr 29, 2008 at 12:54 PM, Suno Ano [EMAIL PROTECTED] wrote:
Hi Folks!
I am in the curse of setting up the environment plus a project structure
for a book. My problem is with a few pages like for example
| On Tue, 29 Apr 2008 13:40:59 +0200,
| Wolfgang Schuster
| who can be reached at: [EMAIL PROTECTED]
| (whose comments are cited below with Wolfgang ),
| had this to say in article [EMAIL PROTECTED]
| in newsgroups gmane.comp.tex.context
| concerning the subject of Re: columns and
Oliver,
adding the option=background may help
\setupcolumns[option=background]
saji
..
* Oliver Buerschaper [EMAIL PROTECTED] [2007-07-24 14:16:34 +0200]:
Dear folks,
I'm reposting this because I haven't got any answers so far and also
because this is somewhat urgent for me. I need
Dear folks,
I'm reposting this because I haven't got any answers so far and also
because this is somewhat urgent for me. I need this for a scientific
poster which is due rather soon ... Please share your valuable advice
with me :-)
Oliver
Consider this:
---
\setupcolors
Oliver Buerschaper wrote:
Dear folks,
I'm reposting this because I haven't got any answers so far and also
because this is somewhat urgent for me. I need this for a scientific
poster which is due rather soon ... Please share your valuable advice
with me :-)
Try adding
Thanks, Taco! That workes even better than I thought ... a column gap
without color is more a feature to me than anything else ;-)
Oliver
P.S. Why's the option=background necessary from an interface point of
view? Doesn't everything else (especially \framed) do without it
happily?
Try
Dear folks,
consider this:
---
\setupcolors
[state=start]
\setupcolumns
[background=color,
backgroundcolor=red]
\starttext
\startcolumns[n=2]
\dorecurse{4}{\input tufte}
\stopcolumns
\framed[background=color,backgroundcolor=red]{Test}
\stoptext
---
Shouldn't the
Hi,
(repost - anybody got an idea on this question?)
Is it possible that align=yes/no is incorrect? See
http://source.contextgarden.net/tex/context/base/page-mul.tex?search=%40%40klalign
(search for @@klalign)
\setupcolumns accept align=yes,no,text but the source seem to indicate
that
On Fri, 29 Jun 2007 20:01:11 +0200
Patrick Gundlach [EMAIL PROTECTED] wrote:
Hi,
what is the rationale behind
\setupblank[\@@klblank]%
\ifdim\ctxparskip\zeropoint\relax
\setupwhitespace[\@@klblank]%
\fi
in page-mul.tex (columns)? It seems to me that
Hello Wolfgang,
probably I didn't understand your answer correctly. I was wondering
_why_ the ctxparskip has to be 0pt for setupwhitespace to take
effect.
Patrick
___
If your question is of interest to others as
Hi,
in \setupcolumns, what is ntop=number and height=dimension? I've
played with these parameters but couldn't see any effect.
Is it possible that align=yes/no is incorrect? See
http://source.contextgarden.net/tex/context/base/page-mul.tex?search=%40%40klalign
(search for @@klalign)
Patrick
Quoting Patrick Gundlach [EMAIL PROTECTED]:
Hi,
in \setupcolumns, what is ntop=number
From the source: the minimum number op balanced top lines
Consider
\starttext
\startcolumns[n=2,ntop=15,balance=yes]
\dorecurse{20}{This is a test line to check for balancing. }
\stopcolumns
\page
1 - 100 of 141 matches
Mail list logo