routine has
prevented any water ingress problems.
Disclaimer: I have no association with 3M; I am simply a satisfied
customer. More info is here: http://tinyurl.com/2cdrdnm
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
Mike,
Motorola Parts still carries the RCA plug with a low-loss ceramic insulator
that is intended for RF. Part Number 2882331G01, about $9 for a package of
10 plugs.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
Chuck,
Yes, the Motorola RCA plugs have the short pins, which I measured to project
5/32 beyond the edge of the outer shell.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent
of 27
VHF or 56 UHF frequencies. The power level, bandwidth, and CTCSS/CDCSS
codes are programmable. The programming procedure is contained in the CP100
User Guide 6804112J99 which, unfortunately, is no longer available from
Motorola Parts.
73, Eric Lemmon WB6FLY
-Original Message
?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Milt
Sent: Monday, May 03, 2010 5:23 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Neat kit for switching repeater devices
Oops! I just found that switch on both HPN9033A power supplies- hidden
beneath some nearly-invisible black tape that probably was affixed to keep
it from being nudged into the continuous position. I shall now return to
the kitchen for a well-earned serving of crow!
73, Eric Lemmon WB6FLY
Oops! I just found that switch on both HPN9033A power supplies- hidden
beneath some nearly-invisible black tape that probably was affixed to keep
it from being nudged into the continuous position. I shall now return to
the kitchen for a well-earned serving of crow!
73, Eric Lemmon WB6FLY
switch is available from Digi-Key for about
$9, as Catalog Number 317-1094-ND.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of na4it
Sent: Saturday, May 01, 2010 9:38 AM
To: Repeater-Builder
the
R1225 in which the fan runs continuously. Perhaps this installation is a
prime candidate for a thermal switch!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Larry Horlick
Sent: Saturday, May
Wade,
This sounds like a defective insulator or cable clamp sparking on a power
pole. Such interference can carry for many miles. Try using a portable
radio with a handheld Yagi antenna to pinpoint the source. The power
company must repair this defect.
73, Eric Lemmon WB6FLY
-Original
circuit. If
the AC buzz goes away, the utility crews must find and correct the problem.
As Kim points out, there are many possible causes of noise problems.
Question: Does the noise change or go away when it rains?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder
/O card, and they're not cheap.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of wa2uet
Sent: Monday, April 26, 2010 7:38 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] MTR2000
Yes, I can. A Systems Saber radio requires RVN4051 RSS, while a Saber radio
requires RVN4002 RSS, and an Astro Saber radio requires RVN4182 RSS.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of La
Larry,
It is a 100/110 watt PA for 138-174 MHz. It is covered by LBI-30739, here:
www.repeater-builder.com/ge/lbi-library/lbi-30739g.pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of wa0vus
Sent
Fraser,
The manual for the Helper SL-105 is here:
www.repeater-builder.com/helper/helper-ind-sinadder-1.pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of frasercastle
Sent: Sunday, April 25, 2010
number is probably C53RTB-3145xV, where x is A, B, C, or D. The V
denotes Digital Decoder.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of wb0shn
Sent: Friday, April 23, 2010 9:30 PM
To: Repeater-Builder
with much
less power.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of George
Sent: Saturday, April 24, 2010 4:25 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] how far
What
Both Newark Electronics and Digi-Key carry almost the full line of Jones
connectors. Radio Shack also has stocked a few Jones plugs for years, but
may not have that particular one on hand.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
John,
Yes, the CHP uses several VHF frequencies for extender usage. The officer
carries a VHF radio on his/her belt, and it communicates with the car radio
for relaying signals to/from the base station.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
Brian,
Please confirm, are these P50+ or SP50+ radios? They are not the same. A
list of the complete model numbers would be very helpful to those having
interest in your radios.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
of the TLN4635B SCM is in the Micor Control and Application
Manual 6881025E60, which is now NLA. However, it has been scanned and will
be posted on the RBTIP shortly.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com
Try www.rfparts.com
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Tom Parker
Sent: Monday, April 19, 2010 12:56 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] M67709SH
will be fine.
Be aware that the HVN9007 RSS is designed to work in pure DOS 6.22 on an
older 286 or 386 computer that has a serial comm port. It will NOT work in
a DOS window or a command prompt within any version of Windows, nor with
a USB port.
73, Eric Lemmon WB6FLY
-Original Message-
From
that he contact
the Motorola agent in his country to purchase the document.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of skipp025
Sent: Saturday, April 17, 2010 4:45 PM
To: Repeater-Builder
afterwards.
Since your isolators are made for 875 MHz, you might get them up to 902 MHz,
but probably not much further. YMMV...
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of La Rue Communications
magnet can affect the internal magnetic field. I certainly agree
that a network analyzer is best suited for circulator tuning.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Mel Swanberg
Sent: Friday
John,
I looked for the file in the Repeater-Builder Group files section, but
couldn't find it. What folder is it in?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of crabtreejr
Sent: Wednesday
The sticker next to each coupling assembly looks like those on Telewave
cavities. The size of the can suggests it is VHF High Band. Did you
measure its pass frequency before opening it up?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
of
the HKN4137A kit, but I would expect the thick insulation to hide some small
conductors. Caveat Emptor!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of la88y
Sent: Tuesday, April 13, 2010 6:37 AM
To: Repeater
.
Range 1 radios (136-162 MHz) contain the HLD6066B PA, while the Range 2
radios (146-174 MHz) contain the HLD6032B PA.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kris Kirby
Sent: Monday, April 12
Kris,
The detailed service manual that covers most Spectra radios is 6880102W61,
but it is now NLA. The basic service manual for VHF Spectras is 6881070C95,
and it, too, is NLA.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
Terry,
I have had great Syntor service from Bruce Lane, here:
http://www.bluefeathertech.com/
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of terry_wx3m
Sent: Sunday, April 11, 2010 8:34 AM
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of AdamW
Sent: Saturday, April 10, 2010 1:38 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Had at the hamfest
Bought a Mastr
John,
It definitely is a remote chassis- and it has only just recently been
cancelled by Motorola Parts. Perhaps you might call Motorola Parts ID at
800-422-4210, and ask the clerk what radio it belongs to and what manual
covers it. Please share the information you find.
73, Eric Lemmon WB6FLY
I have provided the info to Ken directly. It will be posted on the RBTIP
shortly.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ken Arck
Sent: Sunday, April 04, 2010 10:31 AM
To: Repeater-Builder
in the depressed position. The lid must be pressed down
firmly to engage the catch. A little WD-40 may help.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of AARON LEWIS DINKIN
Sent: Saturday, April
The C in the Combination Number indicates a 2-channel radio. More info in
Publication Index PCN5, here:
www.repeater-builder.com/ge/product-code-indexes/index-pcn5-phoenix-s-sx-ps
x.pdf
or here:
http://tinyurl.com/yzcqylc
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater
that if
the seller included the phrase original and very rare in the description,
he could ask and get $2,000 for it!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of kc7stw
Sent: Friday, March 26, 2010 11:43
in the program,
some of which may skew the results considerably. As always, YMMV...
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of James Adkins
Sent: Friday, March 26, 2010 8:54 PM
To: repeater-builder
attenuator cable would be replaced by a cable that
has negligible attenuation.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Doug
Sent: Wednesday, March 24, 2010 8:47 PM
To: Repeater-Builder
might
be prone to falsing for any reason. Therefore, you may be confident that
any standard CDCSS code is as reliable as any other. In fact, you could
select the first five codes in the list, and have the same reliability as
any five codes selected at random.
73, Eric Lemmon WB6FLY
-Original
reveal what is printed lengthwise on the jacket.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Doug
Sent: Wednesday, March 24, 2010 8:17 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
mW to 5 W,
so it can feed almost any good PA. More info is here:
www.repeater-builder.com/kenwood/pdfs/tkr-740-840-brochure.pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Jed Barton
Sent
That figure sounds like retail. I think I paid about 1900, but that was
several years ago. My local PD uses TKR-840 repeaters feeding 100 watt TPL
amplifiers in their UHF radio system.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater
and MotoTrbo digital operation, and is rated at 100 watts continuous duty-
four times the power of a MotoTrbo XPR8300 station.
I have posted some MTR3000 documents in the Files section of this group, in
the MTR3000 Folder. I have attached a copy of the cancellation notice.
73, Eric Lemmon WB6FLY
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of kc7stw
Sent: Tuesday, March 23, 2010 1:15 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Squelch crash on a MSR2000
Hello again.
I
Jorge,
You can find some good information to help you, here:
www.repeater-builder.com/motorola/r100/r100-index.html
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Jorge
Sent: Tuesday, March 23
of a board direct when I get the camera hooked up.
Milt
N3LTQ
- Original Message -
From: Eric Lemmon wb6...@verizon.net mailto:wb6fly%40verizon.net
To: Repeater-Builder@yahoogroups.com
mailto:Repeater-Builder%40yahoogroups.com
Sent: Monday, March 22, 2010 10:12 PM
Subject: [Repeater
Yep, there it is, in black and white! I've got to get some new glasses for
these tired old eyes...
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of nj902
Sent: Tuesday, March 23, 2010 7:36 PM
.
There is no separate User Manual for the GR1225.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of fyrklr3
Sent: Tuesday, March 23, 2010 3:40 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
,
this science project will form the basis of a how-to article in the RBTIP.
I don't have a UHF MSR2000 to experiment on, so I am hopeful that someone
out there may have an idle UHF MSR2000 station that can serve as a source
for the FL101 filter.
73, Eric Lemmon WB6FLY
test
instrument. I do know that the special fused BNC connectors on my R2600D
service monitor are designed to avoid an impedance bump.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Thomas Oliver
Sent
(1.5
thick) and the amount of data it contains.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of slrfbennett
Sent: Friday, March 19, 2010 3:49 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
ohm impedance is maintained when the
fuse is in place. The fuses are about the size of a grain of rice.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Dave
Sent: Saturday, March 20, 2010 3:37 PM
-86xGK, or
TK-86xHG) the service manual is B51-8328-00, about $23.
Order these manuals and programming supplies from any Kenwood parts house,
such as www.pacparts.com
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
According to Kenwood's brochure, the TK-860HG-1 is a 128-channel, 40 watt
radio for the 450-470 MHz band. The TK-862HG-1 is the same power and range,
but 8 channel. More info here:
www.pagenw.com/TK-760G(H).pdf
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder
.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Jesse Lloyd
Sent: Tuesday, March 16, 2010 8:42 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Copper pipe rather than 2/0 copper wire
That manual should be Publication Number 6880905Z90, which is NLA from
Motorola Parts. Please e-mail it direct to mycall at verizon dot net, and
I'll get it posted. Thanks!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
Go to www.aisn.com to see what aisn (the website of the original poster)
means. Strange...
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Mike Morris WA6ILQ
Sent: Saturday, March 13, 2010 10:42 AM
I have created a MotoTrbo Information folder in the Files section of this
Group. Some of the documents posted there may answer your questions.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of MCH
what model Spectra radio you have. Many accessories have separate manuals,
so please identify those as well.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of
cvrcsoar...@earthlink.net
Sent: Thursday
That doesn't meet the client's requirements. Please re-read the original
post.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of DCFluX
Sent: Tuesday, March 09, 2010 9:56 AM
To: Repeater-Builder
Skipp,
The company we're discussing is in Sun Valley, CA:
http://www.dxradiosystems.com/
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of skipp025
Sent: Tuesday, March 09, 2010 8:59 AM
To: Repeater
to
handle the scanning myself- especially if the product will be posted for
future downloading by discriminating Hams!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kris Kirby
Sent: Tuesday, March 09
remove the
filter cover in order to reach the slugs.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of kc7stw
Sent: Tuesday, March 09, 2010 8:49 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
in the Files section
of the Repeater-Builder group, along with several other cables.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Larry Horlick
Sent: Monday, March 08, 2010 5:50 PM
To: Repeater-Builder
is that
the candidate repeater must be programmable to work at 6m, without any
hardware mods or software hacks being required. The client prefers a new,
current production repeater with a warranty. Any ideas?
73, Eric Lemmon WB6FLY
David,
Thanks for the tip- I'll drop DX a line. Are you aware of any of their
products being used on 6m?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of David Epley
Sent: Monday, March 08, 2010 7
.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Jeff DePolo
Sent: Sunday, March 07, 2010 6:59 AM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Micor TLD1693 Amp
Well
Jared,
What is the model number of the voter?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of KE4ZDG
Sent: Friday, March 05, 2010 6:37 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
Nope. Both braids are silver-plated, so there's no dissimilar metals, and
no foil to rub against. RG-214/U and RG-400/U are often specified for
duplexers.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com
of
this Group.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Eric Lemmon
Sent: Sunday, March 07, 2010 3:05 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: LMR Cable
Nope
that he had been scammed, and he
said Look right here, it is stamped MIL-C-17 RG-213/U TYPE, and that means
it is genuine Mil-Spec cable! Yeah, as comedian Ron White often says, you
can't fix stupid!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
will give
us bragging rights.
Once again, I must recall my favorite repeater-coverage dictum: Repeater
coverage is determined by receiver performance, not by transmitter power.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
This is one tuning task for which my Simpson 269 VOM is worth its weight in
gold. A sensitive analog meter with a huge scale is invaluable in detecting
those tiny peaks and dips.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
on 224.500 MHz,
and I took the precaution of hanging a single ferrite isolator on its TX
output to protect the very simple 15 watt PA. So far, so good...
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf
quality is significantly inferior to that of a
scanned version of an original hard copy, but is certainly better than
nothing.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of WA2RJP
Sent: Tuesday
of January 2000, September 2000, July 2006, and August 2009. I rest my
case.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of n...@no6b.com
Sent: Sunday, February 28, 2010 8:31 AM
To: Repeater-Builder
Steve,
Why not put the DB-224 folder inside the DB Antennas folder?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of KD8BIW
Sent: Saturday, February 27, 2010 10:36 PM
To: Repeater-Builder
Kevin,
So, these tower management companies no longer allow the latest Motorola and
Kenwood stations- which come with switching power supplies- to be installed
at their sites?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil
-transformers.com/
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of JOHN MACKEY
Sent: Friday, February 26, 2010 10:49 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] LOOONG audio runs
I
power supply
is costing you a chunk of change.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of James
Sent: Saturday, February 27, 2010 9:56 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater
customer, or that it is equipped with a non-standard option. I have no info
on a TPN2264 power supply.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of zl3tda
Sent: Saturday, February 27, 2010 5:05 PM
, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ed Yoho
Sent: Friday, February 26, 2010 5:12 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Micor UHF Repeater Base 9.6 vdc
During receive only, the draw is about 0.125 amperes. During duplex
transmit, the current draw goes up to about 0.355 amperes. These numbers
were measured on one Micor station, and I would expect the current draw to
vary perhaps +/- 50 mA between various stations. YMMV.
73, Eric Lemmon WB6FLY
for it. I suspect that PL operation will be able to
operate well with a greater number of portable and mobile radios.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of kq7dx
Sent: Wednesday, February 24
would not take
the chance that a different part number element will work properly.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of tahrens301
Sent: Monday, February 22, 2010 8:21 AM
To: Repeater-Builder
is 8.5 by 11 inches, take it to a commercial
graphics house for a professional scanning job.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Benjamin L. Naber
Sent: Friday, February 19, 2010 11:39 AM
MotoTrbo handheld and mobile radios are now
being used in the Denver area. Perhaps a new perspective will help others
to justify the high cost of implementation.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com
Mike,
There's always going to be excitement about, and interest in, digital
systems. Please answer my question: How many Hams in your area have
purchased and are now using MotoTrbo radios?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
(higher capacity) power supply than you really need; in this case, larger is
not better!
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of AJ
Sent: Sunday, February 14, 2010 10:22 AM
To: Repeater-Builder
are provided 85 VAC at a maximum of 4 amperes AC, a switching power
supply appears to be the ideal solution. I have no doubt that switchers
made by Samlex, Astron, and others will offer similar performance- but, as
always, YMMV.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater
are probably
switchers, for precisely that reason.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kevin Custer
Sent: Sunday, February 14, 2010 5:43 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re
Tom,
Unless you're using a non-standard browser, the instructions for
unsubscribing are at the bottom of each message:
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of tom corso
Sent: Friday
To unsubscribe from this group, send an email to
repeater-builder-unsubscr...@yahoogroups.com
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Chuck Kelsey
Sent: Saturday, February 13, 2010 6:37 AM
at 220 MHz, and the paint on the adjustment screws is intact, suggesting
that it was never placed in service.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of de W5DK
Sent: Saturday, February 13, 2010 4:59
create a ground loop. Go here for more information:
www.astroncorp.com/showpage.asp?p=3
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of James Adkins
Sent: Friday, February 12, 2010 4:18 PM
or -48
VDC through a non-isolated converter.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of K6PNG
Sent: Friday, February 12, 2010 5:48 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater
Tim,
A Micor mobile T34RTA3800AA drawer weighs 26.5 pounds and measures 17.5 x
12.5 x 3 inches.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of tahrens301
Sent: Monday, February 08, 2010 7:19 AM
by changing C230LL, C235LL, C236LL, and C257LL.
Added C213LL.
Note that components with the LL suffix are unique to the 406-420 MHz
band.
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Larry
Sent
101 - 200 of 1837 matches
Mail list logo