They last until you can't pick them up and use them..too flimsy to handle
Ode
On 8/12/2014 2:58 AM, Dee wrote:
Can anyone tell me how long the silver rods are effective please? I've been
using mine for a couple of years now and they are really grey looking. I don't
use them that much but
Thanks Odedee
Sent from my iPad
On 13 Aug 2014, at 15:03, Ode Coyote odecoy...@silverpuppy.com wrote:
They last until you can't pick them up and use them..too flimsy to handle
Ode
On 8/12/2014 2:58 AM, Dee wrote:
Can anyone tell me how long the silver rods are effective
Can anyone tell me how long the silver rods are effective please? I've been
using mine for a couple of years now and they are really grey looking. I don't
use them that much but wondered how long they lastdee
Sent from my iPad
--
The Silver List is a moderated forum for discussing
Might be a better way but I just use Scotch Brite scour pads to clean
them off. Don't forget the contact ends. Lose a bit of silver but not
enough to notice.
Paper towel wipe after.
Ron
On 8/11/2014 11:58 PM, Dee wrote:
Can anyone tell me how long the silver rods are effective please? I've
From: Dee d...@deetroy.org
To: silver-list@eskimo.com silver-list@eskimo.com
Sent: Tuesday, August 12, 2014 12:58 AM
Subject: CSSilver rods
Can anyone tell me how long the silver rods are effective please? I've been
using mine for a couple of years now
Thanks Rondee
Sent from my iPad
On 12 Aug 2014, at 16:34, Ron ron@gmail.com wrote:
Might be a better way but I just use Scotch Brite scour pads to clean them
off. Don't forget the contact ends. Lose a bit of silver but not enough to
notice.
Paper towel wipe after.
Ron
On
-list@eskimo.com
Sent: Tuesday, August 12, 2014 12:58 AM
Subject: CSSilver rods
Can anyone tell me how long the silver rods are effective please? I've been
using mine for a couple of years now and they are really grey looking. I
don't use them that much but wondered how long they last
still needing silver rods for making silver
www.ccsilver.com/ .good source, jimOn 07/11/11, Laura Zolmanlaurazol...@hotmail.com wrote:still needing silver rods for making silver
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Roughness on a clean silver colored surface will appear whitish as will
fine silver colored dust...has to do with many angles of light reflections.
Ode
At 01:17 PM 7/5/2010 +0100, you wrote:
I've just cleaned my silver rods in my ultra-sonic cleaner. The thing is,
they seemed to have
Thanks Ode. dee
On 6 Jul 2010, at 10:12, Ode Coyote wrote:
Roughness on a clean silver colored surface will appear whitish as will fine
silver colored dust...has to do with many angles of light reflections.
Ode
--
The Silver List is a moderated forum for discussing Colloidal
I've just cleaned my silver rods in my ultra-sonic cleaner. The thing is, they
seemed to have turned white in places. The question is: will this be a problem
and what can have caused it? Bits are still silver and I watched the black
stuff come off in little clouds. I hope I haven't ruined
They're those little white squares that can clean almost anything without using
any cleaning products. dee
On 20 May 2010, at 01:57, zzekel...@aol.com wrote:
In a message dated 5/19/2010 2:38:39 P.M. Eastern Daylight Time,
res00...@verizon.net writes:
dont use melamine pads on silver rods!
I thought I would update everyone on the saga of my weird results since using
the melamine pad on the silver rods. I cleaned them using H202 and then
distilled water, but the CS still took seven hours or so and the generator
wouldn't turn off and the CS ppm measured only 4 (using a TDS) I
If necessary, you can clean the rods with drug store hydrogen peroxide on a
folded Kleenex.
That is what I do and it (usually) works.
Del
- Original Message -
From: Dorothy Fitzpatrick d...@deetroy.org
To: silver-list@eskimo.com
Sent: Wednesday, May 19, 2010 1:39 PM
Subject: CSsilver
) works.
Del
- Original Message - From: Dorothy Fitzpatrick d...@deetroy.org
To: silver-list@eskimo.com
Sent: Wednesday, May 19, 2010 1:39 PM
Subject: CSsilver rods
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http
those melamine pads are made of something that reacts to the item cleaned. why the concern about doing all this cleaning of your .999 or . silver rods. for about 5 years, just cleaning with a paper towell has been satisfactory. jimMay 19, 2010 11:10:16 AM, silver-list@eskimo.com wrote:
I
This is what I had always done, but as it was taking a bit of time for the CS
to 'do' I thought it may be the build up on the rods--hence the attempt to
clean 'properly'. dee
On 19 May 2010, at 19:33, Acmeair wrote:
those melamine pads are made of something that reacts to the item cleaned.
from a kitchen and not a sterile
environmentally controlled laboratory...what will be, will be, but I'm a happy
little vegemite, it's all top quality stuff I produce.
N.
Date: Wed, 19 May 2010 13:33:36 -0500
From: res00...@verizon.net
To: silver-list@eskimo.com
Subject: Re: CSsilver rods
In a message dated 5/19/2010 2:38:39 P.M. Eastern Daylight Time,
res00...@verizon.net writes:
dont use melamine pads on silver rods! dee
Prob'ly Ken can answer this best, but a few things come to mind;
The green scrubby's often have soap in them or other contaminants.
Polishing the silver would not be necessary in any case, mild soap,
water and three good rinses in distilled after they're cleaned, a
clean fresh paper towel after.
Possibly, you pushed contaminants from the scrubby into the micro pits
in the electrodes.
Shining up the electrodes just wastes silver, doesn't accomplish anything
and is a possible source of contamination.
.just wipe off the loose stuff with something clean.if even that.
There
Hi All,
I know this question has been answered before. Unfortunately, I
can't recall the answer.
I set up to make some CS the other night (I'm using the Silver
Puppy). I cleaned my silver rods with a clean green scrubbing pad
until they looked shiny. I used steam distilled water and
of resistance if you like, which will
occur at those irregular 'high' patches on the electrode. This could/will
affect the brewing times and the quality of the end product.
N.
From: catherine.cr...@gmail.com
Date: Sat, 31 Oct 2009 00:17:27 -0400
To: silver-list@eskimo.com
Subject: CSsilver
: forgot kind of machine CSSilver rods
Unfortunately, the specs don't say diddley about the difference
between the AC and DC units.
Useless Info about the power supply, but.
Like, what does the generator put out ???
No info.
There's no reason that the power supply should make any
@eskimo.com
Subject: Re: forgot kind of machine CSSilver rods
Unfortunately, the specs don't say diddley about the difference
between the AC and DC units.
Useless Info about the power supply, but.
Like, what does the generator put out ???
No info.
There's no reason that the power
Then, neither electrode will get very black.
If the generator has a conductivity triggered auto off and runs a while,
you *are* making CS.
The strength will be the difference between the conductivity of the water
at the start and the auto offs setting.
If you are using the setup I think
ascottsil...@aol.com wrote:
From: ascottsil...@aol.com ascottsil...@aol.com
Subject: Re: CSSilver rods
To: captain_sun...@yahoo.ca, silver-list@eskimo.com
Received: Wednesday, August 13, 2008, 10:56 PM
Hi Carrole,
If everything is the same but the generator isn't working as well as it
used to I
-list@eskimo.com
Subject: Re: forgot kind of machine CSSilver rods
Unfortunately, the specs don't say diddley about the difference
between the AC and DC units.
Useless Info about the power supply, but.
Like, what does the generator put out ???
No info.
There's no reason that the power
I don't think this was me Ode! Dee
---Original Message---
From: Ode Coyote
Date: 15/08/2008 13:19:28
To: silver-list@eskimo.com
Subject: Re: CSSilver rods
Then, neither electrode will get very black.
If the generator
has a conductivity triggered auto off and runs a while
[mailto:captain_sun...@yahoo.ca]
Sent: Wednesday, August 13, 2008 1:54 PM
To: silver-list@eskimo.com
Subject: CSSilver rods
Hi
I tried the light through the container and got a faint beam
I am wondering if my silver rods are not putting out much silver
Could this be possible?
I want to know what might be wrong
Hi Steve, what difference does the distance the rods are apart make? How
does this affect the time it takes to make the CS? Dee
---Original Message---
From: Norton, Steve
Date: 13/08/2008 23:27:04
To: silver-list@eskimo.com
Subject: RE: CSSilver rods
Carrole,
Simple
How long are you running it? thanks Debbie
--- On Wed, 8/13/08, ascottsil...@aol.com ascottsil...@aol.com wrote:
From: ascottsil...@aol.com ascottsil...@aol.com
Subject: Re: CSSilver rods
To: captain_sun...@yahoo.ca, silver-list@eskimo.com
Date: Wednesday, August 13, 2008, 10:56 PM
Hi Carrole
-list@eskimo.com
Sent: Thu Aug 14 06:10:33 2008
Subject: RE: CSSilver rods
Hi Steve, what difference does the distance the rods are apart make? How
does this affect the time it takes to make the CS? Dee
---Original Message---
From: Norton, Steve
Date: 13/08/2008 23:27:04
:54:57 2008
Subject: Re: CSSilver rods
As someone has already said, it increases current flow. The water provides a
resistance to the flow of electrical current. Moving the rods closer together
reduces the resistance to current flow by reducing the amount of water between
the two rods. Other
: 08/14/08 14:56:28
To: silver-list@eskimo.com
Subject: Re: CSSilver rods
As someone has already said, it increases current flow. The water provides a
resistance to the flow of electrical current. Moving the rods closer
together reduces the resistance to current flow by reducing the amount
available, there is no effect on
the current.
Marshall
Dee
---Original
Message---
From: Norton, Steve
Date: 13/08/2008 23:27:04
To: silver-list@eskimo.com
Subject: RE: CSSilver rods
Carrole,
Simple answer, if one of your rods turns black, you are making
colloidal
I use alternate current, and reverse polarity. dee
---Original Message---
From: Marshall Dudley
Date: 14/08/2008 15:52:19
To: silver-list@eskimo.com
Subject: Re: CSSilver rods
Dee wrote:
Hi Steve, what difference does the distance the rods are apart
make? How
does this affect
starter. But you can always reduce time significantly by adding more CS
as a starter.
- Steve
-Original Message-
From: Marshall Dudley [mailto:mdud...@king-cart.com]
Sent: Thursday, August 14, 2008 7:50 AM
To: silver-list@eskimo.com
Subject: Re: CSSilver rods
Dee wrote:
Hi Steve, what
as
that stops build up, or crud dropping to the bottom, but this of course,
makes it take longer too. dee
---Original Message---
From: Norton, Steve
Date: 14/08/2008 16:50:13
To: silver-list@eskimo.com
Subject: RE: CSSilver rods
Dee,
IMO, you can move the electrodes closer
the periodic
current and voltage readings.
Dan
-Original Message-
From: Norton, Steve [mailto:stephen.nor...@ngc.com]
Sent: Thursday, August 14, 2008 10:49 AM
To: silver-list@eskimo.com
Subject: RE: CSSilver rods
Marshall,
You are correct about there being a limit to how close you
can
!!!
- Steve
-Original Message-
From: Dan Nave [mailto:dan.n...@nilfisk-advance.com]
Sent: Thursday, August 14, 2008 10:21 AM
To: silver-list@eskimo.com
Subject: RE: CSSilver rods
Hi Steve,
Good postings.
However, I would prefer to refer to polarity switching rather than
alternating current
...@aol.com ascottsil...@aol.com
Subject: Re: CSSilver rods
To: captain_sun...@yahoo.ca, silver-list@eskimo.com
Received: Wednesday, August 13, 2008, 10:56 PM
Hi Carrole,
If everything is the same but the generator isn't working as well as it used
to I would suggest you clean the silver rods
Hi
I tried the light through the container and got a faint beam
I am wondering if my silver rods are not putting out much silver
Could this be possible?
I want to know what might be wrong with not getting as much CS
in my containers
In the beginning I seen particules and when I wiped the silver
.
Then I save 1 or 2 ounces of colloidal silver to add to the next batch I
make as a starter.
I hope this helps.
- Steve
From: Carrole Orme [mailto:captain_sun...@yahoo.ca]
Sent: Wednesday, August 13, 2008 1:54 PM
To: silver-list@eskimo.com
Subject: CSSilver rods
Hi Carrole,
If everything is the same but the generator isn't working as well as it used
to I would suggest you clean the silver rods with scotch brite and if your
generator uses batteries, change them. Typically to get stronger CS you would
run the generator longer. What kind of generator
Try
www.atlasnova.com
- Original Message -
From: Deborah Gerard
To: cs
Sent: Tuesday, May 01, 2007 7:22 PM
Subject: CSsilver rods
I know there is a place to buy replacement silver rods on the web that starts
with an A and I cannot remember the name can anyone help me out
silvergen
_
From: Deborah Gerard [mailto:devorah...@yahoo.com]
Sent: Tuesday, May 01, 2007 8:22 PM
To: cs
Subject: CSsilver rods
I know there is a place to buy replacement silver rods on the web that
starts with an A and I cannot remember the name can anyone help me out?
thanks
I know there is a place to buy replacement silver rods on the web that starts
with an A and I cannot remember the name can anyone help me out?
thanks deb
-
Ahhh...imagining that irresistible new car smell?
Check outnew cars at Yahoo! Autos.
49 matches
Mail list logo