.
On system boot up the modem installs and logs on to the Net. This connection is
always on so I use the Firestarter firewall for protection.
Best Wishes
Paul
-
Yahoo! Answers - Get better answers from someone who knows. Tryit now.
Liste de diffusion
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
The original message was received at Mon, 29 Apr 2013 14:25:09 +0600
from 145.21.181.206
- The following addresses had permanent fatal errors -
speedtouch@ml.free.fr
-- Binary/unsupported file stripped by Listar --
-- Type: application/octet-stream
-- File: message.zip
Liste de
Vous obtenez ce fichier près installation des pilotes de notre cher Bénoît
que
vous téléchargerez à partir de son site dont voici l'adresse.
http://benoit.papillaut.free.fr/speedtouch/index.php3
A+
- Original Message -
From: einstein14 [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent:
/lib/pppd/plugins/pppoatm.so
0.38
I am pretty damn sure that 0.38 is the correct specification for the UK.
Can anyone help?
Thanks,
Paul
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
merci Francois,
On 2002.04.20 18:31 Francois Rogler wrote:
On Sat, Apr 20, 2002 at 06:23:40PM +0100, Paul Thomas wrote:
Don't worry about that one, you can consider it as a warning. If
that's
worring you too much, grab the cvs version or wait for 1.1 that should
be about in a few days
**
Thanks,
Paul
Machine: OpenBSD 3.0 (patched)
Driver: Speedtouch 1.0
DSL account: Pipex UK
dmesg:
uhci0 at pci0 dev 7 function 2 Intel 82371AB USB rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2
that I
should get /etc/ppp/resolve.conf file created when I connect to
openworld - this is not happening
ifconfig shows ppp0 interface with no traffic
If I try and ping a known ip I get network unreachable
Can anyone show me where I might be going wrong
Cheers
Paul
May 27 14:21:51 andromeda
On 2002.06.04 10:12 Dr Dirk Pilat wrote:
Bonjour!
I have a couple of questions which unfortunately reflect that I am a
complete Openbsd/unix newbie.
I have read the Faq and had a look through the archives, but my
questions are just way too basic.
Please bear with me :-) .
Thanks
try pinging
the dns servers i specified in resolv.conf i get the error 'No route to host'
which does look
like the 'add default HISADDR' isn't quite working... certainly that 'add route
failed' warning *always* crops up.
Can anyone see some obvious things im missing?
Many thanks,
Paul
http
/speedtouch/speedtouch.sh file so that it is called when the modem is
brought up.
paul
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
Is there a patch suitable for FreeBSD?
Regards,
Paul Bridger
-Original Message-
From: Duncan Sands [mailto:[EMAIL PROTECTED]]
Sent: 31 January 2003 11:18
To: [EMAIL PROTECTED]
Subject: [speedtouch] [PATCH] Make modem_run usable with the kernel
driver
This patch adds a new option -k
- Original Message -
From: Martin Howitt [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, March 12, 2003 11:34 PM
Subject: [speedtouch] Re: How do I set up my Speedtouch
Hi Paul
On Wed, 2003-03-12 at 20:57, Paul Hudson wrote:
Hi,
I'm a Linux newbie so please
Hope this means something to you guys, because it don't to me.
Paul
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
The information after the modem_run looks positive enough - the lines about
ADSL sync and ADSL line.
Hope this information helps.
Many thanks
Paul
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
Hope this sheds some more light on the matter.
Many regards
Paul
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
Hi All,
- Original Message -
From: Martin Howitt [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, March 16, 2003 9:42 PM
Subject: [speedtouch] Re: How do I set up my Speedtouch
Hi Paul
On Sun, 2003-03-16 at 20:50, Paul Hudson wrote:
If you still have no connection, check
should be all about.
Once again many thanks
Paul
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
but anyones help would be
appreciated. After all the instructions I am confused on which files are
needed where and why !
I m looking for instructions from some else who has gone through this Pain
!
Thanks in advance
Paul
(Please ask if you need more information)
Thank in advance
Paul
Ducan,
one quick question the hotplug/usbspeedtouch.usermap:
speedtouch 0x0003 0x06b9 0x4061 0x 0x00 0x00 0x00 0x00 0x00 0x00
0x000 0x
should these numbers be the same as
Sep 28 12:45:51 localhost /etc/hotplug/usb.agent: ... no modules for USB
product 6b9/4061/200
if not
please help
I have installed the speed bundle, without too many errors, but still the
speedtouch driver is not being loaded when the modem is plugged in, also
when runnning pppd I still get pppoatm.so cannot be found.
[EMAIL PROTECTED] root]# modprobe speedtch
modprobe: Can't locate module
please help,
I have Redhat 9.0 freshly installed (2.4.20-8) and have comiled the kernel
without problem, I have managed to do the ./config on the speedbundle-1.0
and am now trying to do the make (with the redhat make file duncan has sent
me) this is the below output from the make ( which is
Ducnan,
I have done the
cp .config ..
make mrproper
cp ../.config .
make oldconfig
make dep
make init/main.o
and the make and install worked !
===
BUT
pppd now gives
~ÿ}#À!}!}!} }4}}} } } } }%}/Fi}3}'}}(}è~~ÿ}#À!}!}!} }4}}} }
Ducnan,
I have done the
cp .config ..
make mrproper
cp ../.config .
make oldconfig
make dep
make init/main.o
and the make and install worked !
===
BUT
pppd now gives
~ÿ}#À!}!}!} }4}}} } } } }%}/Fi}3}'}}(}è~~ÿ}#À!}!}!} }4}}} } }
I forake the user-level drivers since they don't work. I know tried the kernel mode
drivers and still no luck.
During bootup, the modem blinks ans seems to have accepted the firmware alright. While
it is downloading the firmware it says:
bulk_msg: timeout
usbdevfs: USBDEVFS_BULK failed dev 2
I tried the -e 1 command and it didn't change anything. My VPI and VCI is 0 and 35
because that is what windows alcatel client tells me. Kernel version? It is 2.4.22,
the one that comes with Slackware 9.1 and according to the drivers it should work.
Here is what i find wierd, in the alcatel
/password. To be precise, I get the following message in the
file /var/log/messages: LCP: timeout sending Config-Requests. I am
absolutely sure that the introduced pair username/password is correct.
Could somebody here please help me?
Thank you a lot in advance!
Paul
Liste de diffusion modem
share their experiances
and hopefully succeses.
Paul Leonard
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
Favre-Nicolin == Favre-Nicolin Vincent [EMAIL PROTECTED] writes:
Favre-NicolinSo I strongly encourage anyone with lots of CRC
Favre-Nicolin errors to stick with the alcaudsl.sys microcode and
Can anyone tell me where I can get this microcode?
--
Colin Paul Adams
Preston Lancashire
Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms
Help!!!
Please?
--
Colin Paul Adams
Preston Lancashire
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire
colina kernel: usb.c: USB device 4 (vend/prod 0x6b9/0x4061) is not
claimed by any active driver.
Feb 14 07:07:39 colina modem_run[1148]: BLOCK0
Can anyone tell me what is going on, so i can investigate further?
--
Colin Paul Adams
Preston Lancashire
Liste de diffusion modem ALCATEL SpeedTouch
the same thing whenever I try speedtouch-doctor. BTW, I can't
get the modem to run at all.
Please let me know if you have any joy.
--
Colin Paul Adams
Preston Lancashire
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
I think I ought to mention that I get this too - about once per month
on average.
--
Colin Paul Adams
Preston Lancashire
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
If I do that I get the following trying to build:
=== Building for pppoa-1.3.1,2
cd src gmake
gmake[1]: Entering directory
`/usr/ports/net/pppoa/work/speedtouch-1.3.1/src'
cc -Wall -I. -I/usr/local/include -I/usr/include -O2 -pipe
-fno-strict-aliasing -DVERSION=\1.3.1\ -c firmware.c
cc -Wall
interrupts
-- Thank you for your time
-- Paul G Webster
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se désinscrire : mailto:[EMAIL PROTECTED]
I managed to fix it with a little coding, it seems to have fixed the
syslogd errors as well, should I post a patch?
What I did was in the while (1) loop I made an int called checkstate,
what this does is when the modem gets a ret with 0 i.e. 'error reading
interupt' it sets checkstate to 1,
36 matches
Mail list logo
