Hi Sughosh and Tom,
On Tuesday, January 10, 2012, Sughosh Ganu urwithsugh...@gmail.com wrote:
On Mon Jan 09, 2012 at 04:30:56PM -0700, Tom Rini wrote:
On 01/09/2012 11:28 AM, Sughosh Ganu wrote:
snip
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++
Hi,
On Tue, Jan 10, 2012 at 8:13 AM, Prabhakar Lad
prabhakar.cse...@gmail.com wrote:
remove obsolete macro CONFIG_NET_MULTI, Now that none
of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it.
Signed-off-by: Prabhakar Lad prabhakar.cse...@gmail.com
Cc: Mike
This patch adds support for the Calimain board from
OMICRON electronics GmbH. The board features a Texas Instruments AM1808
SoC, 128 MB DDR2 memory, and 64 MB NOR flash memory connected to CS2 and
CS3.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
---
MAINTAINERS
the README.hawkboard
to reflect the same.
Signed-off-by: Sughosh Ganu urwithsugh...@gmail.com
Cc: Heiko Schocher h...@denx.de
Cc: Christian Riesch christian.rie...@omicron.at
Cc: Sudhakar Rajashekhara sudhakar@ti.com
Cc: Tom Rini tr...@ti.com
---
[...]
diff --git a/arch/arm/cpu
Hello Heiko,
On Wed, Jan 11, 2012 at 8:21 AM, Heiko Schocher h...@denx.de wrote:
Hello Christian,
Christian Riesch wrote:
This patch adds support for the Calimain board from
OMICRON electronics GmbH. The board features a Texas Instruments AM1808
SoC, 128 MB DDR2 memory, and 64 MB NOR flash
Hello Heiko, Sughosh,
On Wed, Jan 11, 2012 at 7:52 AM, Heiko Schocher h...@denx.de wrote:
please remove the da8xx_configure_lpsc_items() in board_gpio_init()
in the ./board/enbw/enbw_cmc/enbw_cmc.c() file, and also move ...
before I write here a lot of text, here the patch, based on yours,
-by: Heiko Schocher h...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Christian Riesch christian.rie...@omicron.at
Cc: Sudhakar Rajashekhara sudhakar@ti.com
Cc: Tom Rini tr...@ti.com
---
Changes since V2
* Made changes to fix build break on enbw_cmc board.
* Replaced defines used
Hi,
On Wednesday, January 11, 2012, Marek Vasut marek.va...@gmail.com wrote:
On Wed Jan 11, 2012 at 04:01:31PM +0100, Marek Vasut wrote:
More so, given the fact that we don't have any control over
rbl -- so if rbl changes it's layout for any subsequent board, we'd
have to add that
On Wednesday, January 11, 2012, Marek Vasut marek.va...@gmail.com wrote:
Hi,
On Wednesday, January 11, 2012, Marek Vasut marek.va...@gmail.com
wrote:
On Wed Jan 11, 2012 at 04:01:31PM +0100, Marek Vasut wrote:
More so, given the fact that we don't have any control over
rbl -- so
This patch adds support for the Calimain board from
OMICRON electronics GmbH. The board features a Texas Instruments AM1808
SoC, 128 MB DDR2 memory, and 64 MB NOR flash memory connected to CS2 and
CS3.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
---
Changes for v2:
- Removed
building the main u-boot
image, using the CONFIG_SPL_TEXT_BASE. Modified the README.hawkboard
to reflect the same.
Signed-off-by: Sughosh Ganu urwithsugh...@gmail.com
Signed-off-by: Heiko Schocher h...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Christian Riesch christian.rie...@omicron.at
Cc
On Thu, Jan 12, 2012 at 10:39 AM, Sughosh Ganu urwithsugh...@gmail.com wrote:
hi Christian,
On Thu Jan 12, 2012 at 10:02:47AM +0100, Christian Riesch wrote:
Hi Sughosh,
On Wed, Jan 11, 2012 at 6:03 PM, Sughosh Ganu urwithsugh...@gmail.com
wrote:
This patch moves hawkboard to the new spl
Hi Sughosh,
On Tue, Jan 10, 2012 at 7:12 PM, Sughosh Ganu urwithsugh...@gmail.com wrote:
The current implementation invalidates the cache instead of flushing
it. This causes problems on platforms where the spl/u-boot is already
loaded to the RAM, with caches enabled by a first stage
On Thu, Jan 12, 2012 at 2:53 PM, Sughosh Ganu urwithsugh...@gmail.com wrote:
On Thu Jan 12, 2012 at 01:03:05PM +0100, Christian Riesch wrote:
On Tue, Jan 10, 2012 at 7:12 PM, Sughosh Ganu urwithsugh...@gmail.com
wrote:
The current implementation invalidates the cache instead of flushing
Hi Albert,
On Saturday, January 14, 2012, Albert ARIBAUD albert.u.b...@aribaud.net
wrote:
Le 12/01/2012 07:29, Sughosh Ganu a écrit :
On Thu Jan 12, 2012 at 06:56:01AM +0100, Christian Riesch wrote:
On Wednesday, January 11, 2012, Marek Vasutmarek.va...@gmail.com
wrote:
snip
RBL
Hi Sughosh,
On Thursday, January 12, 2012, Sughosh Ganu urwithsugh...@gmail.com wrote:
hi Christian,
On Thu Jan 12, 2012 at 03:04:37PM +0100, Christian Riesch wrote:
On Thu, Jan 12, 2012 at 2:53 PM, Sughosh Ganu urwithsugh...@gmail.com
wrote:
On Thu Jan 12, 2012 at 01:03:05PM +0100
noticed that that pre-divider configuration was missing while
working on the lowlevel setup, but then I forgot to add it (and I was
fine with the default)... Thank you for adding it!
Acked-by: Christian Riesch christian.rie...@omicron.at
Regards, Christian
Hi Aneesh,
On Thu, Jan 19, 2012 at 11:17 AM, Aneesh V ane...@ti.com wrote:
On Thursday 19 January 2012 12:23 PM, Sughosh Ganu wrote:
Tried a few things on my end.
* Read the D-cache value in the spl, and confirmed that the data
cache is indeed not enabled.
What is the value of the B
On Thu, Jan 19, 2012 at 12:54 PM, Aneesh V ane...@ti.com wrote:
On Thursday 19 January 2012 05:00 PM, Christian Riesch wrote:
On Thu, Jan 19, 2012 at 11:17 AM, Aneesh Vane...@ti.com wrote:
On Thursday 19 January 2012 12:23 PM, Sughosh Ganu wrote:
Tried a few things on my end.
* Read
Hi Aneesh,
On Fri, Jan 20, 2012 at 9:52 AM, Aneesh V ane...@ti.com wrote:
Sughosh,
[...]
Can you send the value of SCR you found at SPL entry? This will clarify
what's enabled and what's not.
I would like to try that on my board as well for comparison. Could you
please tell me how this
Hi Aneesh,
On Fri, Jan 20, 2012 at 1:13 PM, Aneesh V ane...@ti.com wrote:
On Friday 20 January 2012 02:51 PM, Christian Riesch wrote:
On Fri, Jan 20, 2012 at 9:52 AM, Aneesh Vane...@ti.com wrote:
Sughosh,
[...]
Can you send the value of SCR you found at SPL entry? This will clarify
Hi,
On Wed, Jan 25, 2012 at 10:52 AM, Prabhakar Lad
prabhakar.cse...@gmail.com wrote:
*I want to add a command using U_BOOT_CMD in uboot, where SPL_BUILD is
enabled for example for da850evm in spl frame work how can i do that *
Why do you want to do that? A command in an SPL?
*When I tried
On Wed, Jan 25, 2012 at 11:37 AM, Wolfgang Denk w...@denx.de wrote:
In message
ca+v-a8vtoyw3x82hnrrzq--cbuhdvvsrr7srhkwm9q6huwz...@mail.gmail.com you
wrote:
*is there a support yet* to be added for printf?
This makes also no sense to me - printf is available in the SPL.
As long as
Hi,
On Wed, Jan 25, 2012 at 11:50 AM, Prabhakar Lad
prabhakar.cse...@gmail.com wrote:
On Wed, Jan 25, 2012 at 3:57 PM, Christian Riesch
christian.rie...@omicron.at wrote:
Hi,
On Wed, Jan 25, 2012 at 10:52 AM, Prabhakar Lad
prabhakar.cse...@gmail.com wrote:
*I want to add a command using
Hi,
On Fri, Jan 27, 2012 at 7:32 AM, periyasamy samy
eceperiyas...@gmail.com wrote:
hi..
i am new to u-boot and for my practice i compiled arm720t impa7 source
code using abacus-anurag-linux compiler. i am getting the following
I'm not familiar with abacus-anurag, but isn't that a different
Hi Manju,
On Fri, Jan 27, 2012 at 12:34 PM, Hadli, Manjunath
manjunath.ha...@ti.com wrote:
Hi Tom,
These patches have been posted earlier and have gone necessary
reviews and I feel they are ready to be pulled. Please pull
these pathes.
I think the last time you posted these patches was in
Hi all,
On Fri, Jan 27, 2012 at 7:33 PM, Tom Rini tom.r...@gmail.com wrote:
So, what do we want to do here? We really want to get this fix in so
we can get the hawkboard SPL changes in, and the other platforms /
fixups that are gated by that.
If I can sum it up, in the relevant section of
Hi,
On Monday, January 30, 2012, Heiko Schocher h...@denx.de wrote:
Hello Christian,
Christian Riesch wrote:
Hi all,
On Fri, Jan 27, 2012 at 7:33 PM, Tom Rini tom.r...@gmail.com wrote:
So, what do we want to do here? We really want to get this fix in so
we can get the hawkboard SPL
Hello Heiko,
On Mon, Jan 30, 2012 at 7:39 AM, Heiko Schocher h...@denx.de wrote:
Christian Riesch wrote:
2) The current version of Sughosh's patch does not change the logic
behind the LOWLEVEL_INIT defines but just fixes the code to agree with
ARM's manual. Instead of invalidating the cache
Hi,
In this patchset I tried to put everything from the discussion
in http://lists.denx.de/pipermail/u-boot/2012-January/115212.html
Although this is the first version of this patchset, the version number
is v5 since Sughosh's patches were already v4.
Regards, Christian
Christian Riesch (5
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
---
arch/arm/cpu/arm926ejs/start.S |5 -
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu
The V bit of the c1 register of CP15 should not be cleared
since the SoC has no valid memory at 0x.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Reported-by: Sughosh Ganu urwithsugh...@gmail.com
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
The low level initialization code in
arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S was written for
DM644X SoCs only. This patch makes the lowlevel_init function in this
file a dummy function for SoCs other than DM644X.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Tom Rini tr
This patch adds support for the Calimain board from
OMICRON electronics GmbH. The board features a Texas Instruments AM1808
SoC, 128 MB DDR2 memory, and 64 MB NOR flash memory connected to CS2 and
CS3.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
---
MAINTAINERS
, the cache should
be flushed instead.
Also fix the comments to match code.
Signed-off-by: Sughosh Ganu urwithsugh...@gmail.com
Rebased and corrected commit message.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
configurations that need low level initialization.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
Cc: Heiko Schocher h...@denx.de
---
arch/arm/cpu/arm926ejs/start.S |6 --
include/configs/cam_enc_4xx.h |6
the CONFIG_SPL_TEXT_BASE. Modified the README.hawkboard
to reflect the same.
Signed-off-by: Sughosh Ganu urwithsugh...@gmail.com
Signed-off-by: Heiko Schocher h...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Christian Riesch christian.rie...@omicron.at
Cc: Sudhakar Rajashekhara sudhakar@ti.com
Cc: Tom Rini tr
Hi Tom,
On Mon, Jan 30, 2012 at 6:03 PM, Tom Rini tom.r...@gmail.com wrote:
On Sun, Jan 29, 2012 at 6:36 AM, Christian Riesch
christian.rie...@omicron.at wrote:
3) As Sughosh pointed out, the current code changes the V bit
(location of exceptions). Sughosh's patch removes this code that does
Hi Daniel,
On Tuesday, January 31, 2012, Daniel Nilsson gnuf...@gmail.com wrote:
I am bringing up a board that has a Freescale P1020 (PowerPC e500v2)
and a 16-bit PC28F256J3 NOR-flash on it.
My problem is that both erases and programming takes very long time.
Reading from the flash on the
Hi Tom, Hi Matt,
On Tuesday, January 31, 2012, Tom Rini tr...@ti.com wrote:
From: Matt Porter mpor...@ti.com
Adds support for loading U-Boot from UART using YMODEM protocol.
If YMODEM support is enabled in SPL and the romcode indicates
that SPL loaded via UART then SPL will wait for start of
Hello Heiko and Sughosh,
On Wed, Feb 1, 2012 at 8:33 AM, Heiko Schocher h...@denx.de wrote:
Sughosh Ganu wrote:
On Tue, Jan 31, 2012 at 7:26 PM, Christian Riesch
christian.rie...@omicron.at wrote:
The V bit of the c1 register of CP15 should not be cleared
since the SoC has no valid memory
This patch adds support for the Calimain board from
OMICRON electronics GmbH. The board features a Texas Instruments AM1808
SoC, 128 MB DDR2 memory, and 64 MB NOR flash memory connected to CS2 and
CS3.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
---
MAINTAINERS
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
Acked-by: Heiko Schocher h...@denx.de
Tested-by: Heiko Schocher h...@denx.de
---
arch/arm/cpu/arm926ejs/start.S |5 -
1 files changed, 4 insertions(+), 1
CONFIG_SYS_EXCEPTION_VECTORS_HIGH as requested by Sughosh
and Heiko
- added Acked-bys and Tested-bys
Regards, Christian
Christian Riesch (5):
arm, davinci: Add lowlevel_init for SoCs other than DM644X
arm, arm926ejs: Do cpu critical inits only for boards that require it
arm, arm926ejs: Add option
, the cache should
be flushed instead.
Also fix the comments to match code.
Signed-off-by: Sughosh Ganu urwithsugh...@gmail.com
Rebased and corrected commit message.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
configurations that need low level initialization.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Albert Aribaud albert.u.b...@aribaud.net
Cc: Tom Rini tr...@ti.com
Cc: Heiko Schocher h...@denx.de
Acked-by: Heiko Schocher h...@denx.de
Tested-by: Heiko Schocher h...@denx.de
---
arch/arm
The V bit of the c1 register of CP15 should not be cleared on DA850
SoCs since they have no valid memory at 0x. This patch
introduces a configuration option CONFIG_SYS_EXCEPTION_VECTORS_HIGH
that allows setting the correct value for the V bit.
Signed-off-by: Christian Riesch christian.rie
the CONFIG_SPL_TEXT_BASE. Modified the README.hawkboard
to reflect the same.
Signed-off-by: Sughosh Ganu urwithsugh...@gmail.com
Signed-off-by: Heiko Schocher h...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Christian Riesch christian.rie...@omicron.at
Cc: Sudhakar Rajashekhara sudhakar@ti.com
Cc: Tom Rini tr
The low level initialization code in
arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S was written for
DM644X SoCs only. This patch makes the lowlevel_init function in this
file a dummy function for SoCs other than DM644X.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Tom Rini tr
Hi,
Thank you for re-submitting the patchset!
On Thu, Feb 2, 2012 at 2:42 PM, Manjunath Hadli manjunath.ha...@ti.com wrote:
There are two da850 SOC based EVMs, one from Spectrum digital
and other from Logic PD. Boards from Spectrum digital have mac
address stored in I2C EEPROM and they have
...@ti.com
Acked-by: Christian Riesch christian.rie...@omicron.at
Regards, Christian
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Nagabhushana Netagunte nagabhushana.netagu...@ti.com
Cc: Rajashekhara, Sudhakar sudhakar@ti.com
---
Hi,
due to lack of hardware I only compile tested this code.
I am looking forward to your comments.
Regards, Christian
board
javascript:;
Cc: Heiko Schocher h...@denx.de javascript:;
Cc: Valentin Longchamp valentin.longch...@keymile.com javascript:;
Cc: Christian Riesch christian.rie...@omicron.at javascript:;
Cc: Manfred Rudigier manfred.rudig...@omicron.at javascript:;
Cc: Mike Frysinger vap...@gentoo.org javascript
...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Valentin Longchamp valentin.longch...@keymile.com
Cc: Christian Riesch christian.rie...@omicron.at
Cc: Manfred Rudigier manfred.rudig...@omicron.at
Cc: Mike Frysinger vap...@gentoo.org
Cc: Rob Herring rob.herr...@calxeda.com
Cc: Reinhard Meyer
Hi Tom,
I tested the entire patchset with the da850evm booting from SPI flash
with SPL (make da850evm_config make u-boot.ais).
I had to add defines for mem_malloc_init to make it work, please see
my comment below.
On Wed, Aug 15, 2012 at 11:30 PM, Tom Rini tr...@ti.com wrote:
- Convert the
[cc'd Manjunath Hadli]
Hi Tom,
On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini tr...@ti.com wrote:
Add a board-specific README that documents how to write u-boot.ais to
the SPI found on this board.
Changes-series: 2
- Add
Signed-off-by: Tom Rini tr...@ti.com
---
Hi Prabhakar,
On Wed, Aug 22, 2012 at 11:07 AM, Prabhakar Lad prabhakar@ti.com wrote:
Hi,
On Wednesday 22 August 2012 01:43 PM, Christian Riesch wrote:
[cc'd Manjunath Hadli]
Hi Tom,
On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini tr...@ti.com wrote:
Add a board-specific README
Hi Tom,
On Mon, Aug 20, 2012 at 6:45 PM, Tom Rini tr...@ti.com wrote:
- Convert the non-relocation part of board_init_f to spl_board_init,
turn on CONFIG_SPL_BOARD_INIT in the configs.
- Remove duplicated code.
- Add spl_boot_device() that returns the statically chosen boot device.
I
Hi Prabhakar,
On Wednesday, August 22, 2012, Prabhakar Lad wrote:
Hi Christian,
On Wednesday 22 August 2012 02:47 PM, Christian Riesch wrote:
Hi Prabhakar,
On Wed, Aug 22, 2012 at 11:07 AM, Prabhakar Lad
prabhakar@ti.comjavascript:;
wrote:
Hi,
On Wednesday 22 August 2012
. I'm unsure
of the best way to quiet these as I don't like the idea of sprinkling
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303 and I'm sending
another email to discuss that.
--
Tom
Changes in v2:
- Add
- Add CONFIG_SYS_SPL_MALLOC_START / SIZE defines from Christian Riesch
- Add arch
image.
Signed-off-by: Tom Rini tr...@ti.com
---
Changes in v2:
- Add
Changes in v3:
- Fix thinko, Nand - SPI (spotted by Prabhakar Lad)
- Rename to README.da850, add more direct recovery method (Christian Riesch)
board/davinci/da8xxevm/README.da850 | 62
Hi Tom,
On Thu, Aug 23, 2012 at 1:19 AM, Tom Rini tr...@ti.com wrote:
- Convert the non-relocation part of board_init_f to spl_board_init,
turn on CONFIG_SPL_BOARD_INIT in the configs.
- Remove duplicated code.
- Add spl_boot_device() that returns the statically chosen boot device.
.
Signed-off-by: Tom Rini tr...@ti.com
Acked-by: Christian Riesch christian.rie...@omicron.at
Regards, Christian
---
Changes in v2:
- Add README.da850_am18xxevm
Changes in v3:
- Fix thinko, Nand - SPI (spotted by Prabhakar Lad)
- Rename to README.da850, add more direct recovery method
as well as how to write
a recovery image.
Signed-off-by: Tom Rini tr...@ti.com
---
Changes in v2:
- Add README.da850_am18xxevm
Changes in v3:
- Fix thinko, Nand - SPI (spotted by Prabhakar Lad)
- Rename to README.da850, add more direct recovery method (Christian Riesch)
Changes in v4
Hi,
On Sun, Sep 16, 2012 at 5:36 PM, Marek Vasut ma...@denx.de wrote:
Dear José Miguel Gonçalves,
On 09/16/2012 11:06 AM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
On 09/15/2012 07:03 PM, Marek Vasut wrote:
Dear José Miguel Gonçalves,
Jumping to board_init_r is not performed
Hi,
On Sun, Sep 16, 2012 at 11:27 AM, José Miguel Gonçalves
jose.goncal...@inov.pt wrote:
On 09/14/2012 08:08 PM, Tom Rini wrote:
On Fri, Sep 14, 2012 at 06:29:01PM +0100, Jos?? Miguel Gon??alves wrote:
Samsung's S3C24XX SoCs need this in order to generate a binary image
with the SPL and
Hi,
On Mon, Sep 17, 2012 at 10:34 AM, José Miguel Gonçalves
jose.goncal...@inov.pt wrote:
On 09/17/2012 07:28 AM, Christian Riesch wrote:
Hi,
On Sun, Sep 16, 2012 at 5:36 PM, Marek Vasut ma...@denx.de wrote:
Dear José Miguel Gonçalves,
On 09/16/2012 11:06 AM, Marek Vasut wrote:
Dear
changed, 19 insertions(+), 7 deletions(-)
Acked-by: Christian Riesch christian.rie...@omicron.at
For the calimain board
Tested-by: Christian Riesch christian.rie...@omicron.at
Regards, Christian
___
U-Boot mailing list
U-Boot@lists.denx.de
http
Hi Mikhail,
On Tue, Jun 12, 2012 at 11:15 PM, Mikhail Kshevetskiy
mikhail.kshevets...@gmail.com wrote:
follow section 15.2.13.1 (Initializing Following Device Power Up or Reset) of
OMAP-L138 DSP+ARM Processor Technical Reference Manual
Signed-off-by: Mikhail Kshevetskiy
the checkpatch warning here (no spaces at start of line).
Otherwise:
Acked-by: Christian Riesch christian.rie...@omicron.at
Tested-by: Christian Riesch christian.rie...@omicron.at
Regards, Christian
#if defined(CONFIG_APTIX)
/* /13 mode so Aptix 6MHz can hit 115200 */
diff --git
Hi Prabhakar,
On Thu, Jun 21, 2012 at 9:51 AM, Prabhakar Lad prabhakar@ti.com wrote:
From: Rajashekhara, Sudhakar sudhakar@ti.com
AHCLKR/UART1_RTS/GP0[11] pin needs to be configured for
MMC and NOR to work on DA850/OMAP-L138 Rev.3 EVM. When
GP0[11] is low, the SD0 interface will not
@ti.com
Signed-off-by: Rajashekhara, Sudhakar sudhakar@ti.com
Signed-off-by: Hadli, Manjunath manjunath.ha...@ti.com
Acked-by: Christian Riesch christian.rie...@omicron.at
Regards, Christian
---
Chnages for v3:
1: Creted new patch by splitting patch 6 of v2, to make
it more readable
-by: Christian Riesch christian.rie...@omicron.at
Regards, Christian
Changes for v2:
1: Fixed comments from Tom to remove unused macro
and add comment.
2: Fixed comments from Christian to move GPIO pins
to board file and add a check to perform initializations
only when
series
has been tested by Christian Riesch (christian.rie...@omicron.at)
for regression.
Changes for v2: 1: Fixed comments from Tom to remove unused macro
and add comment. 2: Fixed comments from Christian to move GPIO
pins to board file and add a check to perform initializations only
when
Hi Sughosh,
On Mon, Jul 2, 2012 at 9:24 PM, Sughosh Ganu urwithsugh...@gmail.com wrote:
hi,
While testing on hawkboard with the latest commit, i hit an issue of
commands not being accepted.
hawkboard reset
Unknown command '�' - try 'help'
hawkboard
Running git bisect showed that
[cc'd Prabhakar Lad, Tom Rini, and Scott Wood]
Tyler,
On Thu, Jul 26, 2012 at 5:37 PM, Tyler Olmstead
tyler.j.olmst...@gmail.com wrote:
Hi all,
I have encountered some issues adding a board-specific command to the
board file of a project I have been working on. Specifically, after
adding a
Hi,
On Thursday, July 26, 2012, Aneesh V wrote:
Hi Tyler,
On 07/26/2012 11:54 AM, Tyler Olmstead wrote:
Hi Christian,
On Thu, Jul 26, 2012 at 10:03 AM, Christian Riesch
christian.rie...@omicron.at wrote:
[cc'd Prabhakar Lad, Tom Rini, and Scott Wood]
Tyler,
On Thu, Jul 26, 2012
Hi,
On Sun, Nov 11, 2012 at 6:47 AM, Mike Frysinger vap...@gentoo.org wrote:
When using open(), the O_CREAT flag must be given a mode, otherwise it
uses random garbage from the stack. Also, it can fail to build:
In file included from /usr/include/fcntl.h:290:0,
from
Hi Tom,
On Fri, Dec 14, 2012 at 10:52 PM, Tom Rini tr...@ti.com wrote:
Hey all,
I've tagged and pushed v2013.01-rc2 now. The next branch has been open
for a little bit, and is still open now, and in sync. Here's where
we're at:
- I expect a USB pull request from Marek soon.
- I've
Signed-off-by: Christian Riesch christian.rie...@omicron.at
---
board/omicron/calimain/calimain.c | 31 ++-
include/configs/calimain.h|2 ++
2 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/board/omicron/calimain/calimain.c
b/board/omicron
Currently eth_random_enetaddr() seeds the random number generator with
get_timer(0). Some boards might want to use other sources for the seed,
therefore move the call of srand() to the board specific code.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Michael Walle mich
of the uninitialized
SRAM of the AM1808 SoC.
Regards, Christian
Cc: Tom Rini tr...@ti.com
Cc: Joe Hershberger joe.hershber...@gmail.com
Cc: Michael Walle mich...@walle.cc
Christian Riesch (2):
net: Remove call of srand from eth_random_enetaddr()
calimain: Generate random MAC address for factory tests
Hello Wolfgang,
Thank you for your comments.
On Tuesday, January 8, 2013, Wolfgang Denk wrote:
Dear Christian Riesch,
In message
419e5c6e-b2ef-44c2-a4c1-bb25c50fc...@mary.at.omicron.atjavascript:;
you wrote:
Currently eth_random_enetaddr() seeds the random number generator
Hello Wolfgang,
Thank you again for your comments.
On 2013-01-08 18:39, Wolfgang Denk wrote:
Dear Christian Riesch,
In message 6cc4810c-1e2e-4ebf-912a-96936f035...@mary.at.omicron.at you wrote:
Signed-off-by: Christian Riesch christian.rie...@omicron.at
---
board/omicron/calimain/calimain.c
Hi Stefan,
On Fri, Jun 1, 2012 at 11:52 AM, Stefan Roese s...@denx.de wrote:
This patch moves all bootcount implementations into a common
directory: drivers/bootcount. The generic bootcount driver
(bootcount.c) is now usable not only by powerpc platforms, but
others as well. Highbank is
is now usable not only by powerpc platforms, but others as well.
Signed-off-by: Stefan Roese s...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Valentin Longchamp valentin.longch...@keymile.com
Cc: Christian Riesch christian.rie...@omicron.at
Cc: Manfred Rudigier manfred.rudig...@omicron.at
-by: Christian Riesch christian.rie...@omicron.at
Thanks, Christian
Signed-off-by: Stefan Roese s...@denx.de
Cc: Heiko Schocher h...@denx.de
Cc: Valentin Longchamp valentin.longch...@keymile.com
Cc: Christian Riesch christian.rie...@omicron.at
Cc: Manfred Rudigier manfred.rudig...@omicron.at
Hi,
On Fri, Jun 1, 2012 at 4:30 PM, Prabhakar Lad prabhakar@ti.com wrote:
From: Lad, Prabhakar prabhakar@ti.com
This patch adds support for MMC/SD on DA850/OMAP-L138.
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
Signed-off-by: Rajashekhara, Sudhakar sudhakar@ti.com
Hi,
On Fri, Jun 1, 2012 at 3:48 PM, Prabhakar Lad prabhakar@ti.com wrote:
From: Rajashekhara, Sudhakar sudhakar@ti.com
According to DA850/OMAP-L138 schematics, GP2[6] line has to be driven
high for RMII mode to work. In RMII mode, SPI flash becomes un-usable.
But during testing it
Hi,
On Fri, Jun 1, 2012 at 4:30 PM, Prabhakar Lad prabhakar@ti.com wrote:
From: Lad, Prabhakar prabhakar@ti.com
This patch adds support for NAND SPL on DA850/OMAP-L138.
Signed-off-by: Lad, Prabhakar prabhakar@ti.com
Signed-off-by: Rajashekhara, Sudhakar sudhakar@ti.com
Hi,
On Fri, Jun 1, 2012 at 3:34 PM, Prabhakar Lad prabhakar@ti.com wrote:
From: Rajashekhara, Sudhakar sudhakar@ti.com
On DA850/OMAP-L138 it was observed that in RMII mode,
auto negotiation was not performed. This patch enables
auto negotiation in RMII mode. Without this patch, EMAC
Hi,
Sorry for the delay, had a lot of other work to do :-/
On Thursday, June 7, 2012, Prabhakar Lad wrote:
From: Lad, Prabhakar prabhakar@ti.com javascript:;
DA850/OMAP-L138 does not support strict MMC/SD boot mode. SPL will
be in SPI flash and U-Boot image will be in MMC/SD card. SPL
Hi,
On Tuesday, June 12, 2012, Mikhail Kshevetskiy wrote:
Signed-off-by: Mikhail Kshevetskiy
mikhail.kshevets...@gmail.comjavascript:;
---
arch/arm/cpu/arm926ejs/davinci/Makefile |5 ++
arch/arm/cpu/arm926ejs/davinci/spl.c | 91
+++---
Hi Prabhakar,
On Tue, Jun 19, 2012 at 7:06 AM, Lad, Prabhakar prabhakar@ti.com wrote:
Hi Christian,
On Tue, Jun 19, 2012 at 01:09:08, Christian Riesch wrote:
Hi,
Sorry for the delay, had a lot of other work to do :-/
On Thursday, June 7, 2012, Prabhakar Lad wrote:
From: Lad
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Sandeep Paulraj s-paul...@ti.com
---
arch/arm/cpu/arm926ejs/davinci/Makefile|2 +-
.../arm/cpu/arm926ejs/davinci/pinmux.c |0
arch/arm/include/asm/arch-davinci/hardware.h |2 ++
board
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Stefano Babic sba...@denx.de
Cc: Heiko Schocher h...@denx.de
---
.gitignore |1 +
Makefile |7 +++
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/.gitignore b/.gitignore
index 70a11f7..1c5defd 100644
was copied
nevertheless.
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Stefano Babic sba...@denx.de
Cc: Heiko Schocher h...@denx.de
---
tools/mkimage.c | 97 ---
1 files changed, 49 insertions(+), 48 deletions(-)
diff --git
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Sandeep Paulraj s-paul...@ti.com
---
arch/arm/cpu/arm926ejs/davinci/Makefile |3 ++-
arch/arm/cpu/arm926ejs/davinci/spl.c| 11 ++-
2 files changed, 12 insertions(+), 2 deletions
This patch replaces the pinmuxing functions from
arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c by those of
arch/arm/cpu/arm926ejs/davinci/pinmux.c
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Heiko Schocher h...@denx.de
Cc: Sandeep Paulraj s-paul...@ti.com
---
arch/arm/cpu
Signed-off-by: Christian Riesch christian.rie...@omicron.at
Cc: Wolfgang Denk w...@denx.de
---
arch/arm/lib/eabi_compat.c |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/lib/eabi_compat.c b/arch/arm/lib/eabi_compat.c
index eb3e26d..2d49a28 100644
--- a/arch
1 - 100 of 295 matches
Mail list logo
