for rationalisation.
Cheers
Tom
On Wed, 28 Feb 2024 at 19:01, Alex, VE3NEA via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Splitting the UI and data processing code would mean a major rewrite of
> the project. It might be much easier to implement some
> API, e.g. REST-based, fo
Sounds like a memory leak.
If you can run task manger and monitor the memory tab to see which program
continues to consume memory, it may help to identify the cause.
> On Feb 14, 2024, at 12:09 AM, Alan McDonald via wsjt-devel
> wrote:
>
> Yes - Windows
>
> Alan VK1AO
>
> -Original
Broken in 60 seconds by looking at the source code. See APRS-IS.
On Thu, 5 Oct 2023 at 09:36, Adrian via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> As a victim of another local foundation ham (caught) unlawfully using my
> callsign on 20m FT8 recently, and reports
>
> heard of other
on your working system. Here it is -1,268.000 000 Mhz - note the
comma as the separator on 1,268
Harry your example had no comma. Could it be the locale I have set to UK ?
Thanks
Tom
Tom GM8MJV
t...@tkrh.co.uk
> On 18 Jul 2023, at 17:37, Harry E. Hoffman via wsjt-devel
> wrote:
&
. Cat and freq both ok.
Thanks in advance for any suggestions but it does look like a bug rather than
user error.
Tom GM8MJV
t...@tkrh.co.uk
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt
Hey Jim
Kubuntu 18.04 went out of support in May 2021. Time to upgrade…
Best wishes
Tom
On Sun, 14 May 2023 at 01:58, Jim Shorney via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
>
> 2.7.0-rc1 fails to compile in Kubuntu 18.04 with the following errors:
>
> [ 98%] B
Hey Reino
I fully understand your concerns. Clearly this idea has been considered.
Conceptually I believe a slightly different approach might overcome some of
those difficulties, however I am conscious of derailing Uwe’s thread, so I
won’t.
Uwe, good luck with the search.
Best wishes
Tom
, then at least there would be regression
tests. Future bug fixes could have test cases added to prevent further
regression, again without requiring physical radios and manual testing.
Apologies if I am not the first to ask this question.
Kind regards
Tom M0LTE
On Sat, 13 May 2023 at 08:11, Uwe
Probably one for the main mailing list (https://wsjtx.groups.io/g/main)
rather than the dev mailing list
That said, can you describe your whole cable setup please? The issue may be
obvious.
Tom M0LTE
On Sun, 16 Jan 2022 at 16:06, Richard Shaw via wsjt-devel <
wsjt-devel@lists.sourceforge.
exited. WSJT would not run until I rebooted the computer.
I called him again and the same think happened. (after reboot)
WSJT-X 2.5.3
Win 10
Apachie Labs 7000 Radio
FT8.
73 Tom AA4VV
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https
used by any other applications. If using another OS I can't help
with method of checking com port existence.
Regards
Tom
GM8MJV
> On 16 Nov 2021, at 17:12, crohtun via wsjt-devel
> wrote:
>
> P
> <https://apps.apple.com/us/app/aol-news-email-weather-video/id646100661
Installation packages are linked from the WSJT-X website:
https://physics.princeton.edu/pulsar/k1jt/wsjtx.html
This question probably better suited for the users mailing list:
https://groups.io/g/WSJTX
Regards
Tom
On Fri, 5 Nov 2021 at 08:17, Hilik Poleg via wsjt-devel <
wsjt-de
of the developers changing
something as long standing as grid/report is so small it’s not worth computing.
Have fun and enjoy chasing grids
Tom
GM8MJV
> On 2 Aug 2021, at 21:07, Jeff Stai via wsjt-devel
> wrote:
>
> To save those 30 seconds, I've lately set my software to do signal report
@lists.sourceforge.net Cc: Bill Somerville
Subject: Re: [wsjt-devel] WSJT-X and Omni-Rig: Failed to start Omni Rig COM
server
Hi Tom,
OK, so there something else going on as
well. You state below that old versions of WSJT-X have also
started showing this issue
in the past.
I have seen several reports of this in your groups.io group in the past.
Of course this is solved by putting in Run as Administrator in the shortcut for
WSJT. But the question is why all of a sudden?
73 Tom
From: Bill Somerville via wsjt-devel
Sent: Sunday, July 18, 2021 3:29 PM
Hi
Exactly the same for all users.
Don’t know where to go from here….
73 Tom
From: Bill Somerville via wsjt-devel
Sent: Sunday, July 18, 2021 2:22 PM
To: wsjt-devel@lists.sourceforge.net
Cc: Bill Somerville
Subject: Re: [wsjt-devel] WSJT-X and Omni-Rig: Failed to start Omni Rig COM
aries are you using for serial port access? Or the com server?
73 Tom
From: Bill Somerville via wsjt-devel
Sent: Sunday, July 18, 2021 1:32 PM
To: wsjt-devel@lists.sourceforge.net
Cc: Bill Somerville
Subject: Re: [wsjt-devel] WSJT-X and Omni-Rig: Failed to start Omni Rig COM
server
T
Hi
There is no such path. I am using omni-rig 1.19 just downloaded from the web
at dxatlas.
The use of administrator mode only works for the 64 bit WSJT. The 32 bit fails
with both user and administrator mode. Always failed to start the omnirig com
server.
Tom
From: Bill
server
Hi Tom,
that's not how Omni-Rig behaves for me,
if I start it manually the setup dialog stays open until it is
cancelled or closed with the OK button. Starting WSJT-X to
communicate with it doesn't change that. What version of Omni-Rig
are you using
that have reported this in the past.
73 Tom
From: Bill Somerville via wsjt-devel
Sent: Friday, July 16, 2021 4:03 PM
To: wsjt-devel@lists.sourceforge.net
Cc: Bill Somerville
Subject: Re: [wsjt-devel] WSJT-X and Omni-Rig: Failed to start Omni Rig COM
server
Hi Tom,
OK, I've not see
other
software that uses omnirig. It's strange because this always worked in the
past.73 Tom va2fsqSent from my Galaxy
Original message From: Bill Somerville via wsjt-devel
Date: 2021-07-16 3:36 p.m. (GMT-05:00) To:
wsjt-devel@lists.sourceforge.net Cc: Bill Somerville
in
administrator mode. No other related software is running. This is with a
direct connection to the radio.
Details, version 2.4.0 (happens on previous version as well).
Windows 10, version 19041.1083
73 Tom va2fsq
--
This email has been checked for viruses by Avast antivirus software.
https
in
administrator mode.
Details, version 2.4.0 (happens on previous version as well).
Windows 10, version 19041.1083
73 Tom va2fsq
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
___
wsjt-devel
ttp://qrz.com/> data.
Personally think it’s a really bad idea to mess around like this - leave the
wsjx adi file alone - warn/report by all means but ‘on the fly’ changes are not
good.
Tom
GM8MJV
> On 8 Mar 2021, at 15:13, Dave Slotter, W3DJS wrote:
>
> Fellow hams and users of WS
suggestion
Tom
GM8MJV
> On 19 Feb 2021, at 20:28, Gary Gearhart wrote:
>
> Program version: V2.4.0-rc1
> Operating System: Windows 10 PRO
> Problem: popup error concerning “STACK ERROR” and “orphaned JT9 process” plus
> “fatal error”
> Sequence: this has occurred 3 tim
a chuck of this reply so the thread does not go
down hill fast.
Expressed my point I hope some more consideration may be given if this sort of
issue arrises in the future.
Tom
GM8MJV
> On 16 Feb 2021, at 10:32, Bill Somerville wrote:
>
> Hi Alex and Tom,
>
> the Hamlib change w
to
change their software to over-ride the changes we made. Just keep defaults as
they were and all will be happy.
End of rant
Tom
GM8MJV
> On 16 Feb 2021, at 04:54, Black Michael via wsjt-devel
> wrote:
>
> A couple of complaints from those who were using a single instance we
I would be happy to help debug it..
Tom AA4VV
On 2/10/2021 5:11 PM, Black Michael via wsjt-devel wrote:
Would you be available for some debugging?
I'll be back in a little while and perhaps we can connect up and I can
see the problem and debug it?
Mike W9MDB
On Wednesday, February 10
when I change bands.
After one TX in FT8 then the TX VFO is set correctly.
I'm using WSJT-X V2.4.0 RC1
Is there any way I can use this driver and have the Split Option to work
like "Fake It" ?
Thanks
Tom AA4VV
___
wsjt-devel mailing list
on detecting and blocking the robots and flag
those.
Tom
GM8MJV
> On 9 Feb 2021, at 10:37, Anders Strange wrote:
>
> Would it be an idea to implement a 'Valid DXCC' checking and 'Pirate
> Detection' feature?
>
> The problem is that pirate callsigns like the Dxx from
as expected.
I am using a 3rd party tool (JTAlert) - this is reporting 2m - which is
correct for the rig but not to operating freq
Is there a way wsjt-x can send the actual frequency - not checked my logger yet
to see if does something similar.
Thanks
Tom
GM8MJV
Anyone any thoughts on this?
Happened again on the last RSGB FT4 contest last week.
Tom
GM8MJV
> On 23 Dec 2020, at 12:11, tom wrote:
>
> Hi All
>
> Was in an FT4 contest and noticed the reports logged in wsjt_log.adi do not
> match up with what was sent - or in
20201222
122045 40m 7.048758 GM8MJV
IO85MU 50 GM8MJV
Is this by design or a bug - if no report was sent nothing should be logged,
would have thought if something, then 00 and not the previous QSO.
Tom
GM8MJV
___
wsjt-devel mailing list
wsjt-devel
Someone I know has forked WSJT-X to get the tone sequence at the start of
the TX cycle, which he then passes to a microcontroller embedded inside an
FM radio, which is set up to change the frequency of the unmodulated FM
carrier as per FT8 tones. RX is an RTL dongle. He makes contacts this way,
so
I missing something?
Cheers
Tom
On Sat, 5 Dec 2020 at 22:51, Dave Slotter, W3DJS
wrote:
> Hi Bill,
>
> You've been very clear in two separate messages that you're not going to
> be accepting any code merges from me for this functionality -- even in a
> suggested reduced format.
-x and default
to what has been set by the user?
Regards
Tom
--
73
Tom
GM8MJV (IO85)
> On 2 Sep 2020, at 16:40, Sam W2JDB via wsjt-devel
> wrote:
>
> Hi Bill,
>
> Checked with the UDP_Daemon and the mode change was being captured.
>
> I found the problem in
Looks very much like you have a copy of WSJT-X still running while trying the
install.
Reboot to ensure all wsjt-x processes stopped and re-try.
Tom
--
73
Tom
GM8MJV (IO85)
> On 16 Jul 2020, at 15:50, Frank Kirschner wrote:
>
> I'm using a Flex 6600 and wsjt-x v 2.1.0. When
No issues with the FT100
1021 Yaesu FT-100 20200323.0 Beta
RIG_MODEL_FT100
Tom
--
73
Tom
GM8MJV (IO85)
> On 16 Jul 2020, at 05:11, Black Michael via wsjt-devel
> wrote:
>
> If anybody has a rig out there that's in this list
demarcation between these groups or is this another
support group with some development questions tossed in?
I’m asking so I set my expectations.
Thanks,
Tom NY4I
Principal Solutions Architect
Better Software Solutions, Inc.
727-437-2771
___
wsjt
, and then it worked! I checked, starting N1MM+ first, then
WSJT-X provokes the Hamlib error again.
73 de Tom OH6VDA
> 11. jun. 2020 kl. 15:50 skrev Bill Somerville :
>
>
> Mike,
>
> the microHAM uRouter application provides two sets of virtual serial ports
> per r
router thing. My computer skills have, I
am afraid, clear limitations.
73,
Tom OH6VDA
> 11. jun. 2020 kl. 09:10 skrev Tom Ramberg :
>
> No. That's it.
>
> 73
> Tom OH6VDA
> Sendt fra min iPad Air 2
>
>>> 10. jun. 2020 kl. 16:20 skrev Bill Somerville :
>&
No. That's it.
73
Tom OH6VDA
Sendt fra min iPad Air 2
> 10. jun. 2020 kl. 16:20 skrev Bill Somerville :
>
>
> On 10/06/2020 14:11, Bill Somerville wrote:
>> On 10/06/2020 14:01, Tom Ramberg wrote:
>>> First it happens when I set the Com port In th
the setup as uncomplicated as
possible. Getting rid of the Microkeyer is not an option, I am afraid.
Tom OH6VDA
> 10. jun. 2020 kl. 20:23 skrev Black Michael :
>
>
> It sounds like you're trying to do port sharing. I'm don't believe the
> microham supports that. I believe
Starting WSJT-X with FTdx3000 and using 2nd CAT port in MicroHams device router
gives Hamlib error.
de OH6VDA TOM
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Hi
Just noticed my Icom IC-9700 does it as well - personally would like this to be
an option - or a way to turn off the rig when exiting the application that
started it up.
Tom
--
73
Tom
GM8MJV (IO85)
> On 8 Jun 2020, at 23:48, Bill Somerville wrote:
>
> Mike,
>
> ho
to be a version issue.
If it’s the same it’s another kind of issue.
Benjamin – F4FPR
De : Tom Pickles
Envoyé : dimanche 7 juin 2020 23:42
À : WSJT software development
Objet : Re: [wsjt-devel] RE : FT-991A config problem
[cid:image001.png@01D63D27.51F46B80
it’s another kind of issue.
Benjamin – F4FPR
De : Tom Pickles
Envoyé : dimanche 7 juin 2020 23:42
À : WSJT software development
Objet : Re: [wsjt-devel] RE : FT-991A config problem
[cid:image001.png@01D63D27.51F46B80]
From: Bensay 1 mailto:bensam
[cid:be12eb32-aebc-4434-b2b5-0781f2ec8105]
From: Bensay 1
Sent: Sunday, June 7, 2020 4:37 PM
To: WSJT software development
Subject: [wsjt-devel] RE : FT-991A config problem
Dear Tom,
My FT-991 works fine with the 2.2.1 version.
Whats the error message
WSJT-X Ver 2.2.1 claimed to have fixed the config problem for the FT-991A.
Downloaded it and still have the same problem. Now I can't find the old
version that worked.
Tom W2PIX
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https
documenting it - if there
was a visible list could check.
Would rather not do the work and get a response ‘ Yes known defect - fixed in
next rc’ after spending time on it :-)
Regards
Tom
--
73
Tom
GM8MJV (IO85)
___
wsjt-devel mailing list
wsjt-devel
Please disregard previous bug report
Turns out I had a wonky USB hub. I think the error handling must be a bit
more robust in the windows version, because the windows version in a
virtual box on my Mac gave me no problems at all. Running the native
version resulted in the original issues
lem with FLDIGI and was unsuccessful.
I've actually had this problem happen a few years ago on
a different MacBook so it does not seem to be new, just worse for me than
before.
I'll try running it in a windows virtual box to rule out any hardware
problems.
Tom
kj4
This was asked over on the main WSJT mailing list just recently, there may be
more details on that thread.
https://groups.io/g/WSJTX/message/6596
--
73’s
Tom
GM8MJV (IO85)
On 23 Feb 2020, at 12:35, Trevor Smithers wrote:
> Back last August/September there was a brief post about a
Jari
What version of wsjt-X?, what were you doing at the time? - ft8 / ft4?
Will need a little more info rather than just the generic windows error.
Any wsjt error messages?
Tom
--
73’s
Tom
GM8MJV (IO85)
On 7 Jan 2020, at 20:11, Jari A wrote:
> Problem signature:
> Problem
OK. Thanks a lot for the clarification, Bill. And by the way, thank you for
your excellent support. Let me extend my wishes for a peaceful and merry
Christmas to you and the rest of the development team!
Tom OH6VDA
> 26. des. 2019 kl. 15:05 skrev Bill Somerville :
>
> On 25/12/2
Does WSJT-X support Omnirig 2.0?
Tom OH6VDA
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
o offset
to be between 1500Hz and 2500Hz to ensure your outsignal is in your
transmitter's "sweet spot".
I usually call CQ JA or CQ 908. It seems to work OK.
73 Tom OH6VDA / JW6VDA
> 23. des. 2019 kl. 12:53 skrev Bill Somerville :
>
> On 23/12/2019 10:37, Claude Frant
not solve the problem. Using
"Rig split" did, except for one thing: If the VFO B mode was anything other
than USB, the mode was not changed when going to Tx. I had to change that to
USB manually. But then it was problem solved.
Tom OH6VDA
> 19. des. 2019 kl. 12:55 skrev Claude Frantz :
&g
on to sent RR73 etc. and log the contact - it was not
complete - so stations had to call again. If there was yet another option to
remember to switch off/on and both ends needing to recognise the need if one
was ‘hidden’
Nope sorry leave it up to the operator.
Tom
P.S. I could see on a QUIET band
Fred, I see no bitching here, just friendy questions and mostly very polite
answers.
73 de Tom OH6VDA (occasionally semi-rare JW6VDA)
Sendt fra min iPad Air 2
> 20. nov. 2019 kl. 13:34 skrev Fred Price :
>
>
> Ya know if you so much want this why not open your computer a
frequencies in use I really do need
to see that easily at a glance.
See attached if it made it through
--
73’s
Tom
GM8MJV (IO85)
On 20 Nov 2019, at 00:25, David Gilbert wrote:
>
> If anyone was seriously concerned about real estate usage in the WSJT-X user
> window there wouldn
Hello Joe, thanks for the info. Awaiting 2.1.1 then!
73 de Tom, sporadically JW6VDA
Sendt fra min iPhone
> 18. nov. 2019 kl. 19:18 skrev Joe Taylor :
>
> Hi Grant and all,
>
> Thanks for reporting the bug in WSJT-X v2.1.0 that causes *Tx Enable* to be
> turned off when F
Isn't the need for tracking which operator is on in a multiop stuation covered
by "OPERATOR"?
73 de Tom OH6VDA
> 18. nov. 2019 kl. 14:43 skrev runninge...@gmail.com:
>
> Is there any interest for adding a new "My rig" (+ retain tickbox) in the
> Log QSO pan
of one TX cycle to the next are
not hard to fill with chores.
73 de Tom - from time to time JW6VDA
Sendt fra min iPad Air 2
> 18. nov. 2019 kl. 12:48 skrev Frode Igland :
>
>
> As I read Rich's message in digest format, a response may already be given,
> so my apologie
For what it’s worth: I support Grant’s request, specially regarding the
required need to hit “enable tx” almost constantly.
Tom JW6VDA
Sendt fra min iPhone
> 17. nov. 2019 kl. 06:30 skrev Grant VK5GR :
>
> Folks,
>
> Having returned home a few weeks ago from condu
to the existing site. That would really help open the dataset up to
deeper real-time analysis, which is extremely valuable data for the amateur
radio community.
Tom M0LTE
On Tue, 15 Oct 2019 at 04:42, Eric NO3M wrote:
> Onno
>
> My frustration is specifically with the seeming unwi
I believe this is intentional and is mentioned in point 11 under the "detailed
instructions for hounds" in this document:
https://physics.princeton.edu/pulsar/k1jt/FT8_DXpedition_Mode.pdf
73 de Tom OH6VDA
> 8. okt. 2019 kl. 08:45 skrev K2DBK-WSJT :
>
>
> I’ve no
s been pointed out it’s payload size - suspect will have to wait till the
next major release FT9? (or FT10, FT11 ….)
It’s not a simple task even if limited to USA.
Tom
73’s
Tom
GM8MJV (IO85)
On 26 Sep 2019, at 01:12, Bill Frantz wrote:
> On 9/25/19 at 3:52 PM, g4...@classdesign.com (B
, will be
looking at the global picture.
Tom
--
73’s
Tom
GM8MJV (IO85)
On 25 Sep 2019, at 22:19, Ron WV4P wrote:
> As a coordinator for the Tennessee QSO Party we fielded the same questions
> and had to respond the same. MANY wanted to use FT-X Modes. In kind, I don't
> think TN would be
file may provide pointers you
can report to the team that may help.
Regards
Tom
--
73’s
Tom
GM8MJV (IO85)
On 28 Aug 2019, at 15:48, akirby03...@hotmail.com wrote:
> I assume that the development team uses some bug tracking package. Is this
> correct?
>
> If so, was th
Christopher, is it really a good idea to resend your acceptance mail containing
both your username and password to the whole list? This post certainly was
accepted and re-sent!
73 de Tom OH6VDA
Sendt fra min iPad Air 2
> 19. aug. 2019 kl. 02:55 skrev Christopher Diederich via wsjt-de
Which logger can I use for this contest? I far as I can see, N1MM+does not
support it.
If running only with WSJT-X 2.1.0, which options should I choose on the
"Special operating activity" tab?
Tom OH6VDA
> 2. aug. 2019 kl. 20:16 skrev Ed Muns, W0YK :
>
> Two one-hour
Tnx, Kari!
73 de Tom OH6VDA
> 6. aug. 2019 kl. 12:58 skrev Kari :
>
>> On 6.8.2019 12.19, Tom Ramberg via wsjt-devel wrote:
>> I have wondered about the same, and I cannot find any "Rx all freqs"
>> anywhere in the settings. Please point me in the right direc
I have wondered about the same, and I cannot find any "Rx all freqs" anywhere
in the settings. Please point me in the right direction.
73 de Tom OH6VDA
> 6. aug. 2019 kl. 08:26 skrev Bill Richter :
>
> Is it new or did it just get unchecked during an update? I know it wa
For what it's worth, at OH2K club station we use Signalink, FT1000MP (I realise
it's a different rig) and Windows 7 64 bit, and have had no problem with F/H.
This isn't very helpful, I suppose.
OH6VDA Tom
> 21. jul. 2019 kl. 20:32 skrev Robert Anthony :
>
> Anyone using the above an
That's the WIN32 version.
73 de Tom OH6VDA
Sendt fra min iPad Air 2
> 18. jul. 2019 kl. 10:15 skrev Maurizio Brameri
> :
>
> I have found this link: https://slproweb.com/products/Win32OpenSSL.html
>
> Bye,
>
> Maurizio
>
>
>
> Il 18/07/2019 08:38, T
Could you please provide a link to the installation file of
WIN64_OpenSSL_1.1.0k_Light?
73 de OH6VDA Tom
Sendt fra min iPad Air 2
> 18. jul. 2019 kl. 01:39 skrev Bill Somerville :
>
> Hi,
>
> you may get an SSL/TLS network error when fetching a fresh LoTW users
> database
I actually decoded you yesterday, Vincent.
De OH6VDA @ OH2K.
Sendt fra min iPhone
> 11. jul. 2019 kl. 00:47 skrev Black Michael via wsjt-devel
> :
>
> Just an example...used my own grid.
> It's in Illinois
>
> de Mike W9MDB
>
>
>
>
> On Wednesday, July 10, 2019, 04:44:54 PM CDT, Topher
All
This posting by Fred gets my vote - easy, fool proof and does not distract the
dev team.
--
73’s
Tom
GM8MJV (IO85)
On 24 Jun 2019, at 09:27, Fred Price wrote:
> You are all overthinking the problem. There are programs to set your computer
> clock by a GPS dongle. A goo
This happens to me from time to time.
On Sat, 15 Jun 2019 at 22:43, Steve Masticola via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Program version: 2.0.1 7ddcb7
>
> Operating system: Windows 10, ver. 1809 (OS Build 17763.503)
>
> Description: After sitting idle with Monitor on for
How is this any more complicated than set rig TX power to 100%, connect a
dummy load, then reduce audio drive level so power meter reads less than
100% in the middle of the passband?
Tom M0LTE
On Fri, 14 Jun 2019 at 07:39, Roeland Jansen
wrote:
> "However, the action of ALC meter
was 48kHz 16-bit
before, and of course it was not. Thanks a lot!
73 de Tom OH6VDA
Sendt fra min iPad Air 2
> 5. jun. 2019 kl. 15:49 skrev Black Michael via wsjt-devel
> :
>
> The link below is an article a couple of us wrote which has helped a lot of
> people understand and
Sorry for posting this in the wrong thread. Now Trying to delete it and repost-
OH6VDA Tom
Sendt fra min iPad Air 2
> 5. jun. 2019 kl. 22:26 skrev Tom Ramberg :
>
> I just checked my computer soundcard settings and followed your procedure to
> set up the radio, the computer and th
was 48kHz 16-bit
before, and of course it was not. Thanks a lot!
73 de Tom OH6VDA
Sendt fra min iPad Air 2
> 5. jun. 2019 kl. 15:01 skrev Black Michael via wsjt-devel
> :
>
> For the IC-7300 you want the ALC meter to show no action at all. So if it
> ever bumps up at all you'
the program to send RR73,
because every time YO6FPW sent his report, the programme jumped back to sending
my report. I enclose the relevant part of ALL.TXT below.
73 de Tom OH6VDA
Sendt fra min iPad Air 2
190604_19170014.080 Tx FT4 0 0.0 1140 CQ RU OH2K KP20
That did the trick. Thanks!
Made 20 qsos this morning mostly on 20. No problems encountered so far. Kudos
to the developers!
73 de Tom OH6VDA @ OH2K club station
Sendt fra min iPhone
> 4. jun. 2019 kl. 11:31 skrev DG2YCB, Uwe :
>
> Hi Tom,
>
> I had the same issue here
I’ve installed the WIN64OpenSSL_Light-1_0_2s, but the the lotw user activity
file won’t load. Se error message
73 de Tom OH6VDA
Sendt fra min iPhone___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists
Hi
Thanks for update - much appreciated.
Tom
--
73’s
Tom
GM8MJV (IO85)
On 3 Jun 2019, at 16:33, Joe Taylor wrote:
> Hi Tom,
>
> There are no plans to support JT6m or FSK441 (which I assume you meant) in
> WSJT-X. These modes are deprecated because they have bee
Clicking on the download link for RC5 produces this reactio (Similar for both
32- and 64-bits versions):
Not Found
The requested URL /pulsar/K1JT/wsjtx-2.1.0-rc6-win64.exe was not found on this
server.
ADDRESS:
Apache/2.2.15 (Scientific Linux) Server at physics.princeton.edu Port 80
Hi Dev Team
WSJT supports JT6m and FSK144 while WSJT-X does not. There are a few people
who, depending on mode / activity, still use those modes.
Can anyone tell me if adding those ‘older’ modes into WSJT-X is on the to-do
list or will we still need to use V10 of WSJT?
Thanks
Tom
--
73’s
Hi Bill.
I never got another response from you, but FYI here's what we've been able to
find out:1. I cannot find any crash reports or anything in the Windows Event
Log.2. I uninstalled 2.0.1, and after that we've had no more crashes.
73 de Tom OH6VDA,
Asemanvalvoja (Station Manager) @ OH2K
ption.
De Tom OH6VDA
Tom Ramberg
Lallukankuja 3 B 40
00920 Helsinki
Finland
Mobile phone +358 40 6686922
Sendt fra min iPad Air 2
> 9. mai 2019 kl. 12:52 skrev Bill Somerville :
>
>> On 09/05/2019 07:13, Tom Ramberg via wsjt-devel wrote:
>> I have experienced several crash
g on going to the clubstation again tomorrow morning (that's 0500
UTC), and I might experiment with un-/reinstall then if that is a viable option.
De Tom OH6VDA
Sendt fra min iPad Air 2
> 9. mai 2019 kl. 17:42 skrev Bill Somerville :
>
>> On 09/05/2019 15:38, Al Pawlowski wrote:
reported similar problems?
de Tom OH6VDA, operating OH2K, Raido club of Kauniainen (KRK)
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Hi OMOne of the main Mac maintainer’s lives in the UK - it is 4:30am here just now, you posting 4 hours ago - just after midnight local time.It can take a while for some posts to be answered, the Dev team are all volunteers and do need sleep :-)By the way have you checked the ‘Known Issues’
Bill, in nature yellow/black are warning colours, like on wasps and bumblebees,
and emergency vehicles around the world use "neon type" "green" and "orange".
Could that be an idea?
73 de Tom OH6VDA
Sendt fra min iPad Air 2
> 30. apr. 2019 kl. 16:17 skrev Bill
As for colour blindness, red and green are the absolute worst alternatives for
us that are affected. (10% of male population).
73 de Tom OH6VDA
Sendt fra min iPad Air 2
> 30. apr. 2019 kl. 14:07 skrev Sergio Yes UT9LI :
>
> Hi! Dear ...!!!
>
> dr Bill! When writing a
Tnx Jari. I just thought 7047 was suspiciously quiet :)
De OH6VDA @ OH2K
Tom
Sendt fra min iPhone
> 30. apr. 2019 kl. 12:24 skrev Jari A :
>
> In summary WSJT-X v2.1.0 RC5 will have the following FT4 suggested
> frequencies (the Iter1 column):
>
> Band Ite
I just finished one contact on 20 meter. Now checking 40. What is the frequency
for 40 meters?
De OH6DA & OH2K Tom
Sendt fra min iPhone
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/
region/country contest requests hitting the reflector.
Tom
--
73’s
Tom
GM8MJV (IO85)
On 22 Apr 2019, at 16:34, Joe Taylor wrote:
> To: WSJT-X users interested in testing FT4
> From: K1JT, K9AN, and G4WJS
>
> Soon after the "FT8 Roundup" held on December 1-2, 2018, we s
1 - 100 of 188 matches
Mail list logo
