CVSROOT:/home/x-cvs
Module name:xc
Changes by: [EMAIL PROTECTED] 03/08/03 21:22:13
Log message:
Prepare to remove the xc/programs/xkbcomp/geometry/HP directory from
the CVS repository.
Modified files:
xc/programs/Xserver/hw/xfree86/:
CHANGELOG xf86Date.h
Mathieu Lacage writes:
hi,
I eventually got over my previous AddInputHandler puzzling and kept on
reading code until I finished the included rough outline of useful
code paths in the XServer.
I've extended the article about AddInputHandler() have you read it?
I am planning to
I'm willing to poke around with the stuff, but I lack docs concerning
the chipset. As for the obvious things, I did patch Ben's kernel driver
to work with my setup, but the radeon driver in X is far more confusing
without documentation. I'll see what I can find out ... I would be
grateful for
SZ KALMAMAK N
SZLERE SALANMASI N
TRKYE?NN KAMPANYASI?NA KATIL!
--
YERL KALTEY AL!
yatrmlar oalsn
SZLK AZALSIN!
YABANCI MALI ALMA! SZ KALMA!
1 milyon 200 bin iyeri kapand,
9 milyon meslek sahibi insanmz isiz kald!
Bugn lkemizde sanayide ve i hayatnda
-i
All new online Medical Superstore!
No Prescription Needed, Largest Selection Online
*We ship Internationaly as well. Best prices guaranteed.
Click Here -- http://www.pharmacyworldwide.biz/pharm
Be removed from our medical lists:
http://www.pharmacyworldwide.biz/a.html
me
Stephen West-Fisher writes:
I'm upgrading an old laptop to FreeBSD 4.8 and having a hard time
configuring XFree86 4.3.0. The configuration I'm using has always worked
in the past, for 3.3.7 and 4.1.0. It appears that FixPanelSize is being
ignored. In the log it shows that display size
Hi,
XFree86 4.3.x detects the card (chip id 0x5961, see log)
and even the DFP on the primary port, but a signal is only
produced on the (not connected) secondary VGA port.
The hardware is working (tested with windows).
I'm using a newer driver version (4.3.99) with explicit
support for the
Hi
We are having problem in Display
System Configuration
Processor - P IV processor 1.7GHz
Monitor - Samsung Samtron 56V
I request u to kindly send the solution
as soon as possible
___
Download the hottest happening ringtones here!
OR SMS: Top
Basically Im getting a error in the
/var/log file telling me due to a hardware bug? here is the error Im getting. If
anything canI define it by hand or would this be futile since X probally
wont know the memory addresses. Its a 16meg Millenium II
card.
(WW) MGA(0): Unable to probe memory
I would look to see of the Appple monitor is
looking for abnormal horz. and vert. sync. ? also post your /var/log file
for X that will help alot to get replies. I sense the problem is somewhere
in scanlines and your sync isnt set right. obviously the server is up... you use
ctrl/atl/b.s. to
Ar an 1ú lá de mí 8, scríobh George Georgalis :
How do I disable tcp/6000 connections?
No-one else seems to have mentioned this, so I'll address it; pass the
server the options -nolisten tcp on the command line.
--
These are the prettiest looking witnesses we have had in a long time. I
Title: Xfree86_3.3.6 vs. 4.3.0 to get s3-module
Hello everybody,
I´m a newby so forgive me if I ask stupid questions.
I have debian woody with xfree86 version 4.1.0 and S3 Trio V64+ graphic card (765 Chip) on a Pentium I Board. Unfortunately, version 4.1.0 only supports savage and virge,
I´m a newby so forgive me if I ask stupid questions.
stupid questions are hard to forgive, but questions stemming from a
lack of knowlege are not a problem. I don't see any stupid questions :-)
I have debian woody with xfree86 version 4.1.0 and S3 Trio V64+ graphic
card (765 Chip) on a Pentium
This is an autoresponder. I'll never see your message.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
Hi,
I am a newbie trying to make the transition from Windows to Linux. I
have installed Mandrake 9.1, and I have performed all of the available
package updates.
I am not completely comfortable with using command line terminal yet, so
I am still stuck in GUI mode. I am trying to get
I was shutting down the comp because a thunder storm was a'coming.(Redhat 9.0
with newest version of XFree86, I think. Up until 6 weeks ago I performed all
updates per RHN.) After I clicked the log out button, and before the GUI log
in screen came up, it crashed. Ctrl-alt-delete to restart and
What file system are you using? Have you run fsck on all your partitions?
Jesse
On Sun, 3 Aug 2003, jmw34 wrote:
I was shutting down the comp because a thunder storm was a'coming.(Redhat 9.0
with newest version of XFree86, I think. Up until 6 weeks ago I performed all
updates per RHN.)
try looking at your partitions and make sure all of them are mounted sounds
like /var isnt getting mounted
- Original Message -
From: jmw34 [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, August 03, 2003 3:11 PM
Subject: [XFree86] x wont start
I was shutting down the comp because
There is a VideoRam option for the Section Device of the
XF86Config file. Eg:
VideoRam 16384
See the man page on XF86Config.
MArk.
On Sun, 3 Aug 2003, Sycholic wrote:
Basically Im getting a error in the /var/log file telling me due to a hardware bug?
here is
XFree86 4.3.x detects the card (chip id 0x5961, see log)
and even the DFP on the primary port, but a signal is only
produced on the (not connected) secondary VGA port.
The hardware is working (tested with windows).
I'm using a newer driver version (4.3.99) with explicit
support for the card
I am having exactly this problem with a Radeon 7500 card (OEM =
PowerColor) -- as an added complication it appears to be vary with the
digital monitor attached.
I can get output from XFree to the DVI port when a (borrowed) Sony XDM-72
monitor is attached, but not when my Apple Studio Display 17
Hey, I am new here and I don't know where to put this question. I have an older computer with an ATI Mach(264vt2) graphics card, and the system is running Windows 95. Will these drivers work with this card and operating system? Or are these drivers only for Linux systems? Thank you for any help
THe horiz sync and vert refresh rates are being
detected by DDC and I have put them explicitly in the config -- with no effect.
In response to another suggestion, I also
downloaded the CVS drivers dated last thursday-- again without
effect.
There is an interesting post this weekend by
THe horiz sync and vert refresh rates are being
detected by DDC and I have put them explicitly in the config -- with no effect.
In response to another suggestion, I also
downloaded the CVS drivers dated last thursday-- again without
effect.
There is an interesting post this weekend by
Are these drivers compatible with my card and Windows 95? Or is this just for Linux users? If it is only for Linux, does anyone know where I can get drivers updated beyond ATI's abysmal support for their graphic cards?
I'm new here too. I believe (according to old docs) I'm running the
exact same vid card attached to my old HP Pavillion (trying to test linux).
Running Mandrake 9.1 and XFree 4.3, I've had no luck getting the x
server to start (ERROR: Screens found but no usable config to use...).
So my first
When starting up my X server for the first time
after installing RedHat 9.0, I get the following error messages, as per the
attached XFree86.0.log file.
Claudiu Spataru
XFree86.0.log
Description: Binary data
On Sunday 03 August 2003 09:43 pm, Claudiu Spataru wrote:
When starting up my X server for the first time after installing RedHat
9.0, I get the following error messages, as per the attached XFree86.0.log
file.
Claudiu Spataru
Off hand I would say XFS is not running. Open a terminal and
You'll need to send your /var/log/XFree86.0.log file so that we can try to
figure out what's wrong.
Jesse
On Sun, 3 Aug 2003, Kevin wrote:
I'm new here too. I believe (according to old docs) I'm running the
exact same vid card attached to my old HP Pavillion (trying to test linux).
Running
Dear Sirs:
I keep getting about 50 to 60 e-mails a day from
people who have problems with setting up XFree on
their machines.
I signed up for your newsletter, some how these
e-mails are being directed to me.
If this continues I will have to block your site
on my e-mail.
Thank you
Andrew, I think everyone gets a copy of these Emails. I just signed up too. I think it shotguns the emails to everyone signed up as sort of a network effect to see if anyone has figured out the problems. I guess this way members help each other. It sounds really cool, and should make for fantastic
I keep getting about 50 to 60 e-mails a day from
people who have problems with setting up XFree on
their machines.
I presume you joined the [EMAIL PROTECTED] mailing list?
I signed up for your newsletter, some how these
e-mails are being directed to me.
It's a mailing list. Whenever
32 matches
Mail list logo