Tomasz Radziszewski <[EMAIL PROTECTED]> wrote: > It's probably about an unused vatiable. I had this error in sipp 3.1 when I > extracted something with ereg, but never used the variable. It is strange, > because it should rather say that it's referenced 0 times. > > The error goes away if you use every extracted variable somewhere in the > scenario.
Indeed this was the case. Thanks for the answer! > And last but not least - do you really have "SIP/2.0" in Contact header? In > one of my tests, it looks as follows Copy-paste error. :-/ True, contact header should not have that string. Thanks for this one also. :-) Regards, Sajith. -- "the lyf so short, the craft so long to lerne." -- Chaucer. ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Sipp-users mailing list Sipp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/sipp-users