That worked. Thanks. Mohamed
On Tue, Dec 4, 2018 at 5:30 PM Oleg <support-list@support.elphel.com> wrote: > Wrong file. My bad. Try this one. > > On Tue, Dec 4, 2018 at 3:17 PM Morsy, Mohamed K <mk...@pitt.edu> wrote: > >> Hi Oleg, >> >> >> I tried replacing the devicetree.dtb file in the nand folder from >> elphel393_20180511 >> with the one you sent. I tried the ipaddress/update_software.html tool >> again but nothing changed. When I log into the elphel from minicom and try >> ifconfig I still only get the local address at 127.0.0.1. This is on a Rev >> C board. Do you have any other ideas? >> >> >> Also I meant to send the previous email from my Redzone email so I'll CC >> myself to this chain. >> >> >> Thanks, >> >> >> Mohamed Morsy >> >> >> ------------------------------ >> *From:* Oleg <support-list@support.elphel.com> >> *Sent:* Tuesday, December 4, 2018 2:51 PM >> *To:* Morsy, Mohamed K >> *Cc:* elphel support-list >> *Subject:* Re: [Elphel-support] Elphel 393 Nand upgrade >> >> Hi Mohamed, >> >> I think it's not related. >> >> Most likely you need an updated device tree (devicetree.dtb). The newest >> boards are revC - they have a different PHY reg address compared to revB >> (and older). The recovery cards came with updated devicetree - and so, the >> network is working. >> The revision letter is printed near the network connector on top of the >> board. For revC - try devicetree.dtb from the attachment. >> >> fix_net_config.tar.gz - just moves network configuration from >> /etc/elphel393/init_elphel393.py to /etc/network/interfaces which is a more >> conventional place for linux. And it will be included in the next release. >> >> I'm having trouble upgrading the NAND memory on an elphel 393. I've tried >> it with multiple boards. I used the ipaddress/update_software.html tool. >> When I flash the board, I shut it down, remove the uSD card, and reboot it. >> But it doesn't boot up correctly. I'm able to log in on minicom but when I >> try ifconfig I find that the board doesn't have an ip address. Do you know >> how to resolve this issue? I noticed there's a recent upload at >> community.elphel.com/files/393 >> <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fcommunity.elphel.com%2Ffiles%2F393&data=02%7C01%7CMKM89%40pitt.edu%7C69e9fd539853460af0b808d65a21ddbc%7C9ef9f489e0a04eeb87cc3a526112fd0d%7C1%7C1%7C636795498844445600&sdata=nmNC%2B4fi8iv%2FKJk2i5mVpAEVZ4r1A5H%2FCS3woLV3%2Bhc%3D&reserved=0> >> called fix_net_config.tar.gz. Is that related to my issue? >> >> Thanks, >> Mohamed Morsy >> RedZone Robotics >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> <https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fsupport.elphel.com%2Fmailman%2Flistinfo%2Fsupport-list_support.elphel.com&data=02%7C01%7CMKM89%40pitt.edu%7C69e9fd539853460af0b808d65a21ddbc%7C9ef9f489e0a04eeb87cc3a526112fd0d%7C1%7C1%7C636795498844455609&sdata=6WuAVJxImp03qJEMvMDpWa%2BCth%2BT%2B3t1bkmiWJ07tGE%3D&reserved=0> >> >> >> _______________________________________________ >> Support-list mailing list >> Support-list@support.elphel.com >> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com >> > > Best regards, > Oleg Dzhimiev > Electronics Engineer > phone: +1 801 783 5555 x124 > Elphel, Inc. >
_______________________________________________ Support-list mailing list Support-list@support.elphel.com http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com