No video is bad. That is why I advised drastic actions such as taking 
everything apart. If you tested with only the Motherboard, CPU, RAM and 
video card, try re-seating the RAM and video card. Also test your video 
card in your son's computer.

Note - The disconnection and removal of the other components is to 
eliminate them as interference. Something may be touching the wrong part.

Fly......

pekoe4849 wrote:
>
> Hi Dragonfly,
>
> Last night I put everything back the way it was, since it was working
> in the shop when I left. I took the box to my son's house. First, even
> though I didn't think it would work, I plugged into his monitor with
> my box. No go. So I borrowed his video card out of his machine and
> just plugged my box in with only the power and monitor. Just got a
> black screen. So much for that. I thought I'd just rule out the video
> card being bad. I don't know if it was a very good test though because
> even though I seated his video card as far as it would go, it just
> didn't reach the screw hole very well, so I left it unscrewed just to
> test it.
>
> I did get my Win98 installation disk back from him though, so I can
> now prove to the XP installation that I had one. That's why I didn't
> install a fresh XP to begin with.
>
> No, I don't need three drives. One is bad, that's why I bought a new
> one. I didn't know until I talked to the tech at the shop which drive
> was bad. At one point I got a "serious hard drive error on C"
> (probably not exact words). XP is installed on D, so...? The tech
> said it would be the drive my OS is installed on. Is that right? I
> hope so, because it's going bye bye anyway--it's the smallest drive.
>
> You told me what to do if I get video, but what do I do if I don't?
> Give up and take it in? Or.....
>
> I bought a stick of dyanamite just in case. :D
>
> Diane
>
> --- In [email protected] 
> <mailto:A-1-Computer_Tech%40yahoogroups.com>, Dragonfly <[EMAIL PROTECTED]>
> wrote:
> >
> > Wow. I have been there and been truely frustrated.
> >
> > It is a good thing you have it apart because now you can do things
> the
> > right way.
> >
> > When I don't get video, I remove all interface cards and disconnect
> all
> > attached drives, cables..etc. Minimum boot requirements are video
> card,
> > RAM, motherboard and power cord. You can add a keyboard but you
> really
> > don't need it to test for video. Plug in the monitor and reboot.
> >
> > If you get video, power down and prepare to connect your drives.
> Make
> > sure the drive you intend to be C: is set to master and put it on
> IDE
> > channel 0. You want this to be your boot device. Put a slave drive
> on
> > the same cable. ( Is it worth booting to the bios to make sure that
> it
> > is the first channel? ) Go ahead and set up the CD and other drive.
> Do
> > you need all three drives?
> >
> > Make sure all components are connected. Boot from your Windows CD
> and
> > install your new operating system.
> >
> > Fly......
> >
> > pekoe4849 wrote:
> > >
> > > Jim,
>



If you have any questions or problems with any aspect of this site, please feel 
free to contact me directly [EMAIL PROTECTED] Please do not post personal 
issues directly to the group.

To unsubscribe from this list, send an email to [EMAIL PROTECTED]

Thank you for using A-1 Computer Tech 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/A-1-Computer_Tech/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/A-1-Computer_Tech/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[EMAIL PROTECTED] 
    mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

Reply via email to