Galvanizing spray paint may not have a good faraday effect due to the small 
zinc particle size and the lack of electrical connection between particles.  
Just a guess.  I would think foil tape would tell you for certain.  

But the paint may have been just as good.  Never really tested it for that.  I 
know that eventually the vehicle somehow weathers or evaporates away and allows 
the zinc to do the proper electrochemistry when applied to steel. 

From: Jeremy 
Sent: Friday, July 27, 2018 10:55 AM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] RF Armor for a CPE

I have masked the front and painted the backs with galvanizing spray paint, but 
the difference was not really very noticeable.  I debated trying foil tape, but 
just gave up frequency reuse on that old UBNT gear.

On Fri, Jul 27, 2018 at 10:47 AM, <[email protected]> wrote:

  I would have cost them just a penny or two to have coated the inside of the 
enclosure with aluminum deposition or nickel paint (or arc spray zinc) to have 
eliminated much of that.  

  I wonder what the difference would be to put foil on everything but the area 
in the front where the antenna is...

  From: Jeremy 
  Sent: Friday, July 27, 2018 10:43 AM
  To: AnimalFarm Microwave Users Group 
  Subject: Re: [AFMUG] RF Armor for a CPE

  ....so it dropped from hearing at a -30 to a -36.  Still too hot for them to 
both be on-channel obviously, since they put out so much noise out the back.  
Obviously a directional antenna like a Powerbeam will be different.

  On Fri, Jul 27, 2018 at 10:41 AM, Jeremy <[email protected]> wrote:

    In my experience testing RF armor on a two Nanostations facing opposite 
directions, ten feet apart from each other, each rf armor lowered the noise 
level by 3db.  So both of them lowered the level that they could hear each 
other by 6db.

    On Fri, Jul 27, 2018 at 9:26 AM, Jay Weekley <[email protected]> 
wrote:

      How effective is RF Armor in reducing interference being received by an 
SM?  Obviously it depends on which direction it's coming from .

      -- 
      Jay Weekley 
      Cyber Broadband 


      -- 
      AF mailing list
      [email protected]
      http://af.afmug.com/mailman/listinfo/af_af.afmug.com





------------------------------------------------------------------------------
  -- 
  AF mailing list
  [email protected]
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com


  -- 
  AF mailing list
  [email protected]
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com





--------------------------------------------------------------------------------
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to