I have seen a person (not me) zip tie a cooking pot to the rear of a
nanobridge, in addition to the rfarmor kit, to cut down on noise from the
back side. It worked.


On Fri, Jul 27, 2018 at 9:55 AM, Jeremy <[email protected]> wrote:

> I have masked the front and painted the backs with galvanizing spray
> paint, but the difference was not really very noticeable.  I debated trying
> foil tape, but just gave up frequency reuse on that old UBNT gear.
>
> On Fri, Jul 27, 2018 at 10:47 AM, <[email protected]> wrote:
>
>> I would have cost them just a penny or two to have coated the inside of
>> the enclosure with aluminum deposition or nickel paint (or arc spray zinc)
>> to have eliminated much of that.
>>
>> I wonder what the difference would be to put foil on everything but the
>> area in the front where the antenna is...
>>
>> *From:* Jeremy
>> *Sent:* Friday, July 27, 2018 10:43 AM
>> *To:* AnimalFarm Microwave Users Group
>> *Subject:* Re: [AFMUG] RF Armor for a CPE
>>
>> ....so it dropped from hearing at a -30 to a -36.  Still too hot for them
>> to both be on-channel obviously, since they put out so much noise out the
>> back.  Obviously a directional antenna like a Powerbeam will be different.
>>
>> On Fri, Jul 27, 2018 at 10:41 AM, Jeremy <[email protected]> wrote:
>>
>>> In my experience testing RF armor on a two Nanostations facing opposite
>>> directions, ten feet apart from each other, each rf armor lowered the noise
>>> level by 3db.  So both of them lowered the level that they could hear each
>>> other by 6db.
>>>
>>> On Fri, Jul 27, 2018 at 9:26 AM, Jay Weekley <[email protected]>
>>> wrote:
>>>
>>>> How effective is RF Armor in reducing interference being received by an
>>>> SM?  Obviously it depends on which direction it's coming from .
>>>> --
>>>> *Jay Weekley*
>>>>
>>>> *Cyber Broadband *
>>>>
>>>> --
>>>> AF mailing list
>>>> [email protected]
>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>
>>>>
>>>
>>
>>
>> ------------------------------
>> --
>> AF mailing list
>> [email protected]
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>>
>> --
>> AF mailing list
>> [email protected]
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>>
>
> --
> AF mailing list
> [email protected]
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
-- 
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Reply via email to