You only need 24v going to site monitor. It just is the controller for the Sync Injector or the Power Injector You can have mixed voltages going to the Power/Sync injector - you just need to pin it out so that the port knows which power input to pass through from.
Dave On Mon, Jul 15, 2019 at 1:41 PM Sam Lambie <[email protected]> wrote: > I thought that the site monitors were good up to 30vdc on older models. > The newer ones should be good to 56vdc. > > On Mon, Jul 15, 2019 at 11:27 AM Jason McKemie < > [email protected]> wrote: > >> Is it okay to have -48v and +24v going into the same site monitor? >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
