Volt meter inputs are isolated. I don't recall if the base unit has one
or if you have to buy the volt meter module.
-Adam
On 7/15/2019 1:47 PM, Jason McKemie wrote:
I suspected something like this, it would just be nice to be able to
monitor both power sources.
On Mon, Jul 15, 2019 at 12:46 PM Adam Moffett <[email protected]
<mailto:[email protected]>> wrote:
I don't think any Packetflux stuff does -48v because they have
negative tied to ground on the circuit board. I think you'll get
sparks if you do that.
I think it would be a bad idea with any device. You'd have to be
sure that the inputs are strongly isolated from each other. Don't
cross the streams Dr. Vankman.
On 7/15/2019 1:27 PM, Jason McKemie wrote:
Is it okay to have -48v and +24v going into the same site monitor?
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
