The base has a common ground, so no you cannot do that as proposed. On Mon, Jul 15, 2019 at 10:50 AM Adam Moffett <[email protected]> wrote:
> Volt meter inputs are isolated. I don't recall if the base unit has one > or if you have to buy the volt meter module. > -Adam > > On 7/15/2019 1:47 PM, Jason McKemie wrote: > > I suspected something like this, it would just be nice to be able to > monitor both power sources. > > On Mon, Jul 15, 2019 at 12:46 PM Adam Moffett <[email protected]> wrote: > >> I don't think any Packetflux stuff does -48v because they have negative >> tied to ground on the circuit board. I think you'll get sparks if you do >> that. >> >> I think it would be a bad idea with any device. You'd have to be sure >> that the inputs are strongly isolated from each other. Don't cross the >> streams Dr. Vankman. >> >> >> On 7/15/2019 1:27 PM, Jason McKemie wrote: >> >> Is it okay to have -48v and +24v going into the same site monitor? >> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
