I use TSP 360-148 with TSP-BCM48, so I assume with the BCM48A you would use a TSP 600-148. Actually I would have to check the spec sheet to see if the power supply needs to be rated higher wattage than the BCM so it can power the loads while also recharging the batteries. But I think 600W may be as big as the TSP series goes.
Make sure you also have a temperature probe. They can be ordered separately but I think one comes with the BCM. -----Original Message----- From: AF <af-boun...@af.afmug.com> On Behalf Of Matt Sent: Monday, November 25, 2019 10:59 AM To: af@af.afmug.com Subject: Re: [AFMUG] 48 Volt Battery Revert TSP-BCM48(A). https://www.trcelectronics.com/View/TRACO-Power/TSP-BCM48.shtml So what is a good Traco PS to use with this at around 10 amps? On Thu, Nov 21, 2019 at 11:37 AM Matt <matt.mailingli...@gmail.com> wrote: > > We use Meanwell DIN mount stuff for battery revert. For 24 volt systems we use. > > DRP-240-24 - power supply > DR-UPS40 - battery revert > > I want to move to 48 volt battery banks now instead of up converting 24 to 48. > > So what is a version of DR-UPS40 that is DIN mount and supports 48 volt? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com