I think temperature compensation. BCM signals TSP to adjust voltage.
I assume the AC alarm comes through that link cable too.
On 11/22/2019 12:43 PM, Sterling Jacobson wrote:
What am I missing not using the TSP power supply and remote link?
*From:* AF <[email protected]> *On Behalf Of * Matt
*Sent:* Friday, November 22, 2019 9:30 AM
*To:* AnimalFarm Microwave Users Group <[email protected]>
*Subject:* Re: [AFMUG] 48 Volt Battery Revert
So what is the remote link for?
On Fri, Nov 22, 2019 at 7:56 AM Josh Baird <[email protected]
<mailto:[email protected]>> wrote:
So you're not taking advantage of one of the most compelling
reasons to use the TSP+BCM combo.
On Fri, Nov 22, 2019 at 8:51 AM Sterling Jacobson
<[email protected] <mailto:[email protected]>> wrote:
I don’t use the remote link, or the TSP PS units.
*From:* AF <[email protected]
<mailto:[email protected]>> *On Behalf Of *Ken Hohhof
*Sent:* Thursday, November 21, 2019 6:17 PM
*To:* 'AnimalFarm Microwave Users Group' <[email protected]
<mailto:[email protected]>>
*Subject:* Re: [AFMUG] 48 Volt Battery Revert
I wouldn’t think the Mean Well power supply would be
compatible with the remote link on the BCM.
https://www.tracopower.com/products/tsp-bcm.pdf
I think the TSP-BCMU360 can be fed from any brand of power
supply, but it’s a different animal probably best for smallish
batteries.
*From:* AF <[email protected]
<mailto:[email protected]>> *On Behalf Of *Sterling Jacobson
*Sent:* Thursday, November 21, 2019 5:56 PM
*To:* AnimalFarm Microwave Users Group <[email protected]
<mailto:[email protected]>>
*Subject:* Re: [AFMUG] 48 Volt Battery Revert
I use the TSP-BCM48(A).
https://www.trcelectronics.com/View/TRACO-Power/TSP-BCM48.shtml
Around $170
Takes a 48v input, so I use the Mean Well 48v 10A PSU for
about $100 to feed it.
And a string of four 12v 52AH batteries.
*From:* AF <[email protected]
<mailto:[email protected]>> *On Behalf Of *Jesse DuPont
*Sent:* Thursday, November 21, 2019 4:02 PM
*To:* AnimalFarm Microwave Users Group <[email protected]
<mailto:[email protected]>>; Matt <[email protected]
<mailto:[email protected]>>
*Subject:* Re: [AFMUG] 48 Volt Battery Revert
This one is for 48V. It's not Meanwell and it's expensive, but
it's functionally the same as the DR-UPS40, but for 48V. I
imagine Meanwell OEMs this for RLH.
https://www.fiberopticlink.com/product/48vdc-ups-battery-charge-controller-module/
*Jesse DuPont*
Network Architect
email: [email protected]
<mailto:[email protected]>
Celerity Networks LLC
Celerity Broadband LLC
Like us! facebook.com/celeritynetworksllc
<http://facebook.com/celeritynetworksllc>
Like us! facebook.com/celeritybroadband
<http://facebook.com/celeritybroadband>
On 11/21/19 10:37 AM, Matt wrote:
We use Meanwell DIN mount stuff for battery revert. For 24 volt
systems we use.
DRP-240-24 - power supply
DR-UPS40 - battery revert
I want to move to 48 volt battery banks now instead of up
converting 24 to 48.
So what is a version of DR-UPS40 that is DIN mount and supports 48
volt?
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected] <mailto:[email protected]>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
