Spec sheet says 3000L has an sfp. On Wed, Jan 22, 2020 at 4:24 PM Mathew Howard <[email protected]> wrote:
> The 3000 has an SFP, the 3000L does not. > > On Wed, Jan 22, 2020 at 5:54 PM Ryan Ray <[email protected]> wrote: > >> It’s got an sfp in it >> >> On Wed, Jan 22, 2020 at 1:57 PM Adam Moffett <[email protected]> wrote: >> >>> Copper. 3000L doesn't have fiber. >>> On 1/22/2020 4:55 PM, Nate Burke wrote: >>> >>> Are you seeing Ethernet problems with fiber connections as well, or just >>> the copper? We put up an EPMP 3000 early last year. It had Ethernet >>> problems for about the first 3 or 4 weeks of putting it up, but has seemed >>> fine since then. This was on Copper connection. I was just having >>> Ethernet problems in general, 1g, 100m, 10m. It would instantly negotiate >>> the speed, but have lots of packet loss. I attributed it to corrosion on >>> the Cat5 pins that summer temperature fluctuations cleared up. >>> >>> >>> On 1/22/2020 2:45 PM, Adam Moffett wrote: >>> >>> It was 1 link at 0.9 mile on a +30 EIRP DFS band. >>> >>> Just a test. Test failed. >>> >>> >>> On 1/22/2020 3:41 PM, Ryan Ray wrote: >>> >>> Technically you wouldn't see any performance gains over a 2000 unless >>> you're hitting 256qam. >>> >>> What's the distance of the links? >>> >>> On Wed, Jan 22, 2020 at 11:19 AM Matt Hoppes < >>> [email protected]> wrote: >>> >>>> No but Chris and I had a theory it was hot heat related... that kills >>>> that theory. >>>> >>>> On 1/22/20 1:17 PM, Adam Moffett wrote: >>>> > Binghamton, NY just north of you. Usually in the 30's this time of >>>> > year, but it's been more like in the teens for several days. >>>> > >>>> > Did you see a temperature correlation? >>>> > >>>> > >>>> > On 1/22/2020 12:49 PM, Matt Hoppes wrote: >>>> >> I purchased a bunch of ePMP3000 (not L) and have honestly had >>>> nothing >>>> >> but issues with them since trying to deploy... including multiple >>>> >> instances at multiple sites with the inability to get Gig to link... >>>> >> but at the office it's fine... swap to a Ubiquiti AC radio and it's >>>> a >>>> >> Gig on the tower. >>>> >> >>>> >> Out of curiosity what temperature are you at wherever you are right >>>> now? >>>> >> >>>> >> On 1/22/20 12:46 PM, Adam Moffett wrote: >>>> >>> On the first unit we tried yeah. GigE worked in the office, but on >>>> >>> the tower it would only run at 100BaseT. Our guys fought with it >>>> for >>>> >>> a couple of days. Brought it back to the office and it did a gig in >>>> >>> the office no problem. I assume it's related to the cable length, >>>> >>> but maybe some other factor matters. The switch at the tower was a >>>> >>> Mikrotik CRS 2xx of some type. Not sure if that matters. >>>> >>> >>>> >>> In any case, the second unit we plugged in at the tower went right >>>> to >>>> >>> a gig no problem.....except that one died today after being in the >>>> >>> air for 4 days. >>>> >>> >>>> >>> Maybe I just rolled snake eyes or something, but it has me >>>> wondering >>>> >>> about reliability. >>>> >>> >>>> >>> The price and feature set is right so I had big plans for these. I >>>> >>> probably won't try them again unless something changes. >>>> >>> >>>> >>> -Adam >>>> >>> >>>> >>> >>>> >>> On 1/22/2020 12:39 PM, Matt Hoppes wrote: >>>> >>>> WAIT WAIT WAIT.... You ALSO are having issues linking at Gigabit? >>>> >>>> That's interesting, because myself and someone else are also >>>> having >>>> >>>> this issue and Cambium has sworn until they are blue in the face >>>> >>>> there is no issue. >>>> >>>> >>>> >>>> On 1/22/20 11:54 AM, Adam Moffett wrote: >>>> >>>>> So I tried an ePMP 3000L. >>>> >>>>> >>>> >>>>> Real world performance is ultimately about the same as ePMP 2000. >>>> >>>>> QoS doesn't work properly. SM was re registering with a pretty >>>> >>>>> minimal amount of noise. I had 27 DL SNR and 17 UL SNR on a DFS >>>> >>>>> band......it's not going to get a lot better than that where I >>>> am. >>>> >>>>> Not in real life anyway. >>>> >>>>> >>>> >>>>> First AP wouldn't link at 1Gig on a long cable (but would on a >>>> >>>>> short cable). Tried a second AP and that one worked at 1Gig, but >>>> >>>>> then died 4 days later. >>>> >>>>> >>>> >>>>> I got a lot of mileage out of the ePMP 2000 and the PMP450, but >>>> >>>>> this new product does not currently impress. It's sort of a >>>> >>>>> little bit shitty in fact. >>>> >>>>> >>>> >>>>> Maybe they'll bake out some of the issues later. >>>> >>>>> >>>> >>>>> >>>> >>>>> >>>> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> >>> >>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
