What about using something like this? https://www.menards.com/main/building-materials/concrete-cement-masonry/bagged-concrete-cement-mortar/fast-2k-trade-quick-foam-post-anchor-2-9-lb/1894030/p-1526970580634-c-5648.htm?tid=1606715208629456470&ipos=1
From: AF <[email protected]> On Behalf Of Chuck McCown via AF Sent: Thursday, June 17, 2021 9:31 AM To: AnimalFarm Microwave Users Group <[email protected]> Cc: Chuck McCown <[email protected]> Subject: Re: [AFMUG] Handhole / vault recommendation I would think carve it with a wire cutter. Polyurethane is pretty expensive foam. From: Adam Moffett Sent: Thursday, June 17, 2021 4:04 AM To: [email protected]<mailto:[email protected]> Subject: Re: [AFMUG] Handhole / vault recommendation So do you carve a handhole pocket out of a solid block, or mold the styrofoam with a handhole pocket built in? I wonder if you could mold your own out of polyurethane foam. https://www.fibreglast.com/product/2lb-Mix-And-Pour-Foam?gclid=Cj0KCQjw5auGBhDEARIsAFyNm9HWb1-WKMvpV4NJobUzWOFaDRUJVW8DnQHnezAOVTeMb29vpJGHUdsaAizlEALw_wcB On 6/16/2021 6:11 PM, Chuck McCown via AF wrote: Google direct buries most of their splice enclosures with a locate ball. I am thinking of making a large cube of styrofoam that has a pocket for the splice case. Direct bury it all with a locate ball. Need back in, just cut the sod and pull out the styrofoam. The strength of a block of styrofoam is in the same range of firm to stiff soil. Lot less money than a handhole. You could use a hot blade and cut it up to get it out if you needed the slack coil. From: Jason McKemie Sent: Wednesday, June 16, 2021 12:07 PM To: AnimalFarm Microwave Users Group Subject: [AFMUG] Handhole / vault recommendation I've been using the Carson / Oldcastle 2200-18 vaults with a 6" extension, but everything is backordered 30+ weeks. Does anyone have any alternate suggestions for a vault to hold a FOSC 450A splice closure? HDPE would probably be preferable, but I could do a concrete polymer if necessary. Thanks. ________________________________ -- AF mailing list [email protected]<mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com ________________________________ -- AF mailing list [email protected]<mailto:[email protected]> http://af.afmug.com/mailman/listinfo/af_af.afmug.com ________________________________ Total Control Panel Login<https://portal.reflexion.net/login?domain=litewire.net> To: [email protected]<https://portal.reflexion.net/address-properties?aID=242260993&domain=litewire.net> From: [email protected]<mailto:[email protected]> You received this message because the domain afmug.com is on your allow list.
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
