If you wrapped your splice case and slack loops with film then the foam would not stick. I sure don’t want to have to deal with foam stuck on everything.
From: Carl Peterson Sent: Thursday, June 17, 2021 1:26 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] Handhole / vault recommendation Instead of a styrofoam block, just get a polyurethane foam injection setup like they use to lift concrete. Squirt some foam around the case, shave the top a few inches below grade, and then cover it with dirt and sod. On Thu, Jun 17, 2021 at 2:00 PM Seth Mattinen <[email protected]> wrote: On 6/17/21 11:21 AM, Adam Moffett wrote: > I used a polyurethane foam like that for a post to hold up two solar > panels. Worked fine there. Not that brand, something from home depot. > > Sika PostFix -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- Carl Peterson PORT NETWORKS 401 E Pratt St, Ste 2553 Baltimore, MD 21202 (410) 637-3707 -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
