Prism AC radios On Fri, Feb 18, 2022, 7:05 AM Josh Luthman <[email protected]> wrote:
> Can you ping FROM one radio TO another radio and make sure that's good or > not? > > Could be bandwidth/usage. Could be an RF issue. Do you have a way to > look at any of the RF stats? > > >5GHz link with excellent signal and noise floor > > If it's Ubnt don't believe that fake ass noise floor. Are you tracking > the modulation by chance? It's probably not getting less than 6 ms because > of the 802.11 product, but that's just a guess. > > On Thu, Feb 17, 2022 at 10:19 PM Jaime Solorza <[email protected]> > wrote: > >> basically what i figured ,thx >> Jaime Solorza >> Wireless Systems Architect >> 915-861-1390 >> >> >> On Thu, Feb 17, 2022 at 7:47 PM Steve Jones <[email protected]> >> wrote: >> >>> narrower channel, better power density, less interference >>> depends on throughput demand >>> >>> On Thu, Feb 17, 2022 at 8:43 PM Jaime Solorza <[email protected]> >>> wrote: >>> >>>> We picked up a project for the Ft. Bliss Water which also handles >>>> McGregor and Dona Ana Ranges... >>>> Using MDS 900Mhz FHSS radios at 125kbps...ping times to all points, >>>> even through repeaters 1-2ms pings average..when pulling data from >>>> PLCs...they hit 2-4ms but then return to 1-2... >>>> Have a 16.5 miles ptp 5GHz link with excellent signal and noise >>>> floor...pings are 6-450ms and never below 6! Using 40Mhz wide channel... >>>> What do you think is issue? Interference in the band? >>>> Thx >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
