At 16.5 miles thirty Mhz doesn't work well...I have tried both ptp...might go back to it... I am the installer not the WISP owner...tomorrow I will make changes
On Fri, Feb 18, 2022, 10:11 AM Josh Luthman <[email protected]> wrote: > So start by your ping test between radios and make sure it's the RF link > (you do have to have both radios in the same IP subnet). > > I think those AC radios will tell you live modulation graphs, watch that > for a bit. Bandwidth, too. > > What kind of bandwidth do you need? Doing 40 MHz wide is pretty wasteful > and as said, you could be the source of your issues/interference - a 10/20 > MHz would be more spectral efficient, give you a better signal, and could > solve your problem. > > On Fri, Feb 18, 2022 at 11:27 AM Jaime Solorza <[email protected]> > wrote: > >> Prism AC radios >> >> On Fri, Feb 18, 2022, 7:05 AM Josh Luthman <[email protected]> >> wrote: >> >>> Can you ping FROM one radio TO another radio and make sure that's good >>> or not? >>> >>> Could be bandwidth/usage. Could be an RF issue. Do you have a way to >>> look at any of the RF stats? >>> >>> >5GHz link with excellent signal and noise floor >>> >>> If it's Ubnt don't believe that fake ass noise floor. Are you tracking >>> the modulation by chance? It's probably not getting less than 6 ms because >>> of the 802.11 product, but that's just a guess. >>> >>> On Thu, Feb 17, 2022 at 10:19 PM Jaime Solorza < >>> [email protected]> wrote: >>> >>>> basically what i figured ,thx >>>> Jaime Solorza >>>> Wireless Systems Architect >>>> 915-861-1390 >>>> >>>> >>>> On Thu, Feb 17, 2022 at 7:47 PM Steve Jones <[email protected]> >>>> wrote: >>>> >>>>> narrower channel, better power density, less interference >>>>> depends on throughput demand >>>>> >>>>> On Thu, Feb 17, 2022 at 8:43 PM Jaime Solorza < >>>>> [email protected]> wrote: >>>>> >>>>>> We picked up a project for the Ft. Bliss Water which also handles >>>>>> McGregor and Dona Ana Ranges... >>>>>> Using MDS 900Mhz FHSS radios at 125kbps...ping times to all points, >>>>>> even through repeaters 1-2ms pings average..when pulling data from >>>>>> PLCs...they hit 2-4ms but then return to 1-2... >>>>>> Have a 16.5 miles ptp 5GHz link with excellent signal and noise >>>>>> floor...pings are 6-450ms and never below 6! Using 40Mhz wide channel... >>>>>> What do you think is issue? Interference in the band? >>>>>> Thx >>>>>> -- >>>>>> AF mailing list >>>>>> [email protected] >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>> -- >>>>> AF mailing list >>>>> [email protected] >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
