Cars and trucks these days use connectors that have built-in
moisture/debris shields. You can get those (both male and female) at
many auto parts stores.
bp
<part15sbs{at}gmail{dot}com>
On 1/10/2023 9:59 AM, Chuck McCown via AF wrote:
I build a piece of industrial equipment. Currently the motion control
PCB is in the steering column. I am thinking of potting it and
putting it underneath the chassis. Easy to get to etc. But what kind
of connector should I use? Flying leads coming out of the potting
compound into a cannon type connector? Hate to use any connector that
is non ip67, so phoenix plugs are out.
Not sure I am going to do this but we are kicking it around. I might
just leave it where it is. It has phoenix connectors now with wires
and ferules going to screw down terminals etc.
Best Regards,
Chuck McCown
McCown Technology Corporation
8401 N Commerce Dr
Lake Point, Utah 84074
801-250-9503 Office
435-830-4306 Cell
www.mccowntech.com
www.microtrench.pro
www.terabitnetworks.com
--
AF mailing list
[email protected]
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
