I will take a look, thanks. From: Paul Dowling Sent: Tuesday, January 10, 2023 12:13 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] question for the borg
Take a look at Weipo connectors. IP68 on the SP series I have. I have some SP17 9 or 10 pin connectors if you'd like me to send you a few to play with. They will take 18 ga wire. Few pins will take up to 14 ga in that series. Paul -- Paul Dowling [email protected] Believe Broadband www.believebroadband.com (410) 902-0070 x115 On Tue, Jan 10, 2023 at 2:05 PM Chuck McCown via AF <[email protected]> wrote: Mostly 18 ga but some 14. From: Paul Dowling Sent: Tuesday, January 10, 2023 11:07 AM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] question for the borg Also, what gauge wire? -- Paul Dowling [email protected] Believe Broadband www.believebroadband.com (410) 902-0070 x115 On Tue, Jan 10, 2023 at 1:00 PM Chuck McCown via AF <[email protected]> wrote: I build a piece of industrial equipment. Currently the motion control PCB is in the steering column. I am thinking of potting it and putting it underneath the chassis. Easy to get to etc. But what kind of connector should I use? Flying leads coming out of the potting compound into a cannon type connector? Hate to use any connector that is non ip67, so phoenix plugs are out. Not sure I am going to do this but we are kicking it around. I might just leave it where it is. It has phoenix connectors now with wires and ferules going to screw down terminals etc. Best Regards, Chuck McCown McCown Technology Corporation 8401 N Commerce Dr Lake Point, Utah 84074 801-250-9503 Office 435-830-4306 Cell www.mccowntech.com www.microtrench.pro www.terabitnetworks.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com ------------------------------------------------------------------------------ -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com -------------------------------------------------------------------------------- -- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
