Take a look at Weipo connectors. IP68 on the SP series I have. I have some SP17 9 or 10 pin connectors if you'd like me to send you a few to play with. They will take 18 ga wire. Few pins will take up to 14 ga in that series.
Paul -- Paul Dowling [email protected] Believe Broadband www.believebroadband.com (410) 902-0070 x115 On Tue, Jan 10, 2023 at 2:05 PM Chuck McCown via AF <[email protected]> wrote: > Mostly 18 ga but some 14. > > *From:* Paul Dowling > *Sent:* Tuesday, January 10, 2023 11:07 AM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] question for the borg > > Also, what gauge wire? > -- > Paul Dowling > [email protected] > Believe Broadband > www.believebroadband.com > (410) 902-0070 x115 > > > > On Tue, Jan 10, 2023 at 1:00 PM Chuck McCown via AF <[email protected]> > wrote: > >> I build a piece of industrial equipment. Currently the motion control >> PCB is in the steering column. I am thinking of potting it and putting it >> underneath the chassis. Easy to get to etc. But what kind of connector >> should I use? Flying leads coming out of the potting compound into a >> cannon type connector? Hate to use any connector that is non ip67, so >> phoenix plugs are out. >> >> Not sure I am going to do this but we are kicking it around. I might >> just leave it where it is. It has phoenix connectors now with wires and >> ferules going to screw down terminals etc. >> >> Best Regards, >> Chuck McCown >> >> McCown Technology Corporation >> 8401 N Commerce Dr >> Lake Point, Utah 84074 >> 801-250-9503 Office >> 435-830-4306 Cell >> www.mccowntech.com >> www.microtrench.pro >> www.terabitnetworks.com >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > ------------------------------ > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
