13.2 on the SM definitely does not jive with build 32 on the AP. So..
don't do that. I forgot I still had that AP on build 32 until it was too
late. SMs would pop in session for about 2 seconds and go down again.
Luckily updating the AP to 13.2 official fixed it.
I'm also seeing 5GHz SMs losing freqs. But it's funny, like 99% of them
only lose 5767.5 and 5807.5. I try to avoid the 2.5 centers whenever I
can since I've noticed exactly what you guys are seeing here in the
past, ALL of the 2.5 centers disappear. I don't use 5MHz bandwidth, and
I usually lock the scan list on the SM down to the band the AP is
operating in. So maybe that's why I was losing only a couple freqs.
On 11/13/2014 9:12 PM, Ryan Ray via Af wrote:
It's crazy. No warning, no release notes about it. How does this come
out of all the betas and you lose your SM's because a frequency isn't
checked...
On Thu, Nov 13, 2014 at 7:09 PM, timothy steele via Af <[email protected]
<mailto:[email protected]>> wrote:
Yeah I noticed that same with 5Ghz looks like they unchecked the
rarely used channels in SM with 13.2 programmer was probably
thinking he was helping but lots are going to complain
—
Sent from Mailbox <https://www.dropbox.com/mailbox>
On Thu, Nov 13, 2014 at 10:06 PM, Ryan Ray via Af <[email protected]
<mailto:[email protected]>> wrote:
Just did a >200 group of SM's and the upgrade has removed
frequencies that were previously checked. I followed the guide
and did the SM's first and AP's last. Luckily the majority of
these can see another AP but what the fuck...
About half of these SM's were on 13.2(34) and the other half
were on 13.1.3...
This is what it looks like after an update
<image.png>
Pre update they were all
<image.png>
URG
