Some info for Cambium on the build 32 thing. I had the SMs on that
sector locked down to the bandwidth and frequency of the AP. This is
where I was having a ton of registration issues and the 2+ minute scan
was a PITA. Anyway... when these SMs on 13.2 official tried to register
to the AP when it was on build 32, ALL of them kept watchdog resetting
over and over. I tried rebooting the AP first and they still did it.
Updated the AP to official and they are calm now. I did have one SM on
the AP scanning everything and it did not watchdog reset.
So the scan list thing. I haven't attempted any 2.4 or 3.6 450's yet.
Still working my way through 5GHz. I just went through every SM that
updated and so far looks like every single one lost no 5.4 freqs and
only 5767.5 and 5807.5.
I'm stopping for tonight because one disaster was narrowly averted, I
don't need another one.
Oh, plus about 90% of the APs are booting up using iGPS. But you guys
already know about that and there's nothing I can do about it.. well
there is but it sucks.
On 11/13/2014 9:24 PM, George Skorup (Cyber Broadcasting) via Af wrote:
13.2 on the SM definitely does not jive with build 32 on the AP. So..
don't do that. I forgot I still had that AP on build 32 until it was
too late. SMs would pop in session for about 2 seconds and go down
again. Luckily updating the AP to 13.2 official fixed it.
I'm also seeing 5GHz SMs losing freqs. But it's funny, like 99% of
them only lose 5767.5 and 5807.5. I try to avoid the 2.5 centers
whenever I can since I've noticed exactly what you guys are seeing
here in the past, ALL of the 2.5 centers disappear. I don't use 5MHz
bandwidth, and I usually lock the scan list on the SM down to the band
the AP is operating in. So maybe that's why I was losing only a couple
freqs.
On 11/13/2014 9:12 PM, Ryan Ray via Af wrote:
It's crazy. No warning, no release notes about it. How does this come
out of all the betas and you lose your SM's because a frequency isn't
checked...
On Thu, Nov 13, 2014 at 7:09 PM, timothy steele via Af <[email protected]
<mailto:[email protected]>> wrote:
Yeah I noticed that same with 5Ghz looks like they unchecked the
rarely used channels in SM with 13.2 programmer was probably
thinking he was helping but lots are going to complain
—
Sent from Mailbox <https://www.dropbox.com/mailbox>
On Thu, Nov 13, 2014 at 10:06 PM, Ryan Ray via Af <[email protected]
<mailto:[email protected]>> wrote:
Just did a >200 group of SM's and the upgrade has removed
frequencies that were previously checked. I followed the
guide and did the SM's first and AP's last. Luckily the
majority of these can see another AP but what the fuck...
About half of these SM's were on 13.2(34) and the other half
were on 13.1.3...
This is what it looks like after an update
<image.png>
Pre update they were all
<image.png>
URG
