My iPhone cut me off.. The fact that his SM did not automatically reconnect to the frequency it was connected to is the major bug them not being checked out of box I understand but somthing went bad wrong when they compiled the final
— Sent from Mailbox On Thu, Nov 13, 2014 at 10:24 PM, George Skorup (Cyber Broadcasting) via Af <[email protected]> wrote: > 13.2 on the SM definitely does not jive with build 32 on the AP. So.. > don't do that. I forgot I still had that AP on build 32 until it was too > late. SMs would pop in session for about 2 seconds and go down again. > Luckily updating the AP to 13.2 official fixed it. > I'm also seeing 5GHz SMs losing freqs. But it's funny, like 99% of them > only lose 5767.5 and 5807.5. I try to avoid the 2.5 centers whenever I > can since I've noticed exactly what you guys are seeing here in the > past, ALL of the 2.5 centers disappear. I don't use 5MHz bandwidth, and > I usually lock the scan list on the SM down to the band the AP is > operating in. So maybe that's why I was losing only a couple freqs. > On 11/13/2014 9:12 PM, Ryan Ray via Af wrote: >> It's crazy. No warning, no release notes about it. How does this come >> out of all the betas and you lose your SM's because a frequency isn't >> checked... >> >> On Thu, Nov 13, 2014 at 7:09 PM, timothy steele via Af <[email protected] >> <mailto:[email protected]>> wrote: >> >> Yeah I noticed that same with 5Ghz looks like they unchecked the >> rarely used channels in SM with 13.2 programmer was probably >> thinking he was helping but lots are going to complain >> >> — >> Sent from Mailbox <https://www.dropbox.com/mailbox> >> >> >> On Thu, Nov 13, 2014 at 10:06 PM, Ryan Ray via Af <[email protected] >> <mailto:[email protected]>> wrote: >> >> Just did a >200 group of SM's and the upgrade has removed >> frequencies that were previously checked. I followed the guide >> and did the SM's first and AP's last. Luckily the majority of >> these can see another AP but what the fuck... >> >> About half of these SM's were on 13.2(34) and the other half >> were on 13.1.3... >> >> This is what it looks like after an update >> >> <image.png> >> >> >> Pre update they were all >> >> <image.png> >> >> >> URG >> >> >>
