Quality? On Jan 22, 2015 7:39 PM, "Craig House" <[email protected]> wrote:
> Ok done. I have a -56 signal at the SM attached is a screenshot of the > analysis. -75 around the channel that I am on with the apj > > So that is not the problem. Why would I have only 15% to 40% uplink > capacity when I have 95-100% capacity and a -56 signal > > > > > > ------------------------------ > *From: *"Mike Hammett" <[email protected]> > *To: *[email protected] > *Sent: *Thursday, January 22, 2015 6:20:07 PM > *Subject: *Re: [AFMUG] Epmp newbee > > Have Java installed, run that program. Connect to that radio. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > > ------------------------------ > *From: *"Craig House" <[email protected]> > *To: *[email protected] > *Sent: *Thursday, January 22, 2015 5:55:54 PM > *Subject: *Re: [AFMUG] Epmp newbee > > So I switch the AP to Spectrum analyzer mode and reboot. Got to the spec > analyzer tab and click download tool. How do I use it. It is a separate > utility that my laptop doesn't know how to use the file? > > > > ------------------------------ > *From: *"Josh Luthman" <[email protected]> > *To: *[email protected] > *Sent: *Thursday, January 22, 2015 5:39:34 PM > *Subject: *Re: [AFMUG] Epmp newbee > > Monitor wireless might have a scan what you're after. I think that's only > compatible (ie TDD OR wifi not both) networks seen. > > Uplink issue, noise and all that basic rf stuff? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Jan 22, 2015 6:07 PM, "Craig House" <[email protected]> wrote: > >> I've been using cambium/Motorola FSK products now for 10 years but the >> EPMP product has a few things that I can't quite get to work >> The main one that concerns me is that I'm using an integrated SM and at >> any distance from the tower I can make it connect as long as I know the >> SSID. But what is the trick to making it show available SS IDs to connect >> to sort of like the scan available access points feature in ubiquity? >> >> The second question is that even a very close distances and was very good >> signals like -53 I have difficulty getting good uplink capacity the quality >> seems to be reasonable 90% or above but the capacity varies from 15% to 45% >> most of the time and it's obvious in the speed test that the uplink is not >> doing what it should >> What am I doing wrong photo is attached of what I'm talking about in the >> second question >> >> >> >> Sent from my iPhone >> > > > >
