I probably could do that in the middle of the night Sent from my iPhone
> On Jan 22, 2015, at 19:35, CBB - Jay Fuller <[email protected]> wrote: > > > Just curious ; can you turn the other 2.4 off for 5 minutes and see if your > quality improves? > > ----- Original Message ----- > From: Craig House > To: [email protected] > Sent: Thursday, January 22, 2015 6:39 PM > Subject: Re: [AFMUG] Epmp newbee > > Ok done. I have a -56 signal at the SM attached is a screenshot of the > analysis. -75 around the channel that I am on with the apj > > So that is not the problem. Why would I have only 15% to 40% uplink capacity > when I have 95-100% capacity and a -56 signal > > > > > > From: "Mike Hammett" <[email protected]> > To: [email protected] > Sent: Thursday, January 22, 2015 6:20:07 PM > Subject: Re: [AFMUG] Epmp newbee > > Have Java installed, run that program. Connect to that radio. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > > > From: "Craig House" <[email protected]> > To: [email protected] > Sent: Thursday, January 22, 2015 5:55:54 PM > Subject: Re: [AFMUG] Epmp newbee > > So I switch the AP to Spectrum analyzer mode and reboot. Got to the spec > analyzer tab and click download tool. How do I use it. It is a separate > utility that my laptop doesn't know how to use the file? > > > > From: "Josh Luthman" <[email protected]> > To: [email protected] > Sent: Thursday, January 22, 2015 5:39:34 PM > Subject: Re: [AFMUG] Epmp newbee > > Monitor wireless might have a scan what you're after. I think that's only > compatible (ie TDD OR wifi not both) networks seen. > Uplink issue, noise and all that basic rf stuff? > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 >> On Jan 22, 2015 6:07 PM, "Craig House" <[email protected]> wrote: >> I've been using cambium/Motorola FSK products now for 10 years but the EPMP >> product has a few things that I can't quite get to work >> The main one that concerns me is that I'm using an integrated SM and at any >> distance from the tower I can make it connect as long as I know the SSID. >> But what is the trick to making it show available SS IDs to connect to sort >> of like the scan available access points feature in ubiquity? >> >> The second question is that even a very close distances and was very good >> signals like -53 I have difficulty getting good uplink capacity the quality >> seems to be reasonable 90% or above but the capacity varies from 15% to 45% >> most of the time and it's obvious in the speed test that the uplink is not >> doing what it should >> What am I doing wrong photo is attached of what I'm talking about in the >> second question >> >> >> >> Sent from my iPhone > > > >
