The radio for the subscriber unit was in my vehicle I didn't leave it at a customer site today I was only doing testing with it and don't have it out in the field anymore
Sent from my iPhone > On Jan 22, 2015, at 19:15, Josh Luthman <[email protected]> wrote: > > Do a link test? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > >> On Jan 22, 2015 7:59 PM, "Craig House" <[email protected]> wrote: >> Yes sorry. Capacity is bad. Quality is good >> >> Sent from my iPhone >> >>> On Jan 22, 2015, at 18:57, Josh Luthman <[email protected]> wrote: >>> >>> Quality? >>> >>>> On Jan 22, 2015 7:39 PM, "Craig House" <[email protected]> wrote: >>>> Ok done. I have a -56 signal at the SM attached is a screenshot of the >>>> analysis. -75 around the channel that I am on with the apj >>>> >>>> So that is not the problem. Why would I have only 15% to 40% uplink >>>> capacity when I have 95-100% capacity and a -56 signal >>>> >>>> >>>> >>>> >>>> >>>> From: "Mike Hammett" <[email protected]> >>>> To: [email protected] >>>> Sent: Thursday, January 22, 2015 6:20:07 PM >>>> Subject: Re: [AFMUG] Epmp newbee >>>> >>>> Have Java installed, run that program. Connect to that radio. >>>> >>>> >>>> >>>> ----- >>>> Mike Hammett >>>> Intelligent Computing Solutions >>>> http://www.ics-il.com >>>> >>>> >>>> >>>> From: "Craig House" <[email protected]> >>>> To: [email protected] >>>> Sent: Thursday, January 22, 2015 5:55:54 PM >>>> Subject: Re: [AFMUG] Epmp newbee >>>> >>>> So I switch the AP to Spectrum analyzer mode and reboot. Got to the spec >>>> analyzer tab and click download tool. How do I use it. It is a separate >>>> utility that my laptop doesn't know how to use the file? >>>> >>>> >>>> >>>> From: "Josh Luthman" <[email protected]> >>>> To: [email protected] >>>> Sent: Thursday, January 22, 2015 5:39:34 PM >>>> Subject: Re: [AFMUG] Epmp newbee >>>> >>>> Monitor wireless might have a scan what you're after. I think that's only >>>> compatible (ie TDD OR wifi not both) networks seen. >>>> >>>> Uplink issue, noise and all that basic rf stuff? >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>>> On Jan 22, 2015 6:07 PM, "Craig House" <[email protected]> wrote: >>>>> I've been using cambium/Motorola FSK products now for 10 years but the >>>>> EPMP product has a few things that I can't quite get to work >>>>> The main one that concerns me is that I'm using an integrated SM and at >>>>> any distance from the tower I can make it connect as long as I know the >>>>> SSID. But what is the trick to making it show available SS IDs to connect >>>>> to sort of like the scan available access points feature in ubiquity? >>>>> >>>>> The second question is that even a very close distances and was very good >>>>> signals like -53 I have difficulty getting good uplink capacity the >>>>> quality seems to be reasonable 90% or above but the capacity varies from >>>>> 15% to 45% most of the time and it's obvious in the speed test that the >>>>> uplink is not doing what it should >>>>> What am I doing wrong photo is attached of what I'm talking about in the >>>>> second question >>>>> >>>>> >>>>> >>>>> Sent from my iPhone >>>> >>>> >>>> >>>>
