Yes I'm using a 90° sector and that AP is 180 feet up Sent from my iPhone
> On Jan 22, 2015, at 19:28, John Woodfield <[email protected]> wrote: > > That noise floor is horrible. I usually don't see it that bad even at 200' in > the air. Are you using a sector? > > > > John Woodfield Delmarva WiFi http://www.delmarvawifi.com cell (410) 708-1937 > > > -----Original Message----- > From: "Craig House" <[email protected]> > Sent: Thursday, January 22, 2015 7:59pm > To: "[email protected]" <[email protected]> > Subject: Re: [AFMUG] Epmp newbee > > Yes sorry. Capacity is bad. Quality is good > > Sent from my iPhone > > On Jan 22, 2015, at 18:57, Josh Luthman <[email protected]> wrote: > > Quality? >> On Jan 22, 2015 7:39 PM, "Craig House" <[email protected]> wrote: >> Ok done. I have a -56 signal at the SM attached is a screenshot of the >> analysis. -75 around the channel that I am on with the apj >> So that is not the problem. Why would I have only 15% to 40% uplink >> capacity when I have 95-100% capacity and a -56 signal >> From: "Mike Hammett" <[email protected]> >> To: [email protected] >> Sent: Thursday, January 22, 2015 6:20:07 PM >> Subject: Re: [AFMUG] Epmp newbee >> Have Java installed, run that program. Connect to that radio. >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> >> From: "Craig House" <[email protected]> >> To: [email protected] >> Sent: Thursday, January 22, 2015 5:55:54 PM >> Subject: Re: [AFMUG] Epmp newbee >> So I switch the AP to Spectrum analyzer mode and reboot. Got to the spec >> analyzer tab and click download tool. How do I use it. It is a separate >> utility that my laptop doesn't know how to use the file? >> From: "Josh Luthman" <[email protected]> >> To: [email protected] >> Sent: Thursday, January 22, 2015 5:39:34 PM >> Subject: Re: [AFMUG] Epmp newbee >> Monitor wireless might have a scan what you're after. I think that's only >> compatible (ie TDD OR wifi not both) networks seen. >> Uplink issue, noise and all that basic rf stuff? >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >>> On Jan 22, 2015 6:07 PM, "Craig House" <[email protected]> wrote: >>> I've been using cambium/Motorola FSK products now for 10 years but the EPMP >>> product has a few things that I can't quite get to work >>> The main one that concerns me is that I'm using an integrated SM and at any >>> distance from the tower I can make it connect as long as I know the SSID. >>> But what is the trick to making it show available SS IDs to connect to sort >>> of like the scan available access points feature in ubiquity? >>> >>> The second question is that even a very close distances and was very good >>> signals like -53 I have difficulty getting good uplink capacity the quality >>> seems to be reasonable 90% or above but the capacity varies from 15% to 45% >>> most of the time and it's obvious in the speed test that the uplink is not >>> doing what it should >>> What am I doing wrong photo is attached of what I'm talking about in the >>> second question >>> >>> >>> Sent from my iPhone
