Just curious ; can you turn the other 2.4 off for 5 minutes and see if your quality improves?
----- Original Message ----- From: Craig House To: [email protected] Sent: Thursday, January 22, 2015 6:39 PM Subject: Re: [AFMUG] Epmp newbee Ok done. I have a -56 signal at the SM attached is a screenshot of the analysis. -75 around the channel that I am on with the apj So that is not the problem. Why would I have only 15% to 40% uplink capacity when I have 95-100% capacity and a -56 signal ------------------------------------------------------------------------------ From: "Mike Hammett" <[email protected]> To: [email protected] Sent: Thursday, January 22, 2015 6:20:07 PM Subject: Re: [AFMUG] Epmp newbee Have Java installed, run that program. Connect to that radio. ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ------------------------------------------------------------------------------ From: "Craig House" <[email protected]> To: [email protected] Sent: Thursday, January 22, 2015 5:55:54 PM Subject: Re: [AFMUG] Epmp newbee So I switch the AP to Spectrum analyzer mode and reboot. Got to the spec analyzer tab and click download tool. How do I use it. It is a separate utility that my laptop doesn't know how to use the file? ------------------------------------------------------------------------------ From: "Josh Luthman" <[email protected]> To: [email protected] Sent: Thursday, January 22, 2015 5:39:34 PM Subject: Re: [AFMUG] Epmp newbee Monitor wireless might have a scan what you're after. I think that's only compatible (ie TDD OR wifi not both) networks seen. Uplink issue, noise and all that basic rf stuff? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 22, 2015 6:07 PM, "Craig House" <[email protected]> wrote: I've been using cambium/Motorola FSK products now for 10 years but the EPMP product has a few things that I can't quite get to work The main one that concerns me is that I'm using an integrated SM and at any distance from the tower I can make it connect as long as I know the SSID. But what is the trick to making it show available SS IDs to connect to sort of like the scan available access points feature in ubiquity? The second question is that even a very close distances and was very good signals like -53 I have difficulty getting good uplink capacity the quality seems to be reasonable 90% or above but the capacity varies from 15% to 45% most of the time and it's obvious in the speed test that the uplink is not doing what it should What am I doing wrong photo is attached of what I'm talking about in the second question Sent from my iPhone
