[image: Inline image 1] Looks good. As I said before with regular POE it works fine, seems like there may be soemthing up with the Packetflux Injectors.. Hopefully forrest will answer.
Erich Kaiser North Central Tower Consulting [email protected] Office: 630-621-4804 Cell: 630-777-9291 On Thu, Feb 12, 2015 at 6:26 PM, TJ Trout <[email protected]> wrote: > What does the cable test say? (on the airfiber cable test menu) > > On Thu, Feb 12, 2015 at 4:25 PM, Erich Kaiser <[email protected] > > wrote: > >> I have tried both, the pin out paperwork says it does support the >> Airfiber. It is working fine. Except Ethernet TX issue. >> >> Erich Kaiser >> North Central Tower Consulting >> [email protected] >> Office: 630-621-4804 >> Cell: 630-777-9291 >> >> On Thu, Feb 12, 2015 at 6:23 PM, TJ Trout <[email protected]> wrote: >> >>> What are you using for poe injection? The POE-8-GIG? Or the AF specific >>> packetflux single port injector? The regular 8 port or the sync injectors >>> can't send enough power according to forrest. I guess it wasn't worth >>> spending $5 extra for some higher current relays :) >>> >>> On Thu, Feb 12, 2015 at 4:20 PM, Erich Kaiser < >>> [email protected]> wrote: >>> >>>> Anyone else seen any issues with the Airfiber Module or running the >>>> Airfiber through the Gigabit POE Injector. I am seeing an issue with TX >>>> data, RX works fine, getting full bandwidth. TX I get about 2Mbps. Hooked >>>> up to Regular POE and everything is fine, any ideas? >>>> >>>> >>>> Erich Kaiser >>>> North Central Tower Consulting >>>> [email protected] >>>> Office: 630-621-4804 >>>> Cell: 630-777-9291 >>>> >>> >>> >> >
