Guys this is not my first rodeo, This is the new Gigabit 8 Port Injector and I have also tried the Packetflux Airfiber Injector, same issue, switch to stock UBNT POE and it works fine. This is an all DC site, with separate DC to DC converters and everything is fused.....
See POE directions direct from Packetflux [image: Inline image 1] Erich Kaiser North Central Tower Consulting [email protected] Office: 630-621-4804 Cell: 630-777-9291 On Thu, Feb 12, 2015 at 6:45 PM, Bill Prince <[email protected]> wrote: > It should not work with a regular POE injector. 50 watts is too much > current for 4 pins; you need to supply power on all 8 pins. And that, in > turn, requires transformers to isolate the data lines. > > So I would not expect it to work at all with a vanilla POE. Well, maybe > it might work for a little while, and it would probably only do 100baseT. > Then the 4/5 & 7/8 pins will fry. > > bp > <part15sbs{at}gmail{dot}com> > > > On 2/12/2015 4:20 PM, Erich Kaiser wrote: > > Anyone else seen any issues with the Airfiber Module or running the > Airfiber through the Gigabit POE Injector. I am seeing an issue with TX > data, RX works fine, getting full bandwidth. TX I get about 2Mbps. Hooked > up to Regular POE and everything is fine, any ideas? > > > Erich Kaiser > North Central Tower Consulting > [email protected] > Office: 630-621-4804 > Cell: 630-777-9291 > > >
