It should not work with a regular POE injector. 50 watts is too much
current for 4 pins; you need to supply power on all 8 pins. And that,
in turn, requires transformers to isolate the data lines.
So I would not expect it to work at all with a vanilla POE. Well, maybe
it might work for a little while, and it would probably only do
100baseT. Then the 4/5 & 7/8 pins will fry.
bp
<part15sbs{at}gmail{dot}com>
On 2/12/2015 4:20 PM, Erich Kaiser wrote:
Anyone else seen any issues with the Airfiber Module or running the
Airfiber through the Gigabit POE Injector. I am seeing an issue with
TX data, RX works fine, getting full bandwidth. TX I get about
2Mbps. Hooked up to Regular POE and everything is fine, any ideas?
Erich Kaiser
North Central Tower Consulting
[email protected] <mailto:[email protected]>
Office: 630-621-4804
Cell: 630-777-9291
