Probably something similar to this http://www.ciwireless.com/product/pipe-to-pipe-clamp-set-for-1-12-in-3-12-in-od-pipes-14-in-thick-set-of-2/
They also work great for Grain legs. Erich Kaiser North Central Tower Consulting [email protected] Office: 630-621-4804 Cell: 630-777-9291 On Fri, Feb 13, 2015 at 9:23 PM, Chuck McCown <[email protected]> wrote: > OK, but for the first product out the door, I am trying to pick the > best size. I can later offer the different size but we gotta get the > product out there on beta test. I am leaning strongly towards 2.875” as > you really don’t want larger dishes on small towers. A dish large enough > to want 4.5” is not going to be too happy hanging off the side of a 45G. > > *From:* Bill Prince <[email protected]> > *Sent:* Friday, February 13, 2015 5:44 PM > *To:* [email protected] > *Subject:* Re: [AFMUG] Pipe Mounts > > If I need something bigger than what is on the MTOW-P, I would want 3 > sizes, 2.875" OD, 3.5" OD, and 4.5" OD. Depends on the dish/sector. > > bp > <part15sbs{at}gmail{dot}com> > > > On 2/13/2015 11:46 AM, [email protected] wrote: > > I am doing this universal pipe mount that will allow a larger dish on a > Rohn type or crappy sheet metal freestanding type. > > And doing the larger version of the M-TOW-P > > The question is, what size pipe? > I had initially designed it with 3 inch pipe which is actually 3.5” OD. > Looking at the pipe chart, 2.5” has an OD of 2.875”. > > The smaller pipe would be noticeably lighter to heft. Is that large > enough to make SAF type mounts happy? > Or would y’all rather have the larger pipe. > > >
