We have a similar product to those now. But my new stuff is totally different.
From: Erich Kaiser Sent: Friday, February 13, 2015 8:28 PM To: [email protected] Subject: Re: [AFMUG] Pipe Mounts Probably something similar to this http://www.ciwireless.com/product/pipe-to-pipe-clamp-set-for-1-12-in-3-12-in-od-pipes-14-in-thick-set-of-2/ They also work great for Grain legs. Erich Kaiser North Central Tower Consulting [email protected] Office: 630-621-4804 Cell: 630-777-9291 On Fri, Feb 13, 2015 at 9:23 PM, Chuck McCown <[email protected]> wrote: OK, but for the first product out the door, I am trying to pick the best size. I can later offer the different size but we gotta get the product out there on beta test. I am leaning strongly towards 2.875” as you really don’t want larger dishes on small towers. A dish large enough to want 4.5” is not going to be too happy hanging off the side of a 45G. From: Bill Prince Sent: Friday, February 13, 2015 5:44 PM To: [email protected] Subject: Re: [AFMUG] Pipe Mounts If I need something bigger than what is on the MTOW-P, I would want 3 sizes, 2.875" OD, 3.5" OD, and 4.5" OD. Depends on the dish/sector. bp <part15sbs{at}gmail{dot}com> On 2/13/2015 11:46 AM, [email protected] wrote: I am doing this universal pipe mount that will allow a larger dish on a Rohn type or crappy sheet metal freestanding type. And doing the larger version of the M-TOW-P The question is, what size pipe? I had initially designed it with 3 inch pipe which is actually 3.5” OD. Looking at the pipe chart, 2.5” has an OD of 2.875”. The smaller pipe would be noticeably lighter to heft. Is that large enough to make SAF type mounts happy? Or would y’all rather have the larger pipe.
