Thanks Gino. This is a good read. http://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/TE_1208S.html
On Wed, Apr 15, 2015 at 11:24 AM, Gino Villarini <[email protected]> wrote: > Mpls TE using Telco Systems > > Gino A. Villarini > @gvillarini > > > > On Apr 14, 2015, at 6:25 PM, Sam Lambie <[email protected]> wrote: > > We currently have a Dragonwave Dual Mounted 2+0 PTP setup that is Ether > channeled with Cisco switches. Currently each radio link is at 300 mbps. > Easy to Ether channel as they are the same sized pipe. Once you get into > links of differing throughput, then Ether Channel will fill up to the > smallest pipe and the rest is wasted. > In the the next month, we are going to install another 2+0 link in the > same direction that should have up to 1.2 gb aggregate on that link alone. > And 600 mbps on the DW link. So my question is how to essentially bond both > links of differing sizes without wasting wireless throughput. Is there > something better than Ether channel? > > > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>
