I'll read that. It's highly unlikely that our customers will be able to
hear two of our towers under our conditions but I want to make sure our
ePMP APs don't clash with our APs on another tower or APs used by
another operator.
Faisal Imtiaz wrote:
Jay,
There is a very nice document on channel planning on the EPMP site (same place
where they have firmware).
It discusses the different issues with sync and channel planning.
The issue in your case is not so much the AP to AP potential interference (sync
makes sure that all AP's tx at the same time, as long as the BW ratios are the
same on the AP's).
The issue will be more ..can the CPE Hear both AP's at the same time ?, There
needs to be channel separation so that when the CPE hears AP1, it is not
hearing AP2 on the same channel as interference..
Regards
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: [email protected]
----- Original Message -----
From: "Jay Weekley" <[email protected]>
To: "Animal Farm" <[email protected]>
Sent: Wednesday, May 6, 2015 6:45:25 PM
Subject: [AFMUG] ePMP sync
Does channel size affect sync between towers with ePMP? For example, if
we have two towers with 2.4 ePMP that have line of sight to each other
but one is on 20 MHz wide channels and the other on 10 will they clash
with each other?
