Is 192.168.100.1 and 108.165.x.x both on the vlan interface? Or one bridge1 and one vlan100?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jun 9, 2015 at 10:36 PM, Brett A Mansfield < li...@silverlakeinternet.com> wrote: > The public IPs are not on a VLAN. The subnet is 108.165.x.0/24. > > I currently have eth1-eth7 bridged. Bridge1 is where I have the public > IPs. Bridge1 VLAN 100 is the private IPs of 192.168.100.0/24. I don't use > the SFP+ ports yet. Eth8 is the internet port. It has an IP address of > 108.165.x.246/30. I currently have this confit on an UBNT edgerouter and it > works flawlessly other than the random panics of the OS. The local public > subnet is routed. > > Thank you, > Brett A Mansfield > > On Jun 9, 2015, at 8:29 PM, Josh Luthman <j...@imaginenetworksllc.com> > wrote: > > Are the public IPs on the VLAN 100 interface? > > Need some configuration here. What are the device's IPs/subnets? What is > the Mikrotik's LAN/vlan100 IP/subnet? What about WAN? Is the local "LAN" > public subnet routed to the rest of the world? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Jun 9, 2015 at 10:27 PM, Brett A Mansfield < > li...@silverlakeinternet.com> wrote: > >> I am fairly new to Mikrotik and I cannot get it to do what I want. I >> have the CCR1036-8G-2S+. I have one VLAN using private IPs. It’s VLAN >> 100. I also have a /24 subnet of public IPs. I have NAT setup for the >> VLAN because it does need internet access. I have no NAT on the untagged >> VLAN of public IPs. I can access the net using VLAN 100, but not the >> public IPs. Anyone else run into this or have any ideas or thoughts? >> >> I’ve tried both Static and Dynamic IPs. I have NOT tried to removing the >> VLAN 100 yet. I will give that a shot later today. I do not have any kind >> of firewall on here just yet. >> >> Thank you, >> Brett A Mansfield >> Silver Lake Internet, LLC >> > >