All UBNT. Almost every model XM and XW and a few dozen of their AC line. Thank you, Brett A Mansfield
> On Jun 9, 2015, at 9:31 PM, George Skorup <[email protected]> wrote: > > What radios? > >> On 6/9/2015 9:44 PM, Brett A Mansfield wrote: >> The public is on bridge1. VLAN 100 is a layer on top of bridge1. So public >> is not tagged and VLAN 100 is, both on bridge1. I have each CPE getting an >> IP address on VLAN 100 and bridging the public to the customers router. >> >> Thank you, >> Brett A Mansfield >> >> On Jun 9, 2015, at 8:39 PM, Josh Luthman <[email protected]> wrote: >> >>> Is 192.168.100.1 and 108.165.x.x both on the vlan interface? Or one >>> bridge1 and one vlan100? >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>>> On Tue, Jun 9, 2015 at 10:36 PM, Brett A Mansfield >>>> <[email protected]> wrote: >>>> The public IPs are not on a VLAN. The subnet is 108.165.x.0/24. >>>> >>>> I currently have eth1-eth7 bridged. Bridge1 is where I have the public >>>> IPs. Bridge1 VLAN 100 is the private IPs of 192.168.100.0/24. I don't use >>>> the SFP+ ports yet. Eth8 is the internet port. It has an IP address of >>>> 108.165.x.246/30. I currently have this confit on an UBNT edgerouter and >>>> it works flawlessly other than the random panics of the OS. The local >>>> public subnet is routed. >>>> >>>> Thank you, >>>> Brett A Mansfield >>>> >>>> On Jun 9, 2015, at 8:29 PM, Josh Luthman <[email protected]> >>>> wrote: >>>> >>>>> Are the public IPs on the VLAN 100 interface? >>>>> >>>>> Need some configuration here. What are the device's IPs/subnets? What >>>>> is the Mikrotik's LAN/vlan100 IP/subnet? What about WAN? Is the local >>>>> "LAN" public subnet routed to the rest of the world? >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Tue, Jun 9, 2015 at 10:27 PM, Brett A Mansfield >>>>> <[email protected]> wrote: >>>>>> I am fairly new to Mikrotik and I cannot get it to do what I want. I >>>>>> have the CCR1036-8G-2S+. I have one VLAN using private IPs. It’s VLAN >>>>>> 100. I also have a /24 subnet of public IPs. I have NAT setup for the >>>>>> VLAN because it does need internet access. I have no NAT on the >>>>>> untagged VLAN of public IPs. I can access the net using VLAN 100, but >>>>>> not the public IPs. Anyone else run into this or have any ideas or >>>>>> thoughts? >>>>>> >>>>>> I’ve tried both Static and Dynamic IPs. I have NOT tried to removing >>>>>> the VLAN 100 yet. I will give that a shot later today. I do not have >>>>>> any kind of firewall on here just yet. >>>>>> >>>>>> Thank you, >>>>>> Brett A Mansfield >>>>>> Silver Lake Internet, LLC >
