http://community.cambiumnetworks.com/t5/PMP-450/Screws-not-in-all-the-way-cannot-close-SM/m-p/42441#U42441
We have a whole bunch of these. Just use the force and screw the hell
out of any that have the phillips head screws installed. I've been able
to make them all work.
On 8/21/2015 10:54 PM, Ryan Ray wrote:
So I'm setting up 30 new 3.65 SM's and I'm at number 10 and so far
I've got one where the cover will not seal because instead of the
proper screw at the top someone replaced it with a huge phillips head
which stops the cover from properly going on.
The second unit I was taking the cap off and the tab broke after
putting a tiny bit of pressure on it to get the cap off.
In another batch I have a 2.4 with a radio not calibrated message and
one where the antenna was not spot welded on so it just rattles around
inside the case.
Some serious quality control needs to happen Cambium. This is the
worst I've ever seen. What's the RMA process now? I'm going to go
through the other 20 of these radios and I guess I need to batch ship
a bunch of broken / poor quality / EXPENSIVE PAPERWEIGHTS back...
On Tue, Aug 18, 2015 at 2:39 PM, Matt Mangriotis
<[email protected]
<mailto:[email protected]>> wrote:
It could have affected PTP 450 units as well. We will definitely
let you know if it has.
-----Original Message-----
From: Af [mailto:[email protected]
<mailto:[email protected]>] On Behalf Of Matt
Sent: Tuesday, August 18, 2015 3:43 PM
To: [email protected] <mailto:[email protected]>
Subject: Re: [AFMUG] New Cambium 450 SM's dying after a couple of
days with"ADI communication error"
> Sorry for not talking about this much, but during our investigation,
> we wanted to make sure we were covering all the bases. It does
appear
> to be an isolated manufacturing defect. We are working to
narrow down
> and publish the MAC address list of potentially affected units, and
> should have this within a few days.
>
> Unfortunately, this could be a latent issue, and units may not fail
> right away. More details to follow.
Great news that we will have a list. Will this affect any PTP450
units? Thanks!
